Yamaha RN800ASL - User Manual

APPENDIX  132 Product care .. .......................................................................................  132 Taking care of this product .. .....................................................................................................................................................

BEFORE USE Please read first About this product and manual Thank you very much for purchasing this Yamaha product. This product is a network-compatible Receiver (2-channel stereo amplifier) which lets you play music content from the radio or a network in your home as wellas analog and digital audio ...

Terminology and technical explanations Following are explanations of terminology used in this guide. USB DAC The USB DAC converts digital audio signals, sent via a USB cable connected to a computer, into an analogaudio signal, which allows it to be played. This makes it possible for computer applica...

Input sources playable with this product Compatible input sources As illustrated below, this product supports playing a variety of input sources. PHONES YPAO MIC SPEAKERS INPUT BASS TREBLE BALANCE LOUDNESS VOLUME FLAT -30dB PURE DIRECT PRESET RETURN CONNECT PUSH - ENTER SELECT L R Built-in Radio Inp...

Compatibility with MusicCast This product is compatible with MusicCast. This makes it possible to share music with MusicCast-compatibledevices located in multiple rooms. Its dedicated app, “MusicCast Controller”, is easy to use and allows usersto enjoy music from smartphones, media servers (PC/NAS),...

Accessories Checking the accessories This product comes with the following accessories. Check and make sure that you have all of the includedaccessories. £ Power cord £ YPAO microphone £ DAB/FM antenna (Models for U.K., Europe, Russia and Australia) £ AM antenna (Models for U.S.A., Canada, China, Ko...

NAMES OF PARTS AND THEIR FUNCTIONS Unit Front panel The following are the names of parts on the front of the unit and an explanation of their functions. PHONES YPAO MIC SPEAKERS INPUT BASS TREBLE BALANCE LOUDNESS VOLUME FLAT -30dB PURE DIRECT PRESET RETURN CONNECT PUSH - ENTER SELECT L R l q m p r s...

Front display The following is an explanation of what is shown on the front display. n Basic indication This indication is shown during playback. What is shown differs depending on the current input source. Thefollowing is an example of the indication during playback of a media server. a b c a Play ...

c Information area The following information is shown depending on the selected input. When selecting CD, PHONO, LINE1, LINE2, OPTICAL1, OPTICAL2, COAXIAL1, COAXIAL2 or amusic streaming service The input name is displayed. When selecting USB DAC The audio format and sampling frequency of the playbac...

c Content information area Information such as file names and station names are shown. NOTE Some text characters may not be available, and “_” is displayed. n Warming up indication This indication is shown immediately after this product is turned ON. Icons are shown to indicate thetemperature condit...

Rear panel The following are the names of parts on the rear of the unit and an explanation of their functions. ANALOG IN COAXIAL OPTICAL USB SERVICE AC IN NETWORK DIGITAL IN ANTENNA SPEAKERS CD LINE L R L R 12V 0.1A TRIGGER OUT SUBWOOFER OUT FM AM 75 PHONO L R PRE OUT L L R GND 1 2 R A B 2 1 1 2 a g...

Remote control Remote control The following are the names of the parts of the remote control and explanations of their functions. VOLUME PHONO SLEEP LINE 1 LINE 2 CD COAX 1 COAX 2 USB DAC OPT 1 OPT 2 BLUETOOTH DISPLAY HOME RETURN SETUP OPTION NOW PLAYING MUTE TUNER NET PRESET REPEAT SHUFFLE 1 2 ENTE...

PREPARATION Preparing the remote control How to insert batteries, and its operating range Put the included batteries into the remote control facing the correct way (+/-). The operating range of the remote control is as illustrated. Point the remote control at the remote control signal (infrared) rec...

Connecting external devices Connecting audio devices This explains connecting audio devices, such as a CD player, to the product. Use the type of cable appropriate for the jacks of the device to be connected, such as an RCA cable, opticalfiber cable, or coaxial cable, which are commercially availabl...

Connecting to your computer (USB DAC function) This product is equipped with a USB DAC function. If you connect the USB port of this product to a computer,you can enjoy the high quality sound of music files on the computer, thanks to the analog conversion processused by the DAC device of this produc...

n Connect your computer Connect a USB cable (commercially available) to this product and your computer. The USB port of thisproduct is compatible USB Type B connectors. COAXIAL OPTICAL USB NETWORK DIGITAL IN ANTENNA SPEAKERS 12V 0.1A TRIGGER OUT SUBWOOFER OUT FM AM 75 PRE OUT L R A B 2 1 2 USB Compu...

Connecting speakers Connecting speakers Use speaker cable (commercially available) to connect speakers to the product. NOTICE ( Use the speakers with an impedance of at least 4-ohm. ( When connecting 2 sets of speakers (SPEAKERS A and SPEAKERS B), use the speakers with an impedance of at least 8-ohm...

2 Turn the knob of the speaker jack to the left to loosen it, then insert the core of thespeaker cable into the hole in the jack. 3 Turn the knob back to the right to tighten it. NOTICE ( When preparing the speaker cable, do so far away from the product. Pieces of the core wires of the speaker cable...

Making bi-wiring connections Bi-wiring allows output to the speaker woofers (low frequency) and the tweeter/mid-range (mid to high-frequency) to be split and driven separately. Speakers compatible with bi-wiring are required for theseconnections. 1 Remove the short bar or bridge attached to the jack...

Connecting a subwoofer To use a subwoofer, connect it to the product with a monaural pin cable (RCA) (commercially available). Subwoofer (with built-in amplifier) ANALOG IN COAXIAL OPTICAL USB SERVICE NETWORK DIGITAL IN ANTENNA SPEAKERS CD LINE L R L R 12V 0.1A TRIGGER OUT SUBWOOFER OUT FM AM 75 PHO...

Trigger connection Connecting a trigger-connection compatible Yamaha device The trigger function allows external devices to be controlled linked with the operation (power ON/OFF) ofthis product. If you are using a Yamaha subwoofer that supports system connections, or a device with aTrigger IN jack, ...

Connecting radio antennas Connecting an FM antenna Model For U.S.A., Canada, China, Korea, Asia, Taiwan, Central and South America Connect the included FM antenna to the product. After connecting the FM antenna, secure it to a wall. ANALOG IN COAXIAL OPTICAL USB SERVICE NETWORK DIGITAL IN ANTENNA SP...

Connecting an AM antenna Model For U.S.A., Canada, China, Korea, Asia, Taiwan, Central and South America Connect the included AM antenna to the product. Put the AM antenna in a flat location after connecting it. Rear panel AM antenna COAXIAL OPTICAL USB SERVICE NETWORK DIGITAL IN ANTENNA SPEAKERS 12...

Connecting a DAB/FM antenna Model For U.K., Europe, Russia and Australia Connect the included DAB/FM antenna to the product. Fix the antenna ends to a wall. ANALOG IN COAXIAL OPTICAL USB SERVICE NETWORK DIGITAL IN SPEAKERS CD LINE L R L R L GND 1 2 R A B 2 1 1 2 ANTENNA DAB/FM 75 Rear panel DAB/FM a...

Preparing a network connection To make a network connection This product supports both wired and wireless connections. Select the connection method according to your network environment. Connecting to a network allows you to play Internet radio stations and music files stored on media serverssuch as...

Connecting a network cable (wired connection) Use a network cable (CAT-5 or higher straight cable) (commercially available) to connect the product to therouter. If the router is compatible with DHCP servers, network settings do not have to be configured for this product. COAXIAL USB SERVICE AC IN NE...

Preparing the wireless antenna (wireless connection) To use a wireless or Bluetooth connection, flip up the wireless antenna. USB SERVICE NETWORK SPEAKERS SUBWOOFER OUT L R A B NOTICE ( Do not exert excessive force on the wireless antenna. Doing so may damage it. Related links ( “Registering with th...

Turning the product ON Connecting the power cord After making all the connections, connect the included power cord. AC IN Rear panel Connect to a power outlet NOTE Be sure to unplug this product from the power outlet when it will not be used for a long time. This product consumes a small amountof el...

Turning the power ON Turn the product ON. 1 Press the z (Power) Switch on the front panel. The power comes ON and the Power Indicator lights up. PHONES YPAO MIC SPEAKERS INPUT BASS Power Indicator Power Switch 2 When the following message is shown on the front display, press RETURN on thefront panel...

“Wireless WAC” Display ( The WAC (Wireless Accessory Configuration) function is for applying the wireless settings of an iOS device to another device andwirelessly connecting to the network. The steps for connecting to a network using MusicCast Controller are explained in thechapter “PREPARATION”. T...

Configuring MusicCast settings (connecting to anetwork) Registering with the MusicCast network Register the product to the MusicCast network. You can configure network connection settings for theproduct at the same time. The dedicated app “MusicCast Controller” for mobile devices is required formaki...

Automatic adjustment of speaker settings (YPAO) Running YPAO To run YPAO, the included YPAO microphone must be used. YPAO is a function that adjusts acoustic characteristics such as volume balance by detecting speakerconnections and the distance between your listening position and the speakers. This...

4 Put the included YPAO microphone in the listening position (ear height). Secure the YPAO microphone in place so it does not move. If a camera tripod is used for themicrophone, its screws can be used to secure the microphone. 5 Plug the YPAO microphone into the YPAO MIC jack on the front panel. YPA...

6 Press the ENTER key to start YPAO making the automatic adjustments of speakersettings. Adjustments start automatically after about 10 seconds. It takes about one minute. VOLUME PHONO SLEEP LINE 1 LINE 2 CD COAX 1 COAX 2 USB DAC OPT 1 OPT 2 BLUETOOTH DISPLAY HOME RETURN SETUP OPTION NOW PLAYING MUT...

Error and warning messages When error or warning messages are displayed, resolve the cause based on the following table and measureagain. [Search tag]#Q01 YPAO Error and Warning n Error Messages Error Messages Solution E-1:Noisy Measure again after making the room quiet. E-2:No Signal Plug the YPAO ...

Using the app to check YPAO measurements and changesettings You can use the dedicated app “MusicCast Controller” to check the results of YPAO measurements andchange the settings. Use a mobile device with “MusicCast Controller” installed on it to perform these steps.The screens shown in the following...

PLAYBACK Basic operations Selecting the output speakers Press the SPEAKERS A key and/or SPEAKERS B key to select the speakers to output to. VOLUME PHONO SLEEP LINE 1 LINE 2 CD COAX 1 COAX 2 USB DAC OPT 1 OPT 2 BLUETOOTH DISPLAY HOME RETURN SETUP OPTION NOW PLAYING MUTE TUNER NET PRESET REPEAT SHUFFL...

Selecting an input source To play music, select the desired input source. 1 Turn ON an external device. 2 Press an input source selection key to select an input source. Selects the input source from the following. ( PHONO key: audio from turntable (record player) input via the PHONO jacks. ( LINE 1/...

Adjusting the volume Press the VOLUME +/− keys to adjust the volume. VOLUME PHONO SLEEP LINE 1 LINE 2 CD COAX 1 COAX 2 USB DAC OPT 1 OPT 2 BLUETOOTH DISPLAY HOME RETURN SETUP OPTION NOW PLAYING MUTE TUNER NET PRESET REPEAT SHUFFLE 1 2 ENTER 3 MEMORY A B SPEAKERS ENTER VOLUME HOME RETURN SETUP OPTION...

Switching the front display The information shown on the front display can be changed depending on the current input source. Repeatedly press the DISPLAY key of the remote control to select the desired display item. The selected information is displayed after 3 seconds. The following display items a...

Adjusting the sound to your preference Enjoying Pure Direct playback (PURE DIRECT) Pure Direct stops various processes and circuitry except for the basic ones for playback, letting you enjoyhigher quality sound with reduced noise. Press PURE DIRECT to turn it ON, and the indicator lights up. NOTE ( ...

Adjusting bass and treble (BASS/TREBLE) You can adjust the level of high-frequency range (Treble) and low-frequency range (Bass) individually. BASS TREBLE n Adjusting the bass When the bass feels too weak, turn BASS to the right to increase it. When it feels too strong, turn BASS to theleft to reduc...

Making it easier to hear bass and treble at low volumes(LOUDNESS) It lowers the volume of the midrange and allows the listener to enjoy natural sound even at low volumes bycompensating for the human auditory characteristic that makes it difficult to hear bass and treble at lowvolumes. CAUTION ( If y...

Listening to the radio Preparing to listen to the radio Setting the frequency steps Model For Asia, Taiwan, Central and South America Set the radio tuning frequency steps of this product depending on your country or region. At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz...

Preparing the DAB tuning Model For U.K., Europe, Russia and Australia Before listening to DAB (Digital Audio Broadcasting) radio, perform an initial scan to register the DAB radiostations automatically. 1 Switch the input to “TUNER”. 2 Press the TUNER key to select the DAB band. After 3 seconds, the...

Selecting a radio station You can use the this product’s built-in tuner to listen to the radio. 1 Switch the input to “TUNER”. The currently selected frequency is shown on the front display. 2 Press the TUNER key to switch to the next reception band. ( FM/AM (Models for U.S.A., Canada, China, Korea,...

Displaying the Radio Data System information Model For U.K., Europe and Russia Radio Data System is a data transmission system used by FM stations. This product can receive various typesof data, such as “Program Service”, “Program Type”, “Radio Text” and “Clock Time”, when it is tuned in to aRadio D...

Displaying the DAB information Model For U.K., Europe, Russia and Australia This product can receive various types of DAB information when it is tuned into a DAB radio station. 1 Tune in to the desired DAB radio station. 2 Press the DISPLAY key on the remote control to select between the various dis...

Registering radio stations manually You can select a radio station and register it manually to a preset number. 1 Select a radio station. 2 Press the MEMORY key. 3 Press the PRESET key and select the preset number to register. 4 Press the MEMORY key. This completes the registration. NOTE ( A maximum...

Removing the registration of a radio station This explains how to remove the registration of a preset radio station. 1 Switch the input to “TUNER”. 2 Press the OPTION key. 3 Select “Clear Preset” with the cursor keys ( q / w ) and then press the ENTER key. 4 Press the PRESET key, select the preset n...

Playing via a Bluetooth® connection Playing the audio of a Bluetooth device on this product (audioreception) This product can play music files and the like saved on a Bluetooth device (such as a smartphone). CAUTION ( If you adjust the volume on the Bluetooth device, it may get unexpectedly loud and...

Playing this product’s audio through Bluetooth speakers/headphones (audio transmission) You can output the audio playing on this product to Bluetooth speakers/headphones. Only connect to Bluetooth speakers/headphones that have volume adjustment. This product cannot adjusttheir volume. Bluetooth spea...

Listening to music via AirPlay Playing music via AirPlay You can play music and other content on this product via AirPlay. Tap (or click) the AirPlay icon on youriPhone or iTunes/Music and then select this product as the output destination. CAUTION ( The volume may become louder than expected when a...

Listening to internet radio Selecting an internet radio station When this product is connected to a network, you can select and play Internet radio stations. 1 Press the NET key on the remote control repeatedly to switch the input to “NetRadio”. The browse indication is shown on the front display. 2...

Listening to streaming services Listening to streaming services When this product is connected to a network, you can play content distributed by the various streamingservices. For information on supported streaming services, go to the product information pages of the Yamahawebsite or refer to the Mu...

Playing audio from your computer (USB DAC) Playing music that is on your computer When this product is connected to a computer via USB cable, it can play music that is on the computer. NOTE It may be necessary to install drivers when connecting this product to a computer. 1 Switch the input to “USB ...

Option menu (settings for each input source) Basic operation of the Option menu You can set playback-related functions to suit the source that is currently playing. The basic operatingmethods of the Option menu are as follows. 1 Press the OPTION key. 2 Select a setting with the cursor keys and press...

List of Option menu The following settings are available in the Option menu. Item Page Volume Trim Input Trim 80 Signal info Format 81 Sampling 81 Auto Preset 66 Clear Preset 68 FM Mode 82 Init Scan 83 Tune AID 84 Volume Interlock 85 Auto playback 86 PLL 87 NOTE The settings available on the Option ...

Correcting volume difference between input sources You can correct volume difference between input sources. If it bothers you when the volume becomeslouder/quieter when you change the input source, use this setting to fine tune them. Option menu “Volume Trim” > “Input Trim” Setting value -10.0 dB...

Displaying audio signal information n Displaying format information You can display format information for the audio signal that is playing. Option menu “Signal info” > “Format” Related links “Basic operation of the Option menu” (p.78) n Displaying the sampling frequency You can display the sampl...

Performing an initial scan for DAB radio reception Model For U.K., Europe, Russia and Australia Performs an initial scan for searching DAB radio stations. Option menu “Init Scan” 1 Select “TUNER” as the input source. 2 Press the TUNER key to select the DAB band. 3 Press the OPTION key. 4 Use the cur...

Checking reception strength of each DAB channel label Model For U.K., Europe, Russia and Australia You can check reception strength of each DAB channel label. Option menu “Tune AID” 1 Select “TUNER” as the input source. 2 Press the TUNER key to select the DAB band. 3 Press the OPTION key. 4 Use the ...

Setting auto playback Sets whether to auto play media server content. Option menu “Auto playback” Setting value Off Disables auto playback. On When the power is turned ON or the input is switched, the content that was last playedstarts playing automatically. NOTE ( The auto play settings are only av...

USEFUL FUNCTIONS Preset functions Registering your favorite content to presets Registering your favorite content (media server songs, Internet radio stations, etc.) to presets or the 1/2/3keys makes it easy to recall it later. n Preset registration “TUNER”, “Server”, “Net Radio” and some streaming s...

n Registering a favorite (1/2/3 keys) “TUNER”, “Server”, “Net Radio” and some streaming services can be registered. 1 Select the radio stations you want to register, or play songs or Internet radiostations. 2 Press a numeric key (either 1/2/3) for 3 seconds or longer. If a favorite is already regist...

Recalling content registered to a preset Select the content you want to listen to from the content (songs from a media server or Internet radio)registered to presets and/or the 1/2/3 keys. n Recalling a preset 1 Press the TUNER key or the NET key. VOLUME PHONO SLEEP LINE 1 LINE 2 CD COAX 1 COAX 2 US...

Sleep timer function Configuring the time for the sleep timer Once the specified time elapses, the product goes into Standby. 1 Press the SLEEP key repeatedly to set the desired time for the sleep timer. You can choose OFF, 120, 90, 60 or 30 minutes. SLEEP VOLUME PHONO SLEEP LINE 1 LINE 2 CD COAX 1 ...

SETTINGS Menus Menu structure This product has the following menus, depending on the use. Setup menu: For detailed configuration of the functions of the product. Make settings with the remote control whilelooking at the front display. Advanced Setup menu: For configuring the product’s system setting...

Setup menu (changing function settings) Basic operation of the Setup menu For detailed configuration of the functions of the product. The basic operating methods of the Setup menuare as follows. 1 Press the SETUP key. 2 Select a settings item with the cursor keys and press the ENTER key. To go back ...

List of Setup menu items Items in the Setup menu are as follows. Item Page Network Connection 96 Network Info IP Address DMC Control Network Standby Network Name Network Update MCLink Pow Intlck Bluetooth Bluetooth 101 Bluetooth Standby YPAO Speaker A 102 Speaker B Speaker A+B Speaker Off Volume Max...

Configuring a network n Setting the method of connecting (wired/wireless) to a network This sets the method of connecting this product to a network. Setup menu “Network” > “Connection” Setting value Wired Connects via a network cable. Wireless (Wi-Fi) Connects via Wi-Fi. Related links ( “To make ...

n Configuring operations from a digital media controller This configures whether this product can be controlled from a digital media controller (DMC). When enabled,playback of this product can be controlled from a DMC on the same network as the product. Setup menu “Network” > “DMC Control” Settin...

Setup menu “Network” > “Network Name” 1 Press the ENTER key. 2 Use the cursor keys ( e / r ) to move the cursor position and the cursor keys ( q / w ) to edit the name. Press the MEMORY key to delete the character to the left of the cursor. Press the PRESET key toinsert a new character one charac...

Configuring Bluetooth n Configuring to use Bluetooth This sets whether or not to use the Bluetooth function. Setup menu “Bluetooth” > “Bluetooth” Setting value Off Disables Bluetooth functions. On Enables Bluetooth functions. Related links ( “Playing via a Bluetooth® connection” (p.69) ( “Basic o...

Configuring YPAO n Reflecting YPAO measurements in speaker settings Sets whether to reflect YPAO measurements in speaker settings. “---” is displayed if YPAO has not been run yet, so this setting is not available. Setup menu “YPAO” > (each speaker) > “Setting” Setting value Off Disables reflec...

Configuring the volume n Setting the maximum volume This sets the maximum volume that can be set via the VOLUME keys of the remote control, etc. Setup menu “Volume” > “Max Volume” Setting value -50 dB to 0 dB Related links “Basic operation of the Setup menu” (p.94) n Setting the power-ON volume T...

Configuring auto power standby This setting is for making the power of this product go into Standby automatically. Setup menu “Auto Power Stdby” Setting value Off Does not go into Standby automatically. On Goes into Standby when any of the following conditions is met. ( When the product has not been...

Setting the product to ECO mode Sets the product to the ECO mode (power-saving function). When the setting has been changed, press the ENTER key to restart the product. The new setting is appliedafter restarting. Setup menu “ECO Mode” Setting value Off Disables the ECO mode. On Enables the ECO mode....

Configuring the front display n Setting the brightness of the front display For adjusting the brightness of the front display. The bigger the value, the brighter the display. Setup menu “Display” > “Brightness” Setting value -3 to 3 NOTE The brightness of the display is dimmed (equivalent to the ...

Advanced Setup menu (changing system settings) Basic operation of the Advanced Setup menu For changing system settings for the product. Operate as follows from the front panel. 1 If the power of the product is ON, press the z (Power) Switch to turn it OFF. 2 Press the z (Power) Switch while holding ...

List of Advanced Setup menu items Items in the Advanced Setup menu are as follows. Item Page Language 109 Remote ID 110 Frequency Step 111 Initialization 112 Sp Impedance 113 108 SETTINGS > Advanced Setup menu (changing system settings)

Configuring the menu language This sets the language for menus, such as the Setup menu. Advanced Setup menu “Language” Setting value English English 日本語 Japanese Français French Deutsch German Español Spanish Русский Russian Italiano Italian Related links “Basic operation of the Advanced Setup menu”...

Configuring the Remote ID This changes the Remote ID of the main unit of this product. Normally you should set it to “ID1”. Advanced Setup menu “Remote ID” Options ID1 Sets the Remote ID to ID1. Auto Assigns the Remote ID automatically. Use this setting when operating the product usingthe remote con...

Changing the FM/AM tuning frequency setting Model For Asia, Taiwan, Central and South America Sets the FM/AM tuning frequency setting of this product depending on your country or region. Advanced Setup menu “Frequency Step” Setting value FM100/AM10 Adjusts the FM frequency by 100-kHz steps and AM by...

Initializing settings Initializes (resets) the various settings of the product. Advanced Setup menu “Initialization” Options All Initializes all settings. Network Initializes network-related settings. Cancel Cancels initialization. Related links ( “Basic operation of the Advanced Setup menu” (p.107)...

Switching speaker impedance Changes this product setting to match the impedance of the connected speakers. Advanced Setup menu “Sp Impedance” Setting value 4Ω MIN For speakers with an impedance of 4-ohm or more but less than 8-ohm. 8Ω MIN For speakers with an impedance of 8-ohm. Related links “Basic...

UPDATING Checking the version of firmware Checking the version of firmware The version of this product’s firmware can be checked from the Setup menu. Do so as follows. 1 Press the SETUP key. 2 Select “Network” with the cursor keys ( q / w ) and then press the ENTER key. 3 Then select “Network Update...

Updating the firmware via your network If this product is connected to the Internet and it is ready for a new firmware update, the following messageappears when you turn this product ON. Update the firmware over the network from this screen. NOTICE ( Do not operate the product or unplug its power co...

Problems with power, system, and/or remote control Power fails to turn ON ( The protective circuit has been activated 3 times in a row. If the Power Indicator on the front panel flashes when you try to turn the power ON, it fails to come on inorder to protect the product. Please contact an authorize...

This product cannot be operated with the remote control ( The z (Power) Switch on the front panel is OFF. Turn the z (Power) Switch on the front panel ON. ( It is outside the operating range. Try using it within the operating range. For more details, refer to the following. ( “How to insert batterie...

Problems with the audio No sound ( A different input is selected. Use the input source selection key to select the correct input. For more details, refer to the following. ( “Selecting an input source” (p.53) ( The product is receiving an input signal that it cannot play. This product cannot play so...

Problems with FM radio Radio reception is poor or has noise ( It is receiving multipath (multiple reflections) or other interference. Change the height, orientation, and/or location of the FM antenna. ( The radio station is being received from a distant region. Switch to monoaural reception via “FM ...

Problems with AM radio AM radio reception is poor or has noise ( It is picking up noise from sources like fluorescent lights, motors, etc. It is difficult to completely eliminate noise from the environment. However, using a commercially-available outdoor antenna may help reduce the noise. Automatic ...

Problems with DAB radio No DAB radio reception ( An initial scan has not been performed. Perform an initial scan to receive DAB radio. For details, see the following: ( “Preparing the DAB tuning” (p.61) No DAB radio reception even after performing an initial scan ( Reception strength of DAB radio is...

Problems with USB DAC This product is not recognized by the PC ( The product is connected to a PC that is running an OS that is not guaranteed to work with it. Connect the product to a PC that is running an OS that is guaranteed to work with it. ( The USB cable is not connected correctly. Plug the U...

Problems with network Network functions cannot be used ( Network information (IP address) was not acquired properly. Enable the DHCP server function of the router. Set “DHCP” to “On” from the Setup menu of this product.For more details, refer to the following. ( “Configuring a network” (p.96) If you...

Media server (PC/NAS) files will not display (or play) ( This product or the media server are using unsupported file format(s). Use file formats that are supported by both this product and the media server. Refer to the following forthe music file formats supported by this product. ( “Supported file...

This product is not detected by the dedicated app on the mobile device ( This product is not connected to the same network as the mobile device. Check the network settings and/or the router settings and connect to the same network. ( You are using a router that supports multi SSID. The network isola...

Problems with Bluetooth Cannot connect with a Bluetooth device ( The wireless antenna of this product is not up. Stand the wireless antenna upright. ( The Bluetooth function of this product is disabled. Enable the Bluetooth function with “Bluetooth” on the Setup menu. For more details, refer to thef...

Errors shown on the front display When an error is shown on the front display, check it in the following table. Message Contents Solution Check speakerwires The speaker cable(s) areshorted. Firmly twist the core wires of each of the speaker cables and thenreconnect them to this product and the speak...

APPENDIX Product care Taking care of this product Check the following before cleaning the product. ( Do not use chemicals such as benzene, thinner, or rubbing alcohol on the product. To avoid scratching thesurface, wipe it dry with a soft cloth. 132 APPENDIX > Product care

Making wireless network connections Selecting the wireless method of connecting to the network Select the connection method suiting your network environment. 1 Press the SETUP key. 2 Select “Network” with the cursor keys ( q / w ) and then press the ENTER key. 3 Then select “Connection” and “Wireles...

Using the WPS button to make a wireless connection Pressing the WPS button on your wireless LAN router is a simple way to configure a wireless connection. Setup menu “Network” > “Connection” > “Wireless (Wi-Fi)” 1 Select “WPS” with the cursor keys ( q / w ). 2 Follow instructions on the front ...

Making a wireless connection with your iPhone (WAC) Apply the network settings of your iPhone (iOS device) to this product to set up a wireless connection. Before starting setup, check and make sure your iPhone is connected to the wireless LAN router (accesspoint). Setup menu “Network” > “Connect...

Making a wireless connection manually Enter the required information and set up a wireless connection. You will have to configure the SSID(network name), encryption method and security key manually. Setup menu “Network” > “Connection” > “Wireless (Wi-Fi)” 1 Select “Manual Setting” with the cur...

Supported devices and formats Supported Bluetooth devices Check the following for the Bluetooth devices that can connect to this product. ( Bluetooth devices that support A2DP and AVRCP profiles can be connected. ( Connection to all Bluetooth devices is not guaranteed. 137 APPENDIX > Supported de...

Supported file formats on this product (network) Of all the audio formats that may be received over the network, the following file formats can be played onthis product. File Samplingfrequency (kHz) No. ofquantization bits(bit) Bit rate (kbps) No. of channels Gapless PlaybackSupport WAV* 32/44.1/48/...

Playable formats using USB DAC The following are the signal formats and sampling frequencies that can be played the USB DAC function. n Compatible formats and sampling frequencies ( PCM 2-ch: 44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz/192 kHz/352.8 kHz/384 kHz (16-bit/24-bit/32-bit) ( DSD 2-ch: 2.8 M...

Trademarks Trademarks The trademarks used in this manual are as follows. This Receiver is compatible with AirPlay 2. iOS 11.4 or later is required. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technologyidentified in the badge and has been...

Specifications Specifications The specifications of this unit are as follows. Input jacks Analog Audio ( Audio x 4 (including PHONO) Digital Audio ( Optical x 2 (PCM only) (Supported frequencies: 32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz/192 kHz) ( Coaxial x 2 (PCM only) (Supported frequencie...

Audio Section Rated Output Power (2-channel driven) (20 Hz to 20 kHz, 0.07% THD) ( 8 Ω 100 W + 100 W ( 4 Ω 100 W + 100 W Dynamic power (IHF) ( 8 Ω 140 W + 140 W ( 6 Ω 170 W + 170 W ( 4 Ω 220 W + 220 W ( 2 Ω 290 W + 290 W IEC Output Power (1kHz, 0.07% THD, 8 Ω) ( [Models for U.K. and Europe] 115 W + ...

Total Harmonic Distortion Plus Noise (2-channel driven) (Pure Direct ON) ( PHONO to PRE OUT (1.0 Vrms) 0.04% ( CD/LINE1/LINE2 to SP OUT (50 W/8 Ω) 0.019% Signal to Noise Ratio (IHF-A Network) (Pure Direct ON) ( PHONO (MM) 82 dB ( CD/LINE1/LINE2 100 dB Residual Noise (IHF-A Network) (Pure Direct ON) ...

AM Section (Models for U.S.A., Canada, China, Korea, Asia, Taiwan and for Central andSouth America) Tuning Range ( [Models for U.S.A. and Canada] 530 kHz to 1710 kHz ( [Models for Asia, Taiwan and for Central and South America] 530/531 kHz to 1710/1611 kHz ( [Models for China and Korea] 531 kHz to 1...

Default values List of default values of the Option menu Check the following default values of the Option menu of this product. Volume Trim ( Input Trim 0.0 dB Signal info ( Format - ( Sampling - Auto Preset - Clear Preset - FM Mode Stereo Volume Interlock Limited Auto playback On PLL ( For “OPTICAL...

List of default values of the Setup menu Check the following default values of the Setup menu of this product. Network ( Connection Wired ( Network Info - ( IP Address ( DHCP On ( DMC Control Enable ( Network Standby Auto ( Network Name - ( Network Update - ( MCLink Pow Intlck Off Bluetooth ( Blueto...

List of default values of the Advanced Setup menu Check the following default values of the Advanced Setup menu of this product. Language English Remote ID ID1 Frequency Step (Models for Asia, Taiwan and for Central and South America) FM50/AM9 Initialization - Sp Impedance 8Ω MIN 149 APPENDIX > D...