Page 2 - IMPORTANT SAFETY INFORMATION
2 IMPORTANT SAFETY INFORMATION DANGER! • FLAMMABLE LIQUIDS: Never use or store flammable liquids near the grill, or use flammable liquids to light the grill. • OUTDOOR USE ONLY: Do not operate the grill indoors or in enclosed spaces as carbon-monoxide poisoning may occur. DANGER! • HIGH VOLTAGE ELECTR...
Page 3 - Contents
3 www.zgrills.com.au 3 ZPG-700E Wood Pellet Smoker Grill Owner Manual © Z Grills Australia Pty Ltd - 2019 ZG06.03.01 V1.0 10-2019 Contents 1. Operating Guidelines 4 2. Quick Reference Guide 5 3. Technical Specif ications 6 4. Food Minimum Cooked Temperatures 6 5. Cleaning the Grill 7 6. Controller O...
Page 4 - Operating Guidelines
4 • For convenient and safe assembly, use at least two people to assemble. • DO NOT use the grill in any enclosed area, it is for outdoor use only. • DO NOT use your grill outside on rainy days, it must not get wet. • DO NOT store or use combustible materials or liquids near the grill. • DO NOT move...
Page 5 - Quick Reference Guide
5 2. Quick Reference Guide INITIAL STARTUP PROCEDURE • The Initial Startup Procedure must be completed before first use and each time after the grill runs out of wood pellets. NEW GRILL BURN IN • It is important to complete a 45 minute HIGH temperature BURN IN with wood pellets before cooking any foo...
Page 6 - Food Minimum Temperature Chart; Minimum Safe Internal Temperatures; Minced Beef; Technical Specifications
6 • When cooking meat and fish use food probes to monitor the internal temperature. • Minimum temperatures must be reached to kill bacteria ensuring the meat is safe to eat. It can also indicate how well it is cooked. • Check online for more detailed temperature values for the specific food you are co...
Page 7 - Cleaning the Grill; Grilling Racks; Food Temperature Probes
7 5. Cleaning the Grill Clean the Grill after each use, as accumulation of grease, ash and soot can increase the risk of a grease fire and result in inefficient operation. Grease Tray, Drain & Bucket • Remove foil from the Grease Tray and wipe off any surface grease. • Clean out the the V-shaped d...
Page 8 - Controller Operation; Controller Dial Settings
8 6. Controller Operation The Controller monitors the Temperature Sensor inside the Grill and turns on/off the Auger Motor and sets the Fire-pot Fan speed. It can take some time for temperatures to stabilise at the desired setting. Avoid frequently adjusting the temperature or opening the lid. The G...
Page 9 - Main Grill Components
9 8. Main Grill Components 1 Hopper Bottom Assembly 2 Hopper Feed Chute 3 Grill Lid 4 Grill Temperature Sensor 5 Fire Pot 6 Grill Lid Handle 7 Grill Lid 8 Chimney Cap 9 Chimney Stack 10 Chimney Gasket 11 Grill Drum 12 Grease Bucket 13 Grill Base 14 Heat Baffle 15 Grease Tray 16 Main Grilling Rack 17 ...
Page 10 - Unpacking; Assembly Process; Tools and Fasteners
10 9. Unpacking & Assembly Instructions The 7002B pellet grill box weighs 62kg, so requires at least 2 people to lift. Unpacking • Do not place painted metal components directly on bricks or concrete as it may scratch the paint. Lay down a sheet of cardboard to sit them on. • It is recommended t...
Page 16 - Initial Startup Instructions
16 12. Initial Startup Instructions Follow the initial startup process before first use, and each time after the grill runs out of wood pellets. 13. New Grill Burn-In 1. Remove Grill Racks, Grease Tray and Heat Baffle from the Grill. 2. Open the Pellet Hopper Lid and check to ensure there are no forei...
Page 18 - Changing from High to Low Temperature Setting
18 If there is a problem with the operation of the Ignition Rod, please order a replacement by contacting the Z Grills Australia team at www.zgrills.com.au. Before ordering a replacement ignition rod, make sure the problem isn’t just an ash filled Fire-pot! It is possible to manually operate the gril...
Page 21 - Grill Repair Instructions; Component
21 17. Grill Repair Instructions Component Time Di ffi culty Spare Parts Tools Required Fuse 5 min ! 3A M205 Slow Blow Fuse 5 x20mm * ✓ Phillips head screw driver ✓ Wire snips or scissors Temperature Sensor 5 min ! ZG-700-TSENSOR ✓ Phillips head screw driver ✓ Pliers or small socket/spanner set Contro...
Page 22 - Limited Product Warranty; Warranty Claim Process; Manufacturer’s Limited Warranty Policy
22 This ZPG-7002B Electric Pellet Smoker BBQ has been certified to the following standards: Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility 2014/30/EU, EN 60335-1:2012+A11:2014, EN 60335-2-9:2003/A13:2010/AC:2012, EN 55014-1:2017, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013 ...
