Page 2 - LE-366 User’s Manual; Copyright; All trademarks are the property of their respective holders.
LE-366 User’s Manual -1- Copyright Copyright 2006. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protec...
Page 3 - Packing List; Please check the package before you starting setup the system.; User’s Manual x 1; Floppy Cable x 1
LE-366 User’s Manual -2- Packing List Please check the package before you starting setup the system. Hardware: LE-366 series motherboard x 1 Cable Kit: Printed Matters: User’s Manual x 1 Driver CD x 1 Floppy Cable x 1 44-pin ATA33 IDE Cable x 1 44pin 44pin 40pin Power Cable x 1 PS2 keyboard & mo...
Page 4 - Index
LE-366 User’s Manual -3- Index Chapter 1 <Introduction> .................................................................... 6 1.1 <Product Overview> ...............................................................................6 1.2 <Product Specification> ..........................
Page 5 - Contact Information
LE-366 User’s Manual -4- A.7 <PS/2 Keyboard & Mouse Port> ..........................................................35 Appendix B <Flash BIOS> ................................................................ 37 B.1 BIOS Auto Flash Tool ...................................................
Page 7 - Low Power Consumption; embedded OS and up to DDR SDRAM.; Single Voltage Input; without the huge power supply.
LE-366 User’s Manual - 6 - Chapter 1 <Introduction> 1.1 <Product Overview> LE-366 is the Mini-ITX motherboard with AMD Geode LX800 platform, with onboard VGA, AC97 audio, GIGA LAN interface. Based on the AMD Geode LX800 processor, the board provides many advanced features for reduced pow...
Page 8 - General Specification; VGA Display Interface
LE-366 User’s Manual - 7 - 1.2 <Product Specification> General Specification Form Factor 145 mm x 102 mm (5.7” x 4”) CPU Up to AMD Geode LX 800 Processor Memory One So-DIMM slot support DDR 266/333/400 MHz SDRAM up to 1GB Chipset AMD Geode CS5536 BIOS Phoenix-Award 4Mb PnP Flash Green Function...
Page 9 - Connector; Expansive Interface; PCI; Power and Environment; temperature with 0; Ordering Code
LE-366 User’s Manual - 8 - Connector External Audio phone jack for Line-out and MIC-in. Onboard audio connector with pin header Expansive Interface PCI 1 Mini-PCI slot V2.2 33/66 MHz 1 Compact Flash (optional) Power and Environment Power Requirement 12V DC Jack power connector Temperature Operating ...
Page 11 - DDR DIMM
LE-366 User’s Manual -10- 1.4 <Block Diagram> FlashBIOS (SST FW H) 16Mbx16 DDR DIMM MiniPCI SLOT IDE X 1 CFD X 1 4 x USB2.0 ports 83627HF PCI BUS/33Mhz AMD Geode LX Processo r AMD Geod e CS5536 CRT COM1 KB & MS Digital I/O Slim FDD COM2 RealTek RTL8110SB LAN1 ALC203 AUDIO JACK LVDS
Page 12 - JP1 CN2 J7 J6 MIC1 JSPK1
LE-366 User’s Manual - 11 - Chapter 2 <Hardware Setup> 2.1<Connector Location> P1 CN1 J8 CN9 P2 CN4 JP2 JP3 CN7 USB2 USB1 LAN1 FDD1 MPCI1 CN8 CN3 J4 JP1 CN2 J7 J6 MIC1 JSPK1 LAN1 USB1 PS2 COM VGA MIC LINE OUT
Page 13 - Clear CMOS Selection
LE-366 User’s Manual -12- <Jumper Reference> Jumper Function JP1 LVDS Panel Voltage Selection (+5V / + 3.3V) JP2 COM2 RS232/422/485 Select JP3 COM2 RS232/422/485 Select J4 Clear CMOS Selection J7 CFD Master/Slave Selection JP2 JP3 RS-232 RS-485 RS-422 JP3 JP2 J4 J7 JP1 5 6 1 2 1 3 10 12
Page 15 - supports non-ECC unbuffered memory modules.
LE-366 User’s Manual - 14 - 2.2 <CPU and Memory Setup> 2.2.1 <CPU Setup> The board integrates AMD Geode LX800 500MHz processor with special design for power appliance. It requires only 3.8W power consumption at most, and is totally designed for fan-less system. 2.2.2 <Memory Setup>...
Page 16 - Normal Operation; Mode; Slave
LE-366 User’s Manual - 15 - 2.5 <CMOS Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values. Jumper: J4 Type: Onboard 3-pin jumper J4 Mode 1-2 Normal Operat...
Page 17 - Compact Flash Type II socket on the solder side.; CF
LE-366 User’s Manual -16- 2.3 <Enhanced IDE & CF Interface> The board has one Ultra DMA33 IDE interface to support up to 2 ATAPI devices, and one Compact Flash Type II socket on the solder side. CF
Page 18 - to connect the floppy device.
LE-366 User’s Manual - 17 - 2.4 <Floppy Port> The board provides a slim type floppy port; please use the 26-pin FPC cable in the package to connect the floppy device. FDD 4. Lift up this plastic bar 5. Slot the cable in (Blue paste for outside) 6. Press back the plastic bar Floppy rear side 1....
Page 19 - following specified functions:; CRT
LE-366 User’s Manual -18- 2.8 <Onboard Display Interface> The board integrates AMD Geode LX800 processor with built-in 2D video engine, to provide onboard DB15 VGA connector, 18-bit LVDS interface. The built-in 2D video engine supports following specified functions: ● High-performance 2D graph...
Page 20 - LCDVCC
LE-366 User’s Manual - 19 - 2.4.2 <Digital Display> The board provides one 30-pin LVDS connector for 18-bit single channel panel, supports up to 1024 x 768 of resolution, with one LCD backlight inverter connector and one jumper for panel voltage setting Connector: JP1 Type: 3-pin Power select ...
Page 21 - GND
LE-366 User’s Manual -20- Connector: CN_LVDS (CN2) (for 18 bit Single channel LVDS panel) Type: 30-pin header (15 x 2 pitch 2.0 mm) Connector model: Hirose DF13-40DP-1.25V Pin Assignment Pin Assignment 1 BKL_EN 2 BKL_CTL 3 LVDS_VCC 4 GND 5 LVDS_CH1_CLK- 6 LVDS_CH1_CLK+ 7 LVDS_VCC 8 GND 9 LVDS_CH1_DA...
Page 22 - local cable manufacture to make cables.; LCD Installation Guide:; LCD panel; and the; backlight inverter; Panel side
LE-366 User’s Manual - 21 - To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight power. 3. A LCD cable and an inverter cable. For the cables, please follow the pin assignment of the connector to make a cable, because every panel has it...
Page 23 - The panel type mapping is list below:; Panel Number Resolution
LE-366 User’s Manual -22- After setup the devices well, you need to select the LCD panel type in the BIOS. The panel type mapping is list below: Panel Number Resolution 1 640 x 480 2 800 x 600 3 1024x 768
Page 24 - provides up to 480Mbps of transferring rate.; Interface; Transfer Rate; USB
LE-366 User’s Manual - 23 - <USB2.0 Interface> Based on AMD CS5536, the board provides 2 x USB2.0 ports. The USB2.0 interface provides up to 480Mbps of transferring rate. Interface USB2.0 Controller CS5536 Transfer Rate Up to 480Mb/s Output Voltage 500mA USB
Page 25 - purpose I/O port for system control like POS or KIOSK.; Pin
LE-366 User’s Manual -24- 2.5 <GPIO Interface> The board provides a programmable 8-bit digital I/O interface; you can use this general purpose I/O port for system control like POS or KIOSK. Connector: CN8 Type: onboard 2 x 6-pin header, pitch=2.0mm Pin Assignment 1 GPI 2 GPO 3 GPI 4 GPO 5 GPI ...
Page 27 - The; ATX; ATAPI Drives
LE-366 User’s Manual - 26 - 2.7 <Power and Fan Connector> The LE-366 provides a standard ATX power supply with 20-pin ATX connector, and the board provides one 4-pin P4 additional use power connector for internal power supply and one 3-pin cooler fan connector for system. 2.6.1 <Power Input...
Page 28 - Ground; SYSFAN
LE-366 User’s Manual - 27 - 2.7.3 <Fan Connector> Connector: SYSFAN Type: 3-pin fan wafer connector Connector: DC_IN Type: 2-pin DC power connector Pin Description Pin Description 1 +12V 2 +12V 3 Ground 4 Ground Pin Description Pin Description Pin Description 1 Ground 2 +12V 3 Fan Control SYSF...
Page 29 - JFRNT; POWER
LE-366 User’s Manual - 28 - 2.8 <Indicator and Switch> The JFRNT provides front control panel of the board, such as power button, reset and beeper, etc. Please check well before you connecting the cables on the chassis. Connector: CN3 Type: onboard 14-pin (2 x 7) 2.54-pitch header Pin Assignme...
Page 31 - DEL
LE-366 User’s Manual - 30 - Chapter 3 <BIOS Setup> The motherboard uses the Award BIOS for the system configuration. The Award BIOS in the single board computer is a customized version of the industrial standard BIOS for IBM PC AT-compatible computers. It supports Intel x86 and compatible CPU ...
Page 33 - GND
LE-366 User’s Manual -32- Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: J6 Type: 44-pin (22 x 2) box header Pin Assignment Pin Assignment 1 IDERST# 2 GND 3 PID7 4 PID8 5 PID6 6 PID9 7 PID5 8 PID10 9 PID4 10 PID11 11 PID3 12 PID12 13 PID2 14 PID13 15 PID1 16 PID14 17 PID0...
Page 38 - LE-366User’s Manual; B.1 BIOS Auto Flash Tool; Method
LE-366User’s Manual - 37 - Appendix B <Flash BIOS> B.1 BIOS Auto Flash Tool The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below: TU http://www.award.com UT TU http://www.commell.com.tw/support/support.htm...
Page 43 - IN/OUT commands. The following lines show an example how to do this.
LE-366 User’s Manual -42- Appendix D <Programming GPIO’s> The GPIO can be programmed with the MSDOS debug program using simple IN/OUT commands. The following lines show an example how to do this. GPIO0...GPIO7 bit0……bit7 -o 4E 87 ;enter configuration -o 4E 87 -o 4E 2A -o 4F FD ;enable GPIO fun...
Page 44 - Logical Device 8
LE-366 User’s Manual - 43 - Appendix E <Watch Dog timer Setting > The watchdog timer makes the system auto-reset while it stops to work for a period. The integrated watchdog timer can be setup as system reset mode by program. Timeout Value Range - 1 to 255 - Second or Minute Program Sample Wat...
Page 46 - Any advice or comment about our products and service, or anything; Taiwan Commate Computer Inc.; Commell is a brand name of Taiwan Commate Computer INC
LE-366 User’s Manual - 45 - Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business. Taiwan Commate Computer Inc. Address 8F, No. 94, Se...
