Z Grills ZPG-7002B - User Manual

5 2. Quick Reference Guide INITIAL STARTUP PROCEDURE • The Initial Startup Procedure must be completed before first use and each time after the grill runs out of wood pellets. NEW GRILL BURN IN • It is important to complete a 45 minute HIGH temperature BURN IN with wood pellets before cooking any foo...

6 • When cooking meat and fish use food probes to monitor the internal temperature. • Minimum temperatures must be reached to kill bacteria ensuring the meat is safe to eat. It can also indicate how well it is cooked. • Check online for more detailed temperature values for the specific food you are co...

7 5. Cleaning the Grill Clean the Grill after each use, as accumulation of grease, ash and soot can increase the risk of a grease fire and result in inefficient operation. Grease Tray, Drain & Bucket • Remove foil from the Grease Tray and wipe off any surface grease. • Clean out the the V-shaped d...

8 6. Controller Operation The Controller monitors the Temperature Sensor inside the Grill and turns on/off the Auger Motor and sets the Fire-pot Fan speed. It can take some time for temperatures to stabilise at the desired setting. Avoid frequently adjusting the temperature or opening the lid. The G...

9 8. Main Grill Components 1 Hopper Bottom Assembly 2 Hopper Feed Chute 3 Grill Lid 4 Grill Temperature Sensor 5 Fire Pot 6 Grill Lid Handle 7 Grill Lid 8 Chimney Cap 9 Chimney Stack 10 Chimney Gasket 11 Grill Drum 12 Grease Bucket 13 Grill Base 14 Heat Baffle 15 Grease Tray 16 Main Grilling Rack 17 ...

10 9. Unpacking & Assembly Instructions The 7002B pellet grill box weighs 62kg, so requires at least 2 people to lift. Unpacking • Do not place painted metal components directly on bricks or concrete as it may scratch the paint. Lay down a sheet of cardboard to sit them on. • It is recommended t...

16 12. Initial Startup Instructions Follow the initial startup process before first use, and each time after the grill runs out of wood pellets. 13. New Grill Burn-In 1. Remove Grill Racks, Grease Tray and Heat Baffle from the Grill. 2. Open the Pellet Hopper Lid and check to ensure there are no forei...

18 If there is a problem with the operation of the Ignition Rod, please order a replacement by contacting the Z Grills Australia team at www.zgrills.com.au. Before ordering a replacement ignition rod, make sure the problem isn’t just an ash filled Fire-pot! It is possible to manually operate the gril...

21 17. Grill Repair Instructions Component Time Di ffi culty Spare Parts Tools Required Fuse 5 min ! 3A M205 Slow Blow Fuse 5 x20mm * ✓ Phillips head screw driver ✓ Wire snips or scissors Temperature Sensor 5 min ! ZG-700-TSENSOR ✓ Phillips head screw driver ✓ Pliers or small socket/spanner set Contro...

22 This ZPG-7002B Electric Pellet Smoker BBQ has been certified to the following standards: Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility 2014/30/EU, EN 60335-1:2012+A11:2014, EN 60335-2-9:2003/A13:2010/AC:2012, EN 55014-1:2017, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013 ...