ADTRAN A2.03 - Manual
ADTRAN A2.03 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Configuration; Modify the I3 provided .cfg file as appropriate.; Changing the Configuration:
- Page 6 – media-gateway ip primary
- Page 8 – voice forward-mode network
- Page 11 – This defines the survivability inbound calling direction
- Page 12 – This allows calls to be made in survivability mode
- Page 13 – role network
- Page 14 – every; Putback Transfer; TLS/SRTP is not supported by AdTran for this device at this time.
A2.03 AdTran NetVanta 1355/6355 SIP/TDM/IP Appliance
1 Important Notes
•
Check the
SIP 3
rd
Party Validation Website
for current validation status. The
SIP 3
rd
Part Validation Website
can be viewed at:
•
http://testlab.inin.com
or
http://testlab.vonexus.com
•
It is recommended to make basic changes to the Interactive Intelligence
supplied .cfg file then utilize the command line interface for further
configuration. Not all options are exposed using the web interface.
•
As this unit is a critical piece of the SIP infrastructure, it is highly
recommended that DHCP not be used. A static IP address is the preferred
method and is how the unit was configured during validation.
•
While there are TCP options in the command line, they are not recommended
for use by AdTran, and were not tested.
•
T.38 is supported for 4 concurrent faxes on the Digital span
only
. T.38 is not
supported for the FXO spans.
•
When using managed phones the name of the phone in IA must match the
extension of the phone. This is required because the phone will use the name
in its registration message, and in a standalone failover scenario, the
registration name is how the AdTran device will be able to contact the other
internal stations. If something else is used, internal stations would not be
able to dial other internal stations, because the number dialed would not
match the registration entries.
2 Vendor Documentation
Documentation can be found on the CD shipped with the AdTran NetVanta
1355/6355, or on the AdTran website
http://www.adtran.com
.
3 Validated Firmware Version
A2.03.00.SC.E
4 Install
Download the AdTran NetVanta 1355/6355 files from the Interactive
Intelligence Testlab website for the AdTran:
http://testlab.inin.com/compatibilityfiles_external/production/documents/AdTr
anNetVanta.zip
Contained in the zip file will be the validated version of firmware (.biz), as
well as any supplemental configuration files, and a set of sample (.cfg)
files.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
5 Configuration Methods: • Manipulation of the supplied .cfg file, then uploading it via the web interface. This method is recommended for a quick start scenario. The Interactive Intelligence supplied .cfg file, with just a few modifications will get a basic setup up and running. Please note, the su...
! ! interface eth 0/19 spanning-tree edgeport no shutdown switchport mode trunk ! ! interface eth 0/20 spanning-tree edgeport no shutdown switchport mode trunk ! ! interface eth 0/21 spanning-tree edgeport no shutdown switchport mode trunk ! ! interface eth 0/22 spanning-tree edgeport no shutdown sw...
ip route 192.168.1.250 255.255.255.255 null 0 This route is created specifically for the managed phone option, it will allow the phones to register to a route that is known dead, but required for the device to respond ! no ip tftp server no ip tftp server overwrite ip http server ip http secure-serv...
