Page 2 - We Want You Listening For A Lifetime; Decibel; Level; THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
i Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitementyour equipment offers. This manufacturer and the Electronic Industries Association’s ConsumerElectronics Group wan...
Page 3 - ii; About This Product; Video System of a Connected Component; Important; After-sales Service for Pioneer Products; CANADA
ii For U.S. and Canadian Models About This Product Video System of a Connected Component This product is compatible with the NTSC system. When connecting other componentsto this product, be sure components are compatible with the same video systems. If it isnot, images will not be correctly reproduc...
Page 4 - IMPORTANT SAFEGUARDS; Keep this manual handy for future reference.
iii Before Using IMPORTANT SAFEGUARDS PLEASE READ ALL OF THESE INSTRUCTIONS REGARDING YOUR DISPLAY AND RETAIN THEM FOR FUTURE REFERENCE 1. Read this manual fully and carefully before operating your display. 2. Keep this manual handy for future reference. 3. Pay close attention to all warnings in thi...
Page 5 - Before Using
Page 6 - Contents
Contents 1 Dear Customer .............................................. iFor U.S. and Canadian Models .................... ii - About This Product - Important - Precaution IMPORTANT SAFEGUARDS ........................ iii - PLEASE READ ALL OF THESEINSTRUCTIONS REGARDING YOUR DISPLAY AND RETAIN THEM ...
Page 7 - Operation of the Display:
2 Before Using This Product About This Product [For European models] Video System of a Connected Component [For models except U.S. and Canadian models] This product is NTSC/PAL system compatible. When connecting other components tothis product, be sure components are compatible with the same video s...
Page 8 - To Ensure Safe Driving; WARNING; Precaution
3 Before Using To Ensure Safe Driving WARNING • To avoid the risk of accident and the potential violation of applicable laws, this product is not for use with a video screen that is visible to the driver. • In some countries or states the viewing of images on a display inside a vehicle even by perso...
Page 9 - In Case of Trouble; Resetting; Press the RESET button.
4 Before Using In Case of Trouble Should this product fail to operate properly, contact your dealer or nearest authorized PioneerService Station. Preventing the Battery from Becoming Exhausted When using this product, be sure your car engine is running. If you use this product whenyour engine is not...
Page 10 - Detaching and Replacing the Front Panel; Detaching the Front Panel; Replacing the Front Panel
5 Before Using Detaching and Replacing the Front Panel Theft Protection The front panel of this product is detachable to discourage theft. When the front panel is detached, this product will not be operable as the front panel contains the Signal receptor and OPEN/CLOSE button that are necessary for ...
Page 11 - Key Finder
6 Before Using Key Finder The following diagram shows the display when it is deployed. Display V.SOURCE button WIDE button RGB button RESET button OPEN/CLOSE button ANGLE buttons
Page 12 - Operation of the Display; Deploying the Display
7 Operation of the Display • Turn your vehicle’s engine ON. The display will be automatically deployed by the automatic close/open mode. If the display is not automatically deployed, press the OPEN/CLOSE button. Note: • The automatic close/open mode will operate the display as follows. * When the ig...
Page 13 - Screen Angle Adjustment
8 Operation of the Display The angle of this product’s screen continues changing as long as you keep pressing theANGLE button. • Adjust the screen to an easily viewable angle. Precaution: • If you can hear the display knocking against your vehicle’s console or dashboard, press the ANGLE button on th...
Page 14 - Closing the Display
9 Operation of the Display • Turn the vehicle’s engine OFF. The display will be automatically closed by the automatic close/open mode. If thedisplay does not close automatically, press the OPEN/CLOSE button. Note: • When closing the display, check to make sure that it has closed completely. If the d...
Page 15 - • Select the desired mode in the following order:; Changing the Wide Mode
10 Operation of the Display You can select a desired mode for enlarging a 4:3 picture to a 16:9 one. • Select the desired mode in the following order: Full (FULL) = Just (JUST) = Cinema (CINEMA) = Zoom (ZOOM) = Normal (NORMAL) Full (FULL) A 4:3 picture is enlarged in the horizontal direction only, e...
Page 16 - Switching the Illumination Color (For European models)
11 Operation of the Display This product is equipped with two illumination colors, green and red. You can select thedesired illumination color. • Switch to the desired illumination color. Repeat the preceding operation to switch to the previous color. Hold for 2 seconds Switching the Illumination Co...
Page 17 - • Select the desired video source in following order:; Switching the Video Source
12 Operation of the Display 7 Switching to RGB You can watch videos from a component connected to this produt’s RGB input. • Switch to RGB. Repeat the preceding operation to switch to the previous video source. Note: • If you select the “AVM” video select setting in the display setting menu, video i...
Page 18 - Entering the Display Setting Menu; Enter the Display Setting Menu.; Operating the Setting Menu; Setting the Display
13 Setting the Display Entering the Display Setting Menu Perform display and picture setting with this menu. Enter the Display Setting Menu. Select the desired mode in the following order: VSEL SET = AUTO OPEN = BRIGHT = COLOR* = HUE* = DIMMER To cancel the Display Setting Menu, press the WIDE butto...
Page 19 - Switching the Video Select Setting; Switch to the desired video select setting in the following order:; AUTO; Setting the Automatic Open Mode
14 Setting the Display Switching the Video Select Setting You can change the video select setting. Press the WIDE button and select the video select mode (VSEL SET) inthe Display Setting Menu. Switch to the desired video select setting in the following order: AUTO = MANUAL = AVM 7 AUTO When the Head...
Page 20 - Adjusting the Bright; Adjusting the Color
15 Setting the Display Adjusting the Bright You can adjust the bright of the picture. Press the WIDE button and select the Bright mode (BRIGHT) in theDisplay Setting Menu. Adjust the Bright. Note: • The density of the display black can be adjusted within the range of “–24” to “+24.”• The adjustment ...
Page 21 - Adjusting the Hue; Adjusting the Dimmer
16 Setting the Display Adjusting the Hue You can adjust the hue of the picture. Press the WIDE button and select the Hue mode (HUE) in the DisplaySetting Menu. Adjust the Hue. Note: • The display changes within a range from “–24” to “+24” as the distinction of the picture changes from reddish to gre...
Page 22 - CAUTION; • If you notice smoke, a strange noise or smell, or any other abnormal; Handling the Display; Using the Display Correctly; Others
17 CAUTION • If moisture or foreign matter should get inside the product, turn OFF the power immediately and consult your dealer or the nearest autho-rized PIONEER Service Station. Using the product in this conditionmay result in a fire or electric shock, or other failure. • If you notice smoke, a s...
Page 23 - About the Small Fluorescent Tube
About the Liquid Crystal Display (LCD) Screen • If the display is near the vent of an air conditioner when it is deployed, make sure that air from the air conditioner is not blowing on it. Heat from the heater maybreak the LCD screen, and cool air from the cooler may cause moisture to forminside the...
Page 24 - Appendix; Specifications; General
19 Appendix Appendix Specifications General Power source .... 14.4 V DC (10.8 – 15.1 V allowable)Grounding system .................................. Negative typeMax. current consumption ...................................... 4 ADimensions (DIN) (chassis) ...... 180 (W) × 50 (H) × 160 (D) mm [7-1/8 ...
Page 28 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, California 90801, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY....
