Page 2 - reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.
CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION...............................
Page 4 - SAFETY INSTRUCTIONS; Installation
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not use water spray and steam to...
Page 5 - PRODUCT DESCRIPTION; Appliance overview
2.4 Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. ...
Page 6 - CONTROL PANEL; Control panel description
3.3 Fixing plate kit (4055171146) Available from your authorized dealer.If you install the appliance on a plinth, secure the appliance in the fixing plates.Read carefully the instructions supplied with the kit. 3.4 Multilingual badges and knob To install the multilingual badge and the knob, follow t...
Page 7 - Display
4.2 Display A B C D A Temperature area: Temperature indicator Cold water indicator. B Spin area: Spin speed indicator No Spin indicator 1) Rinse Hold indicator 1) Only available for Spin/Drain programme. C Display indicators: Washing phase Rinses phase Spin phase Child safety lock Door lockedYou can...
Page 8 - PROGRAMMES; Programme Chart
D Time area: Programme duration Delay start Alarm codes Message of error Programme is completed 5. PROGRAMMES 5.1 Programme Chart ProgrammeTemperaturerange Maximum loadMaximum spinspeed Programme description(Type of load and soil level) Washing programmes Cottons95°C - Cold 8 kg1600 rpm White cotton...
Page 11 - CONSUMPTION VALUES
Programme 1) 2) 3) Spin/Drain ■ ■ ■ Rinse ■ ■ ■ ■ Jeans ■ ■ ■ ■ 20 min.-3Kg ■ ■ Super Eco ■ ■ ■ ■ Cottons Eco ■ ■ ■ ■ ■ 4) ■ 1) The Stain option is not available with a temperature lower then 40°C. 2) If you set Extra Rinse option, the appliance adds some additional rinses. In the Rinse programme, i...
Page 12 - SETTINGS; Acoustic signals; Permanent Extra Rinse
Programmes Load (kg) Energy con- sumption(kWh) Water con-sumption(litre) Approxi-mate pro-gramme du-ration (mi-nutes) Remainingmoisture(%) 1) Standard cotton programmes Standard 60 °C cot-ton 8 0.90 58 208 43 Standard 60 °C cot-ton 4 0.65 45 156 43 Standard 40 °C cot-ton 4 0.49 44 156 43 1) At the e...
Page 13 - OPTIONS
8. OPTIONS 8.1 Programme knob Turn this knob to set a programme. The related programme indicator comes on. 8.2 Press button to start or interrupt a programme. 8.3 With this option you can delay the start of a programme from 30 minutes to 20 hours.The display shows the related indicator and delay tim...
Page 15 - Setting a programme; Starting a programme
1 2 3. To use powder detergent, turn the flap up. A 4. To use liquid detergent, turn the flap down. B With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit showed in the flap. • Do not set the prewash phase. • Do not...
Page 17 - HINTS AND TIPS; The laundry load
In the display comes on and the doorlocked indicator goes off. The indicator of button goes off. 1. Press button to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. When you activate the appliance again, t...
Page 18 - CARE AND CLEANING
delicate items (e.g. underwired bras, belts, tights, etc. ). • A very small load can cause balance problems with the spin phase. If this occurs, adjust manually the items in the tub and start the spin phase again. 11.2 Stubborn stains For some stains, water and detergent is not sufficient.We recomme...
Page 22 - Frost precautions; TROUBLESHOOTING; Introduction; Possible failures
12.9 Frost precautions If the appliance is installed in an area where the temperature can be less than 0° C, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a conta...
Page 24 - EMERGENCY DOOR OPENING
Problem Possible solution Set the drain or the spin programme if there is water in thedrum. Make sure that the appliance receives electrical power. This problem may be caused by a failure of the appliance.Contact the Authorised Service Centre. If you need to openthe door, please read carefully «Emer...