2Wire s8300 - Manual
2Wire s8300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Avaya S8300 Media Server and an Avaya G700 Media Gateway:; must
- Page 4 – Software; DS1 Interface
- Page 5 – Figure 2a; Figure 2b; DS1 Circuit Pack Administration
- Page 6 – Create a Trunk Group and select “isdn” as the Group Type and a TAC; Trunk–Group Administration; Signaling Group; Create a Signaling Group for the PRI D-channel. The Group Type
- Page 7 – Assign trunk ports to the Trunk Group. Up to 255 ports can be; Assign trunk Group Members; Typical Cabinet Configuration:
- Page 8 – Determine If System Has Capacities:
- Page 9 – tmd
- Page 10 – yes
- Page 11 – Display Board
- Page 12 – Add Trunk Group Access Codes:; none
- Page 13 – DISABLED; Display Trunk Group Access Codes:
- Page 15 – MSGWCAP MESSAGE WAITING CAPABILITY - CAN SEND MAIL; mdr
- Page 16 – ttt
- Page 18 – prib
- Page 20 – DID DIRECT INWARD DIALING TRUNK; prid
- Page 21 – NI2 NATIONAL ISDN 2
- Page 22 – Display Trunk Members:
Jsl
© 2002 Avaya Inc All Rights Reserved
IP Enabling Siemens
Hicom with Avaya
MultiVantage Solutions
LPH 11-27-02
1
IP Enabling Siemens Hicom 300
With Avaya Solutions Running
MultiVantage™ Software
Configuring a PRI Trunk Connection between an Avaya
S8300
Media Server and an Avaya
G700 Media Gateway running
Avaya MultiVantage™ Software and a Siemens Hicom 300.
Issue 1.0
ABSTRACT
Many multi-location enterprises have telecommunications equipment from
vendors that do not provide a gentle migration path to IP converged platforms.
Avaya’s Enterprise Class IP Solutions (ECLIPS) enable a gradual adoption of
IP technology for Third-party PBXs and enables the adoption of the value-
added capabilities of Avaya’s MultiVantage™ Software while providing a
platform to host future applications that will further enhance the enterprise’s
operations.
Following the instructions in these Application Notes facilitates the Gentle-
Migration of a Siemens Hicom 300 PBX to the Avaya ECLIPS platform running
the Avaya MultiVantage Software for call processing. A minimal amount of
new hardware
is needed to complete the migration including the Avaya™
S8300 Media Server, the Avaya™ G700 Media Gateway, Avaya™ IP
telephones and the new Avaya™ GUI administration tools.
This solution’s return on investment (ROI) is very high because it does not
require a fork-lift removal of existing hardware, capitalizes on existing phone
assets and the users’ knowledge of the existing user interface, and allows the
enterprise to migrate only those users who can best utilize the productivity
enhancing features of the Avaya MultiVantage Software. The platform can
expand to accommodate the entire enterprise’s organization over time at a
pace the customer dictates.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Jsl © 2002 Avaya Inc All Rights Reserved IP Enabling SiemensHicom with AvayaMultiVantage Solutions LPH 11-27-02 3 2. Equipment and Software Validated: The configuration used to test performance of this solution was established in an Avaya Labsetting within the guidelines and use parameters allowed i...
Jsl © 2002 Avaya Inc All Rights Reserved IP Enabling SiemensHicom with AvayaMultiVantage Solutions LPH 11-27-02 4 Software : 1. Recommended Siemens Hicom 300. Release 9006.5 or newer.2. Firmware for the boards and phones are included in the core software. Hardware: 1. TNBN64P and TNDN64 can be progr...
Jsl © 2002 Avaya Inc All Rights Reserved IP Enabling SiemensHicom with AvayaMultiVantage Solutions LPH 11-27-02 5 Figure 2a . MM710 DS1 Circuit Pack Administration Figure 2b . MM710 DS1 Circuit Pack Administration
