Yazoo/Kees CS9 - Manual - manualsarea.com

Page 3 - INDEX

3 WARNING: Engine exhaust, some of its constituents, and certain vehicle components con- tain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. INDEX Operators Guide Features and Controls ....................................................

Page 5 - SAFETY RULES

5 SAFETY RULES Safety Procedures 1 - Training: • Read the Operator’s manual. If the operator(s) or mechanic(s) can not read English it is theowner’s responsibility to explain this material tothem. • Become familiar with the safe operation of the equipment, operator’s controls, and safetysigns. • All...

Page 7 - ASSEMBLY; Unpacking Instructions; Assembly Instructions; Collection System

7 ASSEMBLY Unpacking Instructions Assembly Instructions Collection System Tools Required: RatchetTorque Wrench1/2" Wrench1/2" Socket9/16" Wrench9/16" Socket5/8" Socket 1. Cut plastic tie securing the hitch to the crate top. 2. Remove the top of the crate. 3. Remove the plastic ba...

Page 13 - OPERATION; Operating the Collection System

13 OPERATION Operating the Collection System 1. NEVER USE THE COLLECTION SYSTEMWITHOUT THE B L O W E R A S S E M B LYAND HOSES SECURELY ATTACHED. 2. Make sure hoses are connected at bothends. Inspect hoses prior to each use. 3. Do not use the unit on slopes greater than10 degrees. 4. The mower must ...

Page 14 - SERVICE AND MAINTENANCE; Preventative Maintenance Schedule; WARNING; Cleaning and Washing

14 SERVICE AND MAINTENANCE Preventative Maintenance Schedule Item Before Every Every Every Each Use 5 Hours 25 Hours 50 Hours Inspect/Clean Poly Mesh X X Check/Tighten Nuts & Bolts X Check/Tighten Hoses X Turn Hose End to End X Rotate Hose X Clean Machine X Inspect Bags X WARNING The collection ...

Page 15 - Caring For Hoses

15 SERVICE AND MAINTENANCE Caring For Hoses 1. Inspect hoses before each use. If hoses have excessive wear, tears, or punctures, replaceimmediately. 2. To prolong the life of the hose, periodically ro- tate hose and turn hose end to end. Refer toPreventative Maintenance Schedule in thismanual. 3. Av...

Page 16 - Troubleshooting Guide; DANGER

16 SERVICE AND MAINTENANCE PROBLEM POSSIBLE CAUSE CORRECTION Loss of Vacuum. 1. Blower, hose or hood inlet clogged. 1. Remove hose and clean inlet. 2. Bags full. 2. Inspect and empty. 3. Fan blades bent or broken. 3. Replace/repair impeller. 4. Poly mesh plugged. 4. Clean poly mesh. Unusual vibratio...

Page 17 - SPINDLE DRIVE ASSEMBLY

17 NOTE: Your Front Weight Bar may look different from those shown in this diagram. SPINDLE DRIVE ASSEMBLY

Page 20 - HITCH ASSEMBLY

20 HITCH ASSEMBLY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 17 18 19 20 16 15 11 15 11 15 11

Page 22 - BLOWER ASSEMBLY

22 BLOWER ASSEMBLY LOCKING COLLAR THIS SIDE UP THIS SIDE DOWN HUB DOWN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 6 36 36 37 6 4 27 27 28 27 35 27 26 27 35 25 25 29 45 44 46

Page 24 - WEIGHT KIT

24 WEIGHT KIT ITEM PART NO. QTY DESCRIPTION 1 ......... 20255 .............. 1 .......... WEIGHT BAR, FRONT2 ......... 111313 ............. 1 .......... HOLD DOWN, WEIGHT BAR3 ......... 102049 ............ 2 .......... CLEVIS PIN4 ......... 108096 ............ 2 .......... SPRING RETAINER5 ............

Page 25 - MODEL CS9

25 WEIGHT KIT MODEL CS9 ITEM PART NO. QTY DESCRIPTION 1 ......... 111313 ............. 1 .......... HOLD DOWN, WEIGHT BAR2 ......... 102049 ............ 2 .......... CLEVIS PIN3 ......... 108096 ............ 2 .......... SPRING RETAINER4 ......... 111336 ............. 1 .......... WEIGHT BAR5 .........

Page 26 - MOUNTING KIT

26 MOUNTING KIT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 9 12 14 REF. MODEL CS13

Page 30 - BAG ASSEMBLY

30 BAG ASSEMBLY ITEM PART NO. QTY DESCRIPTION 1 ......... 110063 ............. 1 .......... HANGER, BAG2 ......... 111166 ............. 1 .......... TUBE, BAG FRAME3 ......... 111168 ............. 1 .......... BAG, LARGE, MODEL CS13 ........... 111300 ............. 1 .......... BAG, SMALL, MODEL CS9...

Page 31 - DRIVE KIT ASSEMBLY

31 DRIVE KIT ASSEMBLY 111295 - 48 INCH DECK ITEM PART NO. QTY DESCRIPTION 1 ......... 111254 ............. 1 .......... SHIELD W/DECALS, 48”2 ......... 105743 ............ 1 .......... DECAL, NO STEP3 ......... 105744 ............ 1 .......... DECAL, DANGER BELT DRIVES4 ......... 108951 ...............

Yazoo/Kees CS9 - Manual

Table of Contents:

Summary

Other Yazoo/Kees Models