AEG 59800 - Manual

6 • The covering bonnet of the bulb for the drum light must be screwed down tightly. Child safety • Keep packaging away from children. Risk of suffocation! • Children can often not see the dangers associated with electric ma-chines. Never leave unsupervised children near the dryer. • Ensure that chi...

7 Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recy-cled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facil...

8 2 Environmental tips • In the dryer, laundry becomes fluffy and soft. Fabric softeners are not therefore needed when washing. • Your dryer will function most economically if you: – always keep the ventilation slots on the base of the dryer unob-structed; – use the loading volumes specified in the ...

10 Programme overview Programmes max . lo ad (we igh t when dry ) Additional functions Application/properties Care symbols INTE NSITY (RESTVOCHT) LON G A N TIC R EA SE (A NT I- KR E U K) SIGNAL (ZOEMER ) CO TT ONS (KA TOEN) EXTRA DRY(EXTRA-DROOG) 6 kg • • • Thorough drying of thick or multi-layered ...

12 Before the first drying cycle 1 If the appliance was not transported in an upright position, leave it to stand for 12 hours before connecting it to the electricity supply and us-ing it for the first time, so that the oil can flow back to the compressor. Otherwise the compressor could be damaged. ...

13 Drying Switching machine on / switching light on Turn the programme selector to any programme or turn it to LIGHT (VERLICHTING). The machine has been switched on. When the loading door is opened, the drum is illuminated. Opening loading door / loading laundry 1. Open loading door: Use force to pu...

14 Selecting additional functions INTENSITY (RESTVOCHT) For precise setting of the residual moisture content of the laundry, the degrees of dryness +, ++ or +++ can be set in addition to most programmes. Laundry becomes dri-er from + to +++. 1. Press the INTENSITY (RESTVOCHT) button repeatedly until...

16 Putting in extra items or taking items out before end of programme 1. Open loading door 1 Warning! Laundry and drum can become hot. Risk of burns! 2. Load or remove laundry items. 3. Close loading securely. Lock must audibly lock. 4. Press the START/PAUSE (START/PAUZE) button to continue the dryi...

17 Cleaning and maintenance Cleaning fluff filter To ensure that the dryer works perfectly, the fluff filters (micro-fine fil-ter and fine strainer) must be cleaned after every drying cycle. 1 Caution! Never operate the dryer without fluff filters or with damaged or blocked fluff filters. 1. Open lo...

18 Clean the entire filter area 3 The strainer area does not have to be cleaned after every drying cycle, but should be checked regularly and cleaned of fluff if necessary. 6. To do this, grip the top of the large mesh filter and pull it forwards un-til it comes loose from the two brackets. 7. Remov...

19 Emptying the condensate tank Empty condensate tank after every drying cycle. If the condensate tank is full, an active programme will break off auto-matically and the EMPTY WATER (RESERVOIR) display will light up. In order to continue the programme, the condensate tank must first be emptied. 1 Wa...

20 Cleaning the fluff filter If the indicator CLEAN BASE FILTER (REINIG SOKKELFILTER) lights up, the fluff filter and the filter mat in the base of the appliance must be cleaned. 3 To protect the heat pump from dirt, the dryer is fitted with a special fil-ter mat, which is located in the filter hous...

22 Cleaning the drum 1 Caution! Do not use abrasives or steel wool to clean the drum. 3 Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. The laundry is damper than expe...

24 Changing the bulb for interior lighting Only use a special bulb which is designed specially for dryers. The spe-cial bulb can be obtained from the Customer Care Department, ET no. 112 552 000-5. 3 Important: When the appliance is switched on, the interior lighting switches itself off after 5 minu...

25 Programming options Objective Implementation Permanently programme in the audible signal which reminds you that the programme is com-plete. 1. Turn the programme selector to any programme. 2. Press the SIGNAL (ZOEMER) button and hold down for approx. 5 seconds.A brief signal sounds several times....

26 Technical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Consumption values The consumption ...

28 Transporting the appliance 1 Important: Only tip the appliance on its left side to transport (see il-lustration), if it cannot be trans-ported in an upright position.

29 Removing transport safety equipment 1 Caution! Before first starting up, all parts of the transport safety equipment must be removed. 1. Open loading door 2. Pull off adhesive strips from inside machine on top of drum. 3. Remove foil hose and polystyrene padding from the machine. 1 If the applian...

30 Changing door stop 1 Warning! The door stop may only be changed by a specialist. If neces- sary, please contact our after-sales service or your specialist dealer. Warning! Before changing the door stop, disconnect the mains plug; with a permanent connection: fully unscrew or deactivate the fuse. ...

31 7. Unscrew cover plates E from the front of the machine, rotate through 180, screw on the opposite side. 8. Unscrew door lock F, push down slightly and remove from the front of the machine. 9. Press snap-in button G in and down, press cover down slightly and re-move from front of the machine. 10....

32 Special accessories The following special accessories are available from your Service Force Centre or your specialist dealer: Intermediate installation kits for stacked washer and dryer: These intermediate installation kits can be used to arrange the dryer and an automatic AEG-Electrolux washing ...

33 Guarantee conditions Belgium DECLARATION OF GUARANTEE TERMS.Our appliances are produced with the greatest of care. However, a defect may still occur. Our con-sumer services department will repair this upon request, either during or after the guarantee peri-od. The service life of the appliance wi...

34 withstand the local climatic and environmental conditions. For appliances purchased abroad, the user must first ensure that they meet the qualifications required in Belgium. Non-essential or re-quested adjustments are not covered by the guarantee and are not possible in all cases. Our consumer se...

35 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instruc-tions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service ...