Zanussi ZWF14380W- User Manual

• Heating phase During the washing cycle the display shows a temper- ature icon to indicate that the appliance has started the heating phase of the water in the tub. 5.3:• Child safety lock This device permits you to leave the appliance unat- tended during it's functioning. First use • Ensure that t...

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into themain wash compartment or in the appropriate com- partment if the selected programme/option it requires (see more details in "Detergent dispenser drawer"). If required, pour fabric soft...

Altering an option or a running programme It is possible to change some options before the pro- gramme carries them out. Before you make any change, you must PAUSE the ap- pliance by pressing the button 6 . Changing a running programme is possible only by re- setting it. Turn the programme selector ...

Washing programmes Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Detergent drawer Cottons 90° Main wash - Rinses Maximum spin speed 1200 rpm for model ZWF 12380W (1400 for model ZWF 14380W ) Max. load 7 kg - Redu...

Problem Possible cause/Solution Spinning starts late or the machine does not spin: The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the un...

Consumption values Programme Energy consumption (KWh) Water consumption (litres) Programme duration (Mi- nutes) White Cottons 90° 2,2 65 For the duration of the pro- grammes, please refer to the display on the control panel. Cottons 60° 1.4 62 Cotton ECO 60° 1) 1,19 52 Cottons 40° 1,2 57 Synthetics ...

Replace the drawer and run the rinse programme with- out any clothes in the drum. Cleaning the pump The pump should be inspected regularly and particular- ly if:• the appliance does not empty and/or spin;• the appliance makes an unusual noise during drain- ing due to objects such as safety pins, coi...

Cleaning the water inlet filters Important! If the appliance doesn't fill, takes long to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..." for more details), check if the water inlet filters are blocked ....

The other end of the inlet hose which connects to the appliance can be turned as showed in the picture. Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap. Set the hose correctly by loosening the ring nut. After positioning the inle...

1 2 3 4 1 Green & Yellow 2 Brown 3 Cord clamp 4 Blue The wire coloured green and yellow must be connected to the terminal marked with the letter «E» or by theearth symbol or coloured green and yellow. The wire coloured blue must be connected to the termi- nal «N» or coloured black. The wire colo...