Page 2 - Use; Important Safety Information
2 Installation ■ This appliance is heavy. Care should be taken whenmoving it. ■ It is dangerous to alter the specifications or attempt tomodify this product in any way. ■ All packing and transit bolts must be removed beforeuse. Serious damage can occur to the product and toproperty if this is not ad...
Page 3 - Table of Contents; For the User
3 Table of Contents For the User Important Safety Information 2 Description of the Appliance 4 The Control Panel 5 Operating sequence 6-7 Before the first use 6 Load the laundry 6 Measure out the detergent 6 Measure out the additive 6 Select the required programme 7 Start the machine 7 At the end of...
Page 4 - Description of the Appliance; Detergent dispenser drawer
4 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 “Mains-on” light 4 “Options” buttons 5 Program selector dial & ON/OFF switch 6 Door opening handle 7 Filter 8 Adjustable feet Detergent dispenser drawer Prewash Wash Fabric softener 6 1 2 3 4 5 7 8 9 10 11 12 13 14 F...
Page 5 - The Control Panel; Programme Guide; Half load button; Cold Wash button
5 The Control Panel 1 Programme Guide 2 ON/OFF LAMP It lights when the appliance is operating. 3 Half load button Available only for programmes 1 to 5 Pressing this button before starting the intense programthere will be one rinse less which leads to energy andwater saving 4 Cold Wash button Pressin...
Page 6 - Operating Sequence; Measure out the detergent; Measure out the additive
6 6 Operating Sequence Before your first wash, we recommend that you run a cotton cycle at 60°C, without anylaundry in the machine, to remove anymanufacturing residue from the drum and tub.Pour 1/2 a measure of detergent into thedispenser drawer and start the machine. 1. Load the laundry Open the do...
Page 7 - Select the required programme; At the end of the programme
7 7 4. Select the required programme Turn the programme selector dial CLOCKWISE to therequired programme. 5. Start the machine Before starting up the machine check that: ■ the appliance is plugged in ■ the water supply tap is turned on ■ the door and the detergent dispenser drawer areclosed. Pull th...
Page 8 - Washing Programmes; Programmes for cotton and linen
8 Washing Programmes Programmes for cotton and linen Maximum load 5 kg Program. dial position Program Temperature ˚C Degree of soil Compartments to use Description Possible options 1 Whites with prewash 90° Heavy soiled Prewash at 40 ˚C Wash at 90˚C 4 rinses Spin at 500 rpm 2 Whites without prewash ...
Page 9 - Programmes for synthetics, delicates and wool
9 Program. dial position Program Temperature ˚C Degree of soil Compartments to use Description Possible options 8 Mixed Fabrics 60° Heavy soiled Prewash at 40 ˚C Wash at 60˚C 3 rinses Stop with water 9 Non Fast Coloureds 60° Normal soiled Wash at 60˚C 3 rinses Stop with water 10 Synthetics Delicates...
Page 10 - Washing Hints
10 Washing Hints i Do NOT overload the machine. Weigh the laundry thefirst few times you use the appliance. The average weights of the most common items arelisted below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g Tablecloth 400-500 g Serviette 50-100 g Tea towel 70-120 g Linen ha...
Page 11 - Wash Care Symbols; Important Notes
11 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labellingcode is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correctprogramme on your washing machine. WASHING SYMBOL BL...
Page 12 - Maintenance and Cleaning; Descaling; Cleaning the drawer recess
12 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply Descaling The water we normally use contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any la...
Page 13 - Cleaning the filter; The dangers of freezing
13 Cleaning the filter The water drain filter A clean filter is important for the correct functioning ofthe machine, and should therefore be cleaned after everywashing programme. Open the filter door and place a container underneath tocatch any spillage. If the filter is blocked and themachine is un...
Page 14 - Something Not Working; Symptom; Possible causes
14 Mod. ..........Prod. No. ........... Ser. No. ......... Mod........... Ser. P0042 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling outan engineer. Before contacting your Local service Force Centre, please carry ...
Page 16 - Unpacking
16 Unpacking Before starting the machine up, the transport securitybolts must be removed as follows: You are advised to keep all the packaging for re-use incase the appliance has to be transported again. ■ Unscrew and remove the three rear transit bolts(using a spanner). ■ Lay the machine gently on ...
Page 17 - Water drainage
17 17 Positioning Your new Zanussi washing machine has been designedto be permanently plumbed in to you home’s watersupply and drainage system. However, if this is notpossible, it may be connected to suitable existing taps,with the drain hose discharging into the sink. Water inlet There should be a ...
Page 18 - Levelling
18 If the machine is permanently plumbed in, hook the endof the hose into a standpipe installed for the purpose.The standpipe must have an internal diameter of at least40mm in order that there is an air gap between the drainhose and the standpipe. Make sure, that it is designed insuch a way, that th...
Page 19 - Electrical connections; Permanent connection
19 19 Electrical connections Any electrical work required to install this applianceshould be carried out by a qualified electrician.orcompetent person WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, mak...
