Zanussi ZDM16301SA- User Manual

Page 2 - Children and vulnerable people safety

Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ...

Page 3 - Control panel; A B C

to change the fuse in the mains plug, use a13 amp ASTA (BS 1362) fuse. • This appliance complies with the E.E.C. Di- rectives. Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm hous...

Page 4 - Programmes

3 Display 4 Indicators 5 Delay button 6 Function buttons Indicators Description Washing phase indicator. Drying phase indicator. End indicator. Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme operates. Programmes Prog...

Page 5 - Information for test institutes; Before first use; Adjusting the water softener; Electronic adjustment

Information for test institutes For all the necessary information for test performance. send an email to: [email protected] Write down the product number (PNC) that is on the rating plate. Before first use 1. Make sure that the set level of the water softener agrees with the water hardness inyour ar...

Page 6 - Filing the rinse aid dispenser; Daily use; Using the detergent

3 Put 1 litre of water inthe salt container(only for the firsttime). 4 5 6 Caution! Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill thesalt container, start a programme. Filing the rinse aid dispenser 1 2 max 3 4 You can turn the...

Page 8 - Hints and tips; The water softener

3. Close the appliance door. The countdown starts. • The display shows the countdown of the delay start that decreases with steps of1 hour. • The wash indicator goes off. • When the countdown is completed, the pro- gramme starts. – The delay indicator goes off. – The wash indicator comes on. – The d...

Page 9 - Care and cleaning

• Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • Make soft the remaining burned food on the items. • Put hollow items (cups, glasses a...

Page 10 - Cleaning the filters; An incorrect position of the filters; Cleaning the spray arm; with a thin pointed object.; External cleaning; Troubleshooting

Cleaning the filters Important! An incorrect position of the filters can cause bad washing results and damage tothe appliance. 1 B A 2 Remove the filters Aand B from the bot-tom of the appliance. 1 2 3 4 Fully clean the filtersbelow running water. 1 2 5 Put the filters back.Turn the filter Aclockwis...

Page 11 - Dishes are wet; Technical information

With some problems, the display showsan alarm code: • - The appliance does not fill with water. • - The appliance does not drain the wa- ter. • - The anti-flood device is on. Warning! Deactivate the appliance before you do the checks. Problem Possible solution You cannot activate the appliance. Make...

Page 12 - Environment concerns; • Discard correctly the packaging material.

Voltage 220 - 240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.8 / 0.08 ) / (10 / 1.0 ) Water supply 1) Cold water or hot water 2) max. 60 °C Capacity Place settings 6 Power consumption Left-on mode 0.99 W Off-mode 0.10 W 1) Connect the water inlet hose to a water tap with a 3/...

Zanussi ZDM16301SA- User Manual

Table of Contents:

Summary

Other Zanussi Models