Zanussi ZT485- User Manual

In this fully integrated appliance the controls arelocated on the top of the door. When selecting aprogramme, the door needs to be open. Audible signals have been introduced to help indicatewhich operations the dishwasher is performing. Short signal "instruction accepted" When any of the but...

Before using your dishwasher for the first time: ensure that the electrical and water connections comply with the installation instructions remove all packaging from inside the appliance set the water softener fill the salt container fill the rinse aid dispenser. Setting the water softener The dishw...

Filling with salt Salt must be used from level 2 upward. Only use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of thecompl...

Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, spot and streak free drying.The dispenser, which is positioned inside the door, holdsabout 110 ml of rinse aid, which is sufficient for 16 - 40dishwashing programmes, depending upon the dosagesetting. Filling...

Use of detergent Only use detergents specificallydesigned for use in dishwashers. We recommend the use of Finish detergents which areavailable in the following options: Finish Double Action Tablets. Each tablet has the exactamount of detergent required, simply place in thedispenser. Finish Powder re...

Loading your appliance Before placing dishes in the machine, remove any scrapsof food, to avoid clogging the filters and consequentlyreducing the performance. Do not load very small items whichcan fall through the baskets. Open the door and slide out the baskets to load thedishes. The lower basket T...

The upper basket The upper basket is designed for plates (dessert plates,saucers, dinner plates of up to 24 cm in diameter), saladbowls, cups and glasses; Glasses with long stems can beplaced upside down in the raised cup racks. The cup rack on the left folds upwards to increase yourloading flexibil...

To save energy Place dishes in the machine immediately after everymeal and wait until the dishwasher is full beforewashing. If necessary run the Rinse and Hold programme (see"Washing Programmes" chart on the following page),so that any food scraps do not become caked on thedishes while you a...

Washing programmes 14 PWP11UK Programme Degree of soil and type of load Heavy soil.Crockery, cutlerypots and pans Normal soil.Crockery andcutlery Light soil.Crockery andcutlery Required pushbuttons Cycle description Recommended quantity of detergent in the dispenser in the SID INTENSIVE 70°c * NORMA...

1. Check the filters Ensure they are clean and properly positioned (see cleaning instructions). 2. Check that there is rinse aid and salt 3. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange...

Internal cleaning Ensure that the seals around the door, the detergent andrinse aid dispensers are cleaned regularly with a dampcloth. We recommend the use of Finish Dishwasher Cleanerevery 3 months or run a 65°C wash without dishes usingdetergent. Regular use of Finish Dishwasher Cleanercleans inac...

Symptom Fault code Solution The machine will not start ■ The On/Off button has not been pressed. ■ The door has not been properly closed. ■ The plug is not properly inserted in the power socket. ■ Check the plug fuse. ■ There is no current at the socket. The dishwasher does not "Rinse & Hold...

Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereofis proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replacethe same FREE OF CHARGE for labour, mat...

Any electrical work required to installthis appliance should be carried outby a qualified electrician orcompetent person. Any plumbing work required to installthis appliance should be carried outby a qualified plumber or competentperson. Ensure the machine is easily accessible forservicing when inst...

Remove all packaging before positioningthe machine. If possible, position the machine next to a water tap anda drain. Water supply connections This dishwasher must be plumbed into a cold watersupply. The water pressure must be within the limits given inthe technical specifications. Your local Water ...

Electrical connection This appliance must be earthed. The manufacturer declines anyresponsibility should this safety measuresnot be observed. If the plug that is fitted to your appliance is not suitablefor the socket, it must be cut off and the appropriate plugfitted. Important The wires on the main...

The furniture door The door on this appliance is designed for the overlay ofa panel having the following dimensions: Width: 446 mm Height: 664 - 714 mm max Thickness: 20 mm max Weight: 1.5 - 6 kg max The panel height should be no more than indicated,otherwise complete opening of the door will no lon...

Adjusting the door balance After the door panel, the adjustment of the door balancemay be necessary. The door of the dishwasher is balanced when it is openin any position. For this purpose use the two front screws. Open thedoor, remove the caps and screw or unscrew the screws. In this way the tensio...

Kitchen plinth adjustment To allow correct opening of the door it is sometimesnecessary to cut the kitchen plinth. Refer to the cuttingtable. According to dimensions (a) and (b) as shown on thefigure, you will find on the following table the depth (x)of the cut to be made on the plinth. The dimensio...