Page 2 - Contents; Technical specifications
Safety instructions 3 Disposal 3 Economical and ecological dishwashing 3 Installation instructions 4 Fitting under a counter 4 Levelling 4 Water supply connections 4 Security system Aqualock 4 Water outlet hose connection 5 Electrical connection 5 Description of the appliance 6 The control panel 6 P...
Page 3 - Disposal; Safety instructions
It is most important that this instruction book should be retained with the appliance for future reference. Should theappliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure thatthe book is left with the appliance in order that the new owner...
Page 4 - Security system; Inlet hose; Installation instructions
Any electrical and/or plumbing work required to installthis appliance should be carried out by a qualifiedelectrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and adrain. Fitting under a counter (ki...
Page 5 - Water outlet hose connection; Electrical connection
Water outlet hose connection The end of the drain hose can be connected in the followingways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. Hooked over the edge of the sink using the special cu...
Page 6 - Programme selection buttons:; The control panel
Function buttons: in addition to the dishwashing programme selected, the following functions can also be setwith the help of these buttons: - the setting of the water softener, - activation/deactivation of the rinse aid dispenser,- the cancelling of a programme in progress. Programme selection butto...
Page 7 - Indicator lights; Phase indicator lights:; Control indicator lights:
Indicator lights Phase indicator lights: have the following meanings: As soon as you select a washing programme, the phaseindicator lights for that programme will start flashing. As the programme starts, the phase indicator lights turn offexcept for the indicator light of the phase in progress which...
Page 8 - The water softener; b) Setting electronically; Prior to using for the first time
Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...
Page 9 - Filling with dishwasher salt; Rinse aid
Filling with dishwasher salt Only use salt specifically designed for use indishwashers.All other types of salt not specifically designed for use ina dishwasher, especially table salt, will damage the watersoftener.Only fill with salt just before starting one of the completewashing programmes. This w...
Page 10 - In daily use
● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and ...
Page 12 - The products; Use of detergent; Fill with detergent
The products In order to obtain a good wash, it is necessary to use detergents specially designed for dishwashers. To ensure that your dishwasher functions perfectly, Zanussi recommends using Calgonit System, a unique and complete product, tested by millions of householders. Calgonit System includes...
Page 13 - General advice; Special advice; Different kinds of detergent
Detergent tablets Detergent tablets of different brands dissolve at differentspeeds. For this reason some detergent tablets cannotdissolve and develop their full cleaning power during shortprogrammes. Therefore please use long programmes whenusing detergent tablets, to ensure the complete removal of...
Page 14 - Washing programmes
(1) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) Testing programme for EN 50242 (see "Hints for Test Centres&#...
Page 15 - Starting a washing programme
1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Close the dishwasher door 4. Press the On/Off button The On/Off indicator light will come on. 5. Setting and starting the programme Press the button corresponding to the require...
Page 16 - Cleaning the filters; Prolonged periods of non-operation; Frost precautions; Maintenance and cleaning
Clean the external surfaces of the machine and control panelwith a damp soft cloth. If necessary use only neutraldetergents. Never use abrasive products, scouring pads orsolvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinseaid dispensers are cle...
Page 18 - Service and spare parts
...the wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate freely due to wrong arran...
Page 19 - Hints for test centres
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washingprogrammes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt andrinse aid respe...
