Z Grills ZPG-700E-XL - User Manual

5 2. Quick Reference Guide INITIAL STARTUP PROCEDURE • The Initial Startup Procedure must be completed before first use and each time after the grill runs out of wood pellets. NEW GRILL BURN IN • It is important to complete a 45 minute HIGH temperature BURN IN before cooking any food on a new Z Grill...

6 • When cooking meat and fish use food probes to monitor the internal temperature. • Minimum temperatures must be reached to kill bacteria ensuring the meat is safe to eat. It can also indicate how well cooked it is. • Below chart is provided as a reference only. • Check online for more detailed tem...

7 5. Cleaning the Grill Clean the Grill after each use, as accumulation of grease, ash and soot can increase the risk of a grease fire and result in inefficient operation. Grease Tray, Drain & Bucket • Remove foil from the Grease Tray and wipe off any surface grease. • Clean out the the V-shaped d...

8 6. Controller Operation The Controller monitors the Temperature Sensor inside the Grill and turns on/off the Auger Motor and sets the Fire-pot Fan speed. It can take some time for temperatures to stabilise at the desired setting. Avoid frequently adjusting the temperature or opening the lid. The G...

9 8. Main Grill Components 1 Hopper Bottom Assembly 2 Hopper Feed Chute 3 Grill Lid 4 Grill Lid Handle 5 Fire Pot 6 Grill Temperature Sensor 7 Thermal Insulating Sheet 8 Grill Drum 9 Chimney Cap 10 Chimney Stack 11 Chimney Gasket 12 Grease Bucket 13 Grill Base 14 Heat Baffle 15 Grease Tray 16 Main Gr...

16 12. Initial Startup Instructions Follow the initial startup process before first use, and each time after the grill runs out of wood pellets. 13. New Grill Burn-In 1. Remove Grill Racks, Grease Tray and Heat Baffle from the Grill. 2. Open the Pellet Hopper Lid and check to ensure there are no forei...

17 14. Normal Operation How Many Pellets to Pour into the Hopper? 1. The Grill only uses as many Pellets from the Hopper as required to maintain the desired temperature and so WILL NOT use ALL the pellets in the Hopper each time the Grill operates. 2. Don’t fill the Hopper up fully each time it gets ...

21 17. Grill Repair Instructions Component Time Di ffi culty Spare Parts Tools Required Fuse 5 min ! 3A M205 Slow Blow Fuse 5 x20mm * ✓ Phillips head screw driver ✓ Wire snips or scissors Temperature Sensor 5 min ! ZG-700-TSENSOR ✓ Phillips head screw driver ✓ Pliers or small socket/spanner set Contro...

22 This ZPG-700E Electric Pellet Smoker BBQ has been certified to the following standards: Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility 2014/30/EU, EN 60335-1:2012+A11:2014, EN 60335-2-9:2003/A13:2010/AC:2012, EN 55014-1:2017, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013 C...