Yamaha RX-A4ABL - User Manual

Configuring various functions (Setup menu) .. ............................................ 191 Basic operation of the Setup menu .. ..................................................................................................................................... 191 Setup menu items .. .............

Specifications .. .....................................................................................  396 Specifications .. ....................................................................................................................................................................... 396 D...

BEFORE USING THE UNIT Read me first How to use this guide Thank you very much for purchasing a Yamaha product. ( This unit is a product for enjoying video and music at home. ( This guide explains preparations and operations for everyday users of the unit. ( To use the unit safely and correctly, be s...

Glossary For a glossary of terms used in this guide, refer to the site below. There are explanations of terms andtechnologies for this product and also for Yamaha AV products in general. https://manual.yamaha.com/av/cm/glossary/ 11 BEFORE USING THE UNIT > Read me first

Checking the accessories Checking the accessories Check that the following accessories are supplied with the product. £ AM antenna (Except for U.K., Europe, Russia and Australia models) £ FM antenna (Except for U.K., Europe, Russia and Australia models) * One of the above is supplied depending on th...

Using the remote control Insert the batteries in the remote control Insert the batteries the right way round. 14 BEFORE USING THE UNIT > Using the remote control

Operating range of the remote control The operating range of the remote control is shown in the following figure. Point the remote control at the remote control sensor on the unit. Within 6 m (20 ft) 30° 30° 15 BEFORE USING THE UNIT > Using the remote control

FEATURES What you can do with the unit Supporting various speaker system According to the number of speakers that you are using, you can enjoy your favorite acoustic spaces invarious styles. ( 7.1/5.1.2-channel system ( 5.1.2-channel system ( 7.1-channel system ( 5.1-channel system ( 3.1.2-channel s...

Automatically optimizing the speaker settings YPAO function detects speaker connections, measures the distances from them to your listening positions(measuring positions) by using YPAO microphone measurement, and then automatically optimizes thespeaker settings, such as volume balance and acoustic p...

Enjoying sound field effects with much presence The unit is equipped with a variety of sound programs and surround decoders that allow you to enjoyplayback sources with your favorite sound mode (such as sound field effect or stereo playback). ( “Enjoying 3-dimentional sound fields” (p.112) ( “Enjoyi...

Wide variety of supported content via network When the unit is connected to a network, you can enjoy the various kinds of content via network on the unit. ( “Playback of music with AirPlay” (p.146) ( “Playback of music media servers (PCs/NAS)” (p.149) ( “Selecting an Internet radio station” (p.150) ...

Playing back content of various devices A number of HDMI jacks and various input/output jacks on the unit allow you to connect video devices (suchas BD/DVD players), audio devices (such as CD players), Bluetooth devices (such as smartphones), gameconsoles, USB flash drives, and other devices. You ca...

Useful functions The unit is equipped with the various useful functions. The SCENE function allows you to select the inputsource and settings registered to the corresponding scene, such as sound program and Compressed MusicEnhancer on/off, with just one touch. You can recall the registered content (...

Supporting wireless speakers The unit is equipped with the function connected with speakers wirelessly. You can enjoy audio played backon the unit using Bluetooth speakers/headphones. Also, using devices that support the MusicCast Surroundfunction, the surround speakers and subwoofer can be wireless...

Useful applications AV SETUP GUIDE AV SETUP GUIDE is an application that assists you with cable connections between AV Receiverand playback devices as well as AV Receiver setup. This app guides you through the varioussettings such as speaker connections, TV and playback device connections and select...

MusicCast CONTROLLER MusicCast CONTROLLER is an application that allows you to link a MusicCast compatible device toother MusicCast compatible devices in other rooms and play them back simultaneously. This applets you use your smartphone or other mobile device instead of the remote control to easily...

PART NAMES AND FUNCTIONS Unit body Part names and functions of the front panel The part names and functions of the front panel are as follows. PHONES 1 2 3 4 MENU(CONNECT) SELECT/ENTER RETURN SCENE USB YPAO 5V 1A ZONE SURROUND:AI PURE DIRECT b f c e d g a h k i j a z (power) Turns on/off (standby) t...

Front display Part names and functions of the front display The part names and functions of the front display are as follows. a g h f b d c e a Operation mode icon Indicates the current mode of the front display (the input select mode or the info select mode). b Input default name Displays the defau...

Selecting the input information displayed on the front display The front display in the info select mode displays additional information related to the input source on thefront display. Item Push SELECT/ENTER on the front panel to switch the front display to the info select mode. And rotateSELECT/EN...

Currently input source Displayed item music streaming services(with playbackinformation) AirPlay Song, Artist, Album, IP Address, Ethernet MAC Address, Wi-Fi MAC Address, DSP Program,Audio Decoder, Output Channel, HDMI Status, Zone Status, System Status music streaming services(without playbackinfor...

n System Status The following system information is displayed. An underscore is indicated when it is disabled. ( ECO: the eco mode is enabled. ( PARTY: the party mode is enabled. ( MASTER: the unit is the master device of the MusicCast network. 31 PART NAMES AND FUNCTIONS > Unit body

Part names and functions of the rear panel The part names and functions of the rear panel are as follows. (1 MOVIE) (5 STB) (6 GAME) FM AM 75 HDMI (4 NET RADIO) (8 SERVER) 1 2 2 1 2 3 4 5 6 7 eARC/ARC FRONT SURROUND SUR. BACK SUBWOOFER CENTER 1 2 PRE OUT ZONE OUT ZONE 2 SPEAKERS 12VMAX. TOTAL IN 0.1...

Remote control Part names and functions of the remote control The part names and functions of the supplied remote control are as follows. PRESET BAND BAND TUNING TUNING TUNING TUNING MODE MEMORY MEMORY RED GREEN YELLOW BLUE POP-UP /MENU HOME TOP MENU VOLUME BLUETOOTH NET USB TUNER I N P U T PROGRAM ...

PREPARATIONS Before starting Names and functions of speakers The names and functions of speakers connected to the unit are as follows. 4 1 2 9 9 E R 5 6 7 3 10° to 30° 10° to 30° 0.5 to 1 m (1.6 to 3.3 ft) 0.5 to 1 m (1.6 to 3.3 ft) 1.8 m (5.9 ft) 1.8 m (5.9 ft) 0.3 m (1 ft) or more Speaker type Abb...

Flow of preparations Flow of preparations (with surround speakers connected byspeaker cables) Basic flow of preparations for using the unit is as follows. 1 Place speakers. 2 Connect speakers. 3 Connect a TV. 4 Connect playback devices. 5 Connect the radio antennas. 6 Prepare for connecting to a net...

How to place speakers (speaker systems) Speaker systems recommended to the unit (basic setup) This speaker system brings out the full performance of the unit. You can enjoy a highly-natural 3-dimensional sound field with any content. We recommend this speakersystem for Dolby Atmos or DTS:X content. ...

FRONT SURROUND SUR. BACK SUBWOOFER CENTER 1 2 PRE OUT ZONE OUT ZONE 2 SPEAKERS FRONT CENTER SURROUND F.PRESENCE EXTRA SP. 1 ZONE 2/BI-AMP SURROUND BACK EXTRA SP. 2 ZONE 2 3 7 6 1 2 9 9 5 4 R E NOTE ( The surround back speakers and front presence speakers do not produce sounds simultaneously. The uni...

Other speaker systems (basic setup) 5.1.2-channel system To have a full effect of Dolby Atmos or DTS:X content, we recommend this speaker system. The frontpresence speakers produce a natural 3-dimensional surround field including overhead. [Search tag]#Q01 Speaker systems n For layout with front pre...

n For layout with front presence speakers in Overhead position 4 1 2 9 9 5 3 E R 10° to 30° 10° to 30° FRONT SURROUND SUR. BACK SUBWOOFER CENTER 1 2 PRE OUT ZONE OUT ZONE 2 SPEAKERS FRONT CENTER SURROUND F.PRESENCE EXTRA SP. 1 ZONE 2/BI-AMP SURROUND BACK EXTRA SP. 2 ZONE 2 3 1 2 9 9 5 4 R E 44 PREPA...

Speaker systems using the unit’s internal amplifier (advancedsetup) List of speaker systems using the unit’s internal amplifier In addition to the basic speaker systems, the unit also allows you to apply the following speakerconfigurations. To enjoy following systems, configure the necessary speaker...

Connecting speakers Speaker requirements Speakers and subwoofers to be connected to the unit must meet the following requirements: ( Use following speakers. ( the front speakers: with an impedance of at least 4-ohm ( other speakers: with an impedance of at least 6-ohm ( Use a subwoofer with built-in...

Cable requirements Use the following types of commercially-available cables to connect speakers to the unit: ( Speaker cables (for connecting the speakers) – + – + ( Audio pin cable (for connecting a subwoofer) Related links “Connecting the speaker” (p.67) 66 PREPARATIONS > Connecting speakers

How to connect speakers Connecting the speaker Connect a speaker cable between the negative (–) terminal of the unit and the negative (–) terminal of thespeaker, and between the positive (+) terminal of the unit and the positive (+) unit of the speaker. Remove the unit’s power cable from an AC wall ...

Connecting the subwoofer Use an audio pin cable to connect the subwoofer. Unplug the power cables of the unit and subwoofer from the AC wall outlets before connecting thesubwoofer. 2 1 SUBWOOFER CENTER PREOUT SUR. BACK SURROUND FRONT Audio pin cable Related links “HDMI connection with a TV” (p.70) 6...

Connecting a TV HDMI connection with a TV Connect a TV to the unit with an HDMI cable. When the TV audio is played back on the unit, use eARC/ARCfunction or use a digital optical cable to input TV audio to the unit. [Search tag]#Q02 Connect TV NOTE ( Use a 19-pin HDMI cable with the HDMI logo. We re...

n Connecting a digital optical cable If your TV does not support eARC/ARC, connect your TV to AUDIO 1 OPTICAL jack on the unit with a digitaloptical cable. (1 MOVIE) (5 STB) FM AM 75 1 2 2 1 eARC/ARC FRONT SURROUND SUR. BACK SUBWOOFER CENTER 1 2 PRE OUT ZONE OUT ZONE 2 SPEAKERS FRONT CENTER F.PRESEN...

HDMI connection with another TV or a projector The unit has multiple HDMI output jacks. If you connect another TV or a projector to the unit with an HDMIcable, you can switch the TV (or projector) to be used for watching videos with the remote control. (1 MOVIE) (5 STB) (6 GAME) 1 2 2 1 eARC/ARC FRO...

Connecting playback devices HDMI connection with a video device such as a BD/DVD player Connect a video device to the unit with an HDMI cable. (1 MOVIE) (5 STB) (6 GAME) HDMI 1 2 1 2 3 4 5 6 7 eARC/ARC SUR. BACK SUBWOOFER CENTER 1 2 PRE OUT SPEAKERS 12VMAX. TOTAL IN 0.1A CENTER SURROUND 1 OUT F.PRES...

Connection other than HDMI with a playback device AUDIO connection with an audio device such as a CD player Connect audio devices such as CD players to the unit. Depending on the audio output jacks available on your audio device, choose one of the followingconnections. Audio output jacks on audio de...

Connecting the radio antennas Connecting the FM antenna Model For U.S.A., Canada, Asia, Korea, China, Taiwan, Brazil, General, and Central and South America Connect the supplied FM antenna to the unit. Fix the end of the FM antenna to a wall. (1 MOVIE) (5 STB) (6 GAME) FM AM 75 HDMI 1 2 2 1 3 4 eARC...

Connecting the AM antenna Model For U.S.A., Canada, Asia, Korea, China, Taiwan, Brazil, General, and Central and South America Connect the supplied AM antenna to the unit. Place the AM antenna on a flat surface. (1 MOVIE) (5 STB) (6 GAME) FM AM 75 HDMI 1 2 2 1 3 4 eARC/ARC FRONT SURROUND SUR. BACK S...

Connecting the DAB/FM antenna Model For U.K., Europe, Russia and Australia Connect the supplied DAB/FM antenna to the unit. Fix the antenna ends to a wall. (1 MOVIE) (5 STB) (6 GAME) DAB/ FM 75 HDMI 1 2 2 1 3 4 eARC/ARC GND FRONT SURROUND SUR. BACK SUBWOOFER CENTER 1 2 PRE OUT ZONE OUT AUDIO 1 ( 7 T...

Preparing for connecting to a network Network connection of the unit The unit supports wired and wireless connections. Select a connection method according to your network environment. You can enjoy Internet radio or music files stored on media servers, such as PCs and Network AttachedStorage (NAS),...

Connecting a network cable (wired connection) Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straightcable). When using a router that supports DHCP, you do not need to configure any network settings for the unit. (6 GAME) HDMI (4 NET RADIO) (8 SERVER...

Preparing wireless antennas (wireless connection) Stand the wireless antennas upright for connecting to the wireless network or a Bluetooth device wirelessly. NOTICE ( Do not apply excessive force on the wireless antenna. Doing so may damage the antenna. Related links ( “Adding the unit to the Music...

Connecting other devices Connecting an external power amplifier When connecting an external power amplifier (pre-main amplifier) to enhance speaker output, connect theinput jacks of the power amplifier to the PRE OUT jacks of the unit. The same channel signals are output from the PRE OUT jacks as fr...

Connecting a device compatible with the trigger function The trigger function can control an external device in conjunction with operating the unit (such as poweringon/off and input selection). If you have a Yamaha subwoofer that supports a system connection or a devicewith a trigger input jack, you...

Operating the unit from another room (remote connection) You can operate the unit or external devices from another room (a zone) using the remote control suppliedwith each device if you connect an infrared signal receiver/emitter to the unit’s REMOTE IN/OUT jacks. (1 MOVIE) (5 STB) (6 GAME) HDMI 1 2...

Turning on the power of the unit Plugging in the power cable After all the connections are complete, plug in the power cable. (5 STB) (6 GAME) HDMI (4 NET RADIO) (8 SERVER) 2 2 3 4 5 6 7 PRE OUT SPEAKERS 12VMAX. TOTAL IN 0.1A SURROUND AC IN 1 OUT SURROUND BACK EXTRA SP. 2 ZONE 2 NETWORK REMOTE TRIGG...

Setting the power to on/standby (Main zone) Switch the power of Main zone between on and standby. NOTE Main zone is the room where the unit is installed. 1 Set the zone switch to “MAIN”. 2 Press z . Each time you press the key, you can switch the power of Main zone between on and standby. NOTE When ...

Selecting the menu language Selecting the menu language To set the desired menu language, switch the input of the TV to display video from the unit and press SETUP.And then, select “Language” in “System” in the “SETUP” menu. Related links ( “Setting the menu language” (p.278) ( “Basic operation of t...

Setting MusicCast What is MusicCast MusicCast is a wireless musical solution from Yamaha, allowing you to share music among all of your roomswith a variety of devices. You can enjoy music from your smartphone, PC, NAS drive, Internet radio stationand music streaming service anywhere in your house wi...

Using MusicCast CONTROLLER To use the network features on the MusicCast compatible device, you need the dedicated application“MusicCast CONTROLLER” for the operation. Search for the free application “MusicCast CONTROLLER” onthe App Store or Google Play and install it to your device. Related links “A...

Adding the unit to the MusicCast network Perform the following procedure to add the unit to the MusicCast network. You can also configure the unit’swireless network settings at once. 1 Launch the “MusicCast CONTROLLER” application on your mobile device and tap“Setup”. 2 Operate the “MusicCast CONTRO...

Using the MusicCast Surround function Configuring wireless speakers Using devices that support the MusicCast Surround function, you can enjoy a 5.1.2-channel or 5.1-channelsystem with wireless surround speakers and subwoofer. NOTE Refer to the instruction manual of the devices that support the Music...

NOTE ( In a 5.1.2-channel or 5.1-channel system, the surround speakers and subwoofer can be wireless. With other systems, only thesubwoofer can be wireless. ( With wireless surround speakers ( Sound will not be output from the speaker terminals (SURROUND) and pre-out jacks (SURROUND) on the unit. ( ...

Configuring the speaker settings Flow of the speaker configurations Before using the unit, adjust the speaker settings such as volume balance and acoustic parameters. With thesupplied YPAO microphone, the unit detects speaker connections and measures the distances from them toyour listening position...

5 Connect the YPAO microphone to the YPAO jack. 2 1 3 9 4 5 The unit (front) Ear height The following screen appears on the TV. If you want to enable an item under “Measuring option”, select the item and check its box. 95 PREPARATIONS > Configuring the speaker settings

6 According to the guidance displayed on the screen, start the measurement. The following screen appears on the TV when the measurement finishes. 1 a Warning message (if available) 7 Select “Save” to apply the measurement results to the speaker settings. 8 Disconnect the YPAO microphone from the uni...

Assigning speaker configuration If you use any of the following speaker configurations, configure the corresponding speaker settingsmanually. ( When using the surround back speakers ( When using bi-amp connections or zone connections ( When using the surround speakers placed in front (Virtual CINEMA...

Optional measurement of YPAO YPAO measuring at multiple listening positions (multi measure) Select “Multi Measure” option if you will have several listening positions or if you want others to enjoysurround sound. You can take measurements at up to 8 different positions in the room. The speaker setti...

5 Connect the YPAO microphone to the YPAO jack. 2 1 3 9 4 5 The unit (front) Ear height 6 Select “Multi Measure” under “Measuring option”. 7 According to the guidance displayed on the screen, start the measurement. The following screen appears on the TV when the measurement at the first position fin...

5 Connect the YPAO microphone to the YPAO jack. 2 1 3 9 4 5 The unit (front) Ear height 6 Select “Angle/Height Measure” under “Measuring option”. 7 According to the guidance displayed on the screen, start the measurement. The following screen appears on the TV at the time of angle/height measurement...

8 Attach the supplied pole to the center of the microphone base. Pole Microphone base 9 Place the microphone base at the listening position (same height as your ears) youwill be seated most frequently. We recommend the use of a tripod and adjust your listening position (same height as yourears). You...

11 Press ENTER to start the first angle measurement. The following screen appears on the TV when the first angle measurement finishes. 12 In the same way, perform the angle measurement for the positions “2” and “3”. 13 Set the YPAO microphone at the top of the pole and perform the fourth anglemeasur...

Error messages from YPAO If any error message is displayed, resolve the problem by following on-screen instructions and perform YPAOagain. [Search tag]#Q03 YPAO Error Error message Remedy ERROR 1 Front speakers are not detected. Exit YPAO, turn off the unit, and then check the speaker connections. E...

Warning messages from YPAO If a warning message is displayed, resolve the problem by following table and perform YPAO again. You can still apply the measurement results, however, we recommend you resolve the problem and performYPAO again in order to use the unit with the optimal speaker settings. [S...

ENJOYING SOUND Enjoying sound field effects Selecting your favorite sound mode The unit is equipped with a variety of sound programs and surround decoders. You can enjoy playbacksources with your favorite sound mode such as sound field effect or stereo playback. PRESET BAND BAND TUNING TUNING TUNING...

Enjoying 3-dimentional sound fields The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMADSP HD³). It allows you to easily create sound fields like actual movie theaters or concert halls in your roomand enjoy natural 3-dimensional sound fields. N...

Enjoying sound field effects optimized for the type of content The unit is equipped with a variety of sound programs. You can enjoy playback sources with your favoritesound mode. You can select a sound program by pressing PROGRAM. ( We recommend a sound program in the “MOVIE” category displayed on t...

Action Game This program is suitable for action games, such as car racing and fighting games. The realityof, and emphasis on, various effects makes the player feel like they are right in the middle ofthe action, allowing for greater concentration. Use this program in combination withCompressed Music...

All-Channel Stereo Use this program to output sound from all speakers. When you play back multichannelsources, the unit mixes down the source to 2 channels, and then outputs the sound from allspeakers. This program creates a larger sound field and is ideal for background music atparties. UNPROCESSED...

Enjoying surround sound with headphones (SILENT CINEMA) You can enjoy surround or sound field effects, like a multichannel speaker system, with stereo headphonesby connecting the headphones to the PHONES jack and selecting a sound program or a surround decoder. Related links ( “Enjoying sound field ...

Enjoying unprocessed playback Enjoying original sound (straight decode) You can play back input sources without any sound field effects. The unit produces stereo sound from thefront speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds formultichannel sources. Each...

Enjoying higher quality playback (Pure Direct) The unit allows you to enjoy the high-quality playback with reduced noise. Various processing modes andsome circuitry (such as the front display) other than the basic playback function is suspended. Each time you press PURE DIRECT, the direct playback m...

Enjoying 3-dimensional sound Enjoying Dolby Atmos® and DTS:X™ Playing back Dolby Atmos or DTS:X content creates realistic sound that comes from every direction,including overhead. To receive the full effect, we recommend a speaker system with front presence speakers. About Dolby Atmos® ( Dolby Atmos...

Enjoying favorite sound Enjoying more powerful sound to the audio source(Compressed Music Enhancer) You can enjoy a dynamic sound by adding depth and breadth to the sound. This function can be used alongwith any other sound modes. For digitally compressed formats, you can play back an enriched sound...

Enhancing the low-frequency range from the subwoofer You can enhance the low-frequency range from the subwoofer while avoiding interference with the frontspeakers in middle- and low-frequency range. Set “Subwoofer Trim” in the “Option” menu. Related links “Adjusting the subwoofer volume” (p.182) 124...

Enjoying powerful sound at low volume Automatically you can correct the high- and low-frequency levels, hardly heard at low volume, based on theYPAO measurement results and the auditory sensation. Set “YPAO Volume” in the “Option” menu. NOTE ( “YPAO Volume” works after the YPAO measurement. ( “YPAO ...

Making easy to hear the dialogue sounds You can adjust the volume of dialogue sounds to become easy to hear. Set “Dialogue Level” in the “Option” menu. Related links “Adjusting the volume of dialogue sound” (p.175) 126 ENJOYING SOUND > Enjoying favorite sound

Enjoying bass sound with small speakers (Extra Bass) You can enjoy sufficient bass sound, regardless of the size of the front speakers and the presence or absenceof a subwoofer. Set “Extra Bass” in the “Option” menu. Related links “Setting the use of Extra Bass” (p.183) 127 ENJOYING SOUND > Enjoy...

Enjoying sound better Enjoying music streaming services ( You can listen to better sound in music streaming services. Set Compressed Music Enhancer to “On”. For details, see the following: ( “Enjoying more powerful sound to the audio source (Compressed Music Enhancer)” (p.123) Enjoying sound at a lo...

PLAYBACK Basic playback procedure Basic procedure for playing back video and music Basic procedure for playing back video and music is as follows. 1 Turn on the external devices. 2 Use the input selection keys to select an input source. PRESET BAND BAND TUNING TUNING TUNING TUNING MODE MEMORY MEMORY...

Selecting an HDMI output jack You can select the HDMI OUT jacks for video/audio output. Each time you press HDMI OUT, the HDMI OUTjack to be used for signal output changes. HDMI OUT Outputs the same signal at both the HDMI OUT 1 and HDMI OUT 2 jacks. HDMI OUT Outputs the signals at the HDMI OUT 1 ja...

Item names and functions of the playback screen When playback starts, the playback screen appears on the TV. 2 1 a Status indicators Display the current shuffle/repeat settings and playback status (such as play/pause). b Playback information Displays the artist name, album name, song title, track nu...

Item names and functions of the browse screen When the following input source is selected, the browse screen appears on the TV. ( SERVER ( NET RADIO ( USB 2 1 3 4 a Status indicators Display the current shuffle/repeat settings. b Contents list Displays the list of contents. Select an item and press ...

Playing back TV audio Playback of TV audio with eARC/ARC Connect your TV that supports eARC/ARC to the unit with an HDMI cable to play back the TV audio on theunit. When you select a TV program with the TV remote control, the input source of the unit will be automaticallyswitched to “TV” and the TV ...

Playback of TV audio with a digital optical cable In the following case, use a digital optical cable to input TV audio to the unit. ( Your TV does not support eARC/ARC. ( You do not want to use eARC/ARC. 1 Set “ARC” in the “Setup” menu to “Off”. 2 Select a video content (a TV program) with the TV re...

Listening to the radio Preparing to listen to the radio Setting the frequency steps Model For Asia, Taiwan, Brazil, General, and Central and South America Set the radio tuning frequency steps of the unit depending on your country or region. At the factory, the frequency step setting is set to 50 kHz...

Preparing the DAB tuning Model For U.K., Europe, Russia and Australia Before listening to DAB (Digital Audio Broadcasting) radio, perform an initial scan to register the DAB radiostations automatically. 1 Select “TUNER” as the input source. 2 Press BAND to select the DAB band. 3 Press [ j TUNING] to...

Displaying the Radio Data System information Model For U.K., Europe and Russia Radio Data System is a data transmission system used by FM stations. The unit can receive various types ofdata, such as “Program Service”, “Program Type”, “Radio Text” and “Clock Time”, when it is tuned in to aRadio Data ...

Displaying the DAB information Model For U.K., Europe, Russia and Australia The unit can receive various types of DAB information when it is tuned into a DAB radio station. 1 Tune in to the desired DAB radio station. 2 Push and rotate SELECT/ENTER on the front panel to select between the variousdisp...

Registering a radio station manually Tune in to a radio station and register it to a preset number. 1 Tune in to the desired radio station. 2 Hold down MEMORY for 3 seconds. 3 Press PRESET to select the preset number. 4 Press MEMORY. This completes the registration. NOTE ( You can register up to 40 ...

Registering FM radio stations automatically (Auto Preset) You can register FM radio stations automatically. FM radio stations with strong signals are automaticallyregistered to the preset numbers. 1 Select the FM band. 2 Hold down MEMORY for 3 seconds. 3 Press PRESET to select the preset number from...

Clearing preset stations Clears radio stations registered to the preset numbers. 1 Select “TUNER” as the input source. 2 Hold down MEMORY for 3 seconds. 3 Press PRESET to select a preset station to be cleared. 4 Press MODE. The preset station is cleared. 5 Repeat steps 3 to 4 until all desired prese...

Playing back music with the Bluetooth® connection Playback of Bluetooth® device music on the unit You can play back music files stored on a Bluetooth device (such as smartphones) on the unit. CAUTION ( When you use Bluetooth device controls to adjust volume, the volume may be unexpectedly loud, and ...

Playback of music using Bluetooth® speakers/headphones You can enjoy audio played back on the unit using Bluetooth speakers/headphones. Be sure to connect the Bluetooth speakers/headphones whose volume is adjustable. You cannot adjust thevolume of the Bluetooth speakers/headphones from the unit. Blu...

Playing back music with AirPlay Playback of music with AirPlay The AirPlay allows you to play back music on the unit. Tap (Click) the AirPlay icon on your iPhone or iTunes/music and select the unit as the audio output device. CAUTION ( When you use AirPlay device controls to adjust volume, the volum...

Playing back music stored on a USB flash drive Playback of USB flash drive content You can play back music files stored on a USB flash drive on the unit. 1 Connect the USB flash drive to the USB jack. PHONES USB YPAO 5V 1A The unit (front) USB flash drive 2 Select “USB” as the input source. The brow...

Playing back music stored on media servers (PCs/NAS) Playback of music media servers (PCs/NAS) You can play back music files stored on your media server on the unit. NOTE You need to configure the media sharing setting on each device or media server software in advance. For details, refer to theinst...

Listening to Internet radio Selecting an Internet radio station Select an Internet radio station and start playback. 1 Select “NET RADIO” as the input source. The browse screen is displayed on the TV. 2 Select an item. Playback starts and the playback screen is displayed. NOTE ( Press NET repeatedly...

Listening to music streaming services Listening to a music streaming service You can enjoy the music content delivered from streaming services. For details on supported music streaming services, refer to products information of the Yamaha website orthe MusicCast CONTROLLER app. Additional informatio...

USEFUL FUNCTIONS Sleep timer function Setting the time of the sleep timer The unit switches to the standby mode after set time passes. Press SLEEP repeatedly to set the time of thesleep timer (120 min, 90 min, 60 min, 30 min, off). When the sleep timer is on, the sleep timer indicator lightsup on th...

SCENE function Selecting the input source and favorite settings with onetouch (SCENE) The SCENE function allows you to select the input source and settings registered to the corresponding scenewith just one touch. The settings which can be registered are as follows. [Search tag]#Q04 SCENE ( HDMI Con...

Selecting a registered scene Press a SCENE number key on the remote control, and the settings registered to the corresponding scene aredirectly selected. Alternatively, you can also select a registered scene by pressing SCENE switching keyrepeatedly. The unit turns on automatically when it is in sta...

Registering a scene You can change the default setting assigned to each SCENE number key. When “NET”, “USB” or “TUNER” isselected for the input source, you can register the assigned radio station or content. [Search tag]#Q04 SCENE 1 Prepare the unit’s settings you want to assign to a SCENE number ke...

Shortcut function Registering a favorite content as shortcut You can register favorite content (such as music stored on media servers and Internet radio stations) asshortcuts. 1 Play back a song or a radio station to be registered. 2 Hold down MEMORY for 3 seconds. MEMORY PRESET BAND BAND TUNING TUN...

Recalling a registered content as shortcut Recall a registered content (such as music stored on media servers and Internet radio stations) by selectingthe shortcut number. 1 Press BLUETOOTH, NET or USB. NET USB BLUETOOTH PRESET BAND BAND TUNING TUNING TUNING TUNING MODE MEMORY MEMORY RED GREEN YELLO...

ENJOYING IN MULTIPLE ROOMS (ZONES) Preparing zones Playback in multiple rooms (multi zone function) You can play back an input source in the room where the unit is installed and in another room. You can use the unit according to your favorite, for example, while you are watching TV in the living roo...

Multi-zone configuration examples You can enjoy videos/music using TVs and speakers placed in other rooms. n Enjoying music using speakers Living room (Main zone) Study room (Zone2) Audio (SPEAKERS or ZONE OUT) n Enjoying videos/music using a TV and speakers Living room (Main zone) Study room (Zone2...

n Enjoying videos/music using only a TV Living room (Main zone) Study room (Zone2) Video/audio (HDMI) Related links ( “Connecting zone speakers using the unit’s internal amplifier” (p.162) ( “Connecting an HDMI device in zone” (p.164) 161 ENJOYING IN MULTIPLE ROOMS (ZONES) > Preparing zones

Connecting zone speakers Connecting zone speakers using the unit’s internal amplifier Connect zone speakers to the unit with speaker cables. And according to the speaker’s connection, changeyour speaker configuration setting. NOTICE ( Unplug the unit’s power cable from an AC wall outlet before conne...

Connecting zone speakers using an external amplifier Connect the external amplifier placed in zone to the unit with a stereo pin cable. You can adjust the volumefor zone output with the unit. When using an external amplifier with volume control, set “Volume” in “Zone2”in the “Setup” menu to “Fixed”....

Connecting an HDMI device in zone Connecting an HDMI device in zone to the unit Connect an HDMI device (such as a TV) to play back videos/audio in zone. With an HDMI cable, HDMI OUT 3(ZONE OUT) jack on the unit is connected to it. ( Videos/audio interruptions may happen in another zone when any of t...

Operating zones Turning on/off the power of zones Switch the power of each zone between on and off. 1 Set the zone switch on the remote control to the zone that you want to operate. 2 Press z . Each time you press the key, you can turn on/off the zone. When the zone is turned on, “ZONE” lights up on...

Basic procedure in zone Basic procedure for playback in zone is as follows. The zone selected by the zone switch can be operated. 1 Turn on the zone. 2 Turn on the external devices connected to the unit. 3 Use the input selection keys to select an input source. 4 Start playback on the external devic...

Other procedure in zone Other procedure in every zone is as follows. ( Press SCENE key to select the input source and settings with just one touch. ( To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP repeatedly. The zone output willbe disabled after a specified period of tim...

Enjoying the same source in multiple rooms (party mode) The party mode allows you to play back in all zones the same music that is being played back in the Mainzone. During the party mode, stereo playback is automatically selected for all zones. Each time you press PARTY, the party mode is turned on...

CONFIGURATIONS Configuring the unit Using the menu The unit is equipped with following menus. “Option” menu: You can configure playback settings according to the input source currently being played back. Operate thismenu displayed on the TV with the remote control. “Setup” menu: You can configure th...

Configuring playback settings for different playbacksources (Option menu) Basic operation of the Option menu Perform the following basic procedure to operate the “Option” menu. Operate this menu displayed on the TVwith the remote control. 1 Press OPTION. POP-UP /MENU HOME TOP MENU PRESET BAND BAND T...

Option menu items Use the following table to configure playback settings of the unit. Item Page Tone Control p.172 YPAO Volume YPAO Volume p.173 Adaptive DRC p.174 Dialogue Dialogue Level p.175 DTS Dialogue Control p.176 Dialogue Lift p.177 Lipsync Lipsync p.178 Enhancer Enhancer p.179 Hi-Res Mode p...

Adjusting the tone of the audio output Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually. Option menu “Tone Control” Setting range -6.0 dB to +6.0 dB NOTE ( When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears. ( If you set an extreme value, sounds ...

Adjusting the dynamic range automatically Selects whether to adjust the dynamic range (from maximum to minimum) to the volume automatically. Ifthis function is set to “On”, it is useful for listening to playback at a low volume at night. Option menu “YPAO Volume” > “Adaptive DRC” Settings Off Doe...

Adjusting the dialogue sounds Adjusting the volume of dialogue sound Adjusts the volume of dialogue sounds that are hardly heard. Higher value strengthens the dialogue sounds. Option menu “Dialogue” > “Dialogue Level” Setting range 0 to 3 NOTE This setting will be disabled if the following condit...

Adjusting the volume of dialogue sound during DTS:X™ playback Adjusts the volume of dialogue sounds that are hardly heard for DTS:X content. Higher value strengthens thedialogue sounds. Option menu “Dialogue” > “DTS Dialogue Control” Setting range 0 to 6 NOTE This setting is available only when D...

Adjusting the perceived height of dialogue sound Adjusts the perceived height of dialogue sounds when the position (height) of dialogue sound is artificial.Bigger setting value gets the higher position. If the dialogue sounds as if it is coming from below the screen, you can raise its perceived heig...

Adjusting the delay of the Lipsync function Adjusts the delay between video and audio output (Lipsync) manually. This setting is available only when“Delay Enable” in the “Setup” menu is set to “Enable” for each input source. Option menu “Lipsync” > “Lipsync” Setting range 0 ms to 500 ms Related l...

Setting Compressed Music Enhancer Selects whether to use Compressed Music Enhancer. You can also use ENHANCER on the remote control toenable/disable Compressed Music Enhancer. Option menu “Enhancer” > “Enhancer” Settings Off Disables Compressed Music Enhancer. On Enables Compressed Music Enhancer...

Setting the high-resolution mode Selects whether to use the high-resolution mode when “Enhancer” is set to “On”. If this function is set to“On”, you can enhance the quality of 2-channel uncompressed digital audio (such as PCM) and losslesscompressed digital audio (such as FLAC) using Compressed Musi...

Correcting volume differences during playback Correcting volume differences between input sources Corrects volume differences between input sources. If you are bothered by volume differences whenswitching between input sources, use this function to correct it. Option menu “Volume Trim” > “Input T...

Adjusting the subwoofer volume Fine-adjusts the subwoofer volume. Option menu “Volume Trim” > “Subwoofer Trim” Setting range -6.0 dB to +6.0 dB Related links “Basic operation of the Option menu” (p.170) 182 CONFIGURATIONS > Configuring playback settings for different playback sources (Option m...

Setting the use of Extra Bass Uses Extra Bass to enhance bass sound. If this function is set to “On”, you can enjoy sufficient bass sounds,regardless of the size of the front speakers and the presence or absence of the subwoofer. Option menu “Extra Bass” > “Extra Bass” Settings Off Disables Extra...

Enabling the video signal processing Selects whether to use the video signal processing (resolution and aspect ratio) settings configured in “VideoMode” in the “Setup” menu. Option menu “Video Processing” > “Video Mode” Settings Direct Disables the video signal processing. Processing Enables the ...

Configuring the shuffle/repeat setting Configuring the shuffle setting Configures the shuffle setting for playback. Option menu “Shuffle / Repeat” > “Shuffle” Settings Off Turns off the shuffle function. On Plays back songs in the current album (folder) in random order. NOTE This setting is avail...

Configuring the repeat setting Configures the repeat setting for playback. Option menu “Shuffle / Repeat” > “Repeat” Settings Off Turns off the repeat function. One Plays back the current song repeatedly. All Plays back all songs in the current album (folder) repeatedly. NOTE This setting is avai...

Adding a “NET RADIO” radio station to the “Favorites” folder When you select “NET RADIO” as the input source, you can register the currently playing radio station to the“Favorites” folder. On the playback screen, the current station is added to the “Favorites” folder. On the browse screen, the stati...

Removing a radio station from the “Favorites” folder Removes a radio station from the “Favorites” folder. On the browse screen, select the station to be removedin advance. Option menu “Remove from favorites” 189 CONFIGURATIONS > Configuring playback settings for different playback sources (Option...

Checking the current status information Displays the current status information on the TV. Use the left/right cursor keys to display other informationon each hierarchy of the “Setup” menu. Option menu “On-screen Information” Input source/Party mode status CINEMA DSP status Volume status Audio format...

Configuring various functions (Setup menu) Basic operation of the Setup menu Perform the following basic procedure to operate the “Setup” menu. Operate this menu displayed on the TVwith the remote control. 1 Press SETUP. PRESET BAND BAND TUNING TUNING TUNING TUNING MODE MEMORY MEMORY RED GREEN YELLO...

Setup menu items Speaker Settings Item Page Setting Pattern p.201 Setting Data Copy p.202 Power Amp Assign p.203 Configuration Front p.204 Center p.204 Surround p.204 Surround Back p.204 Front Presence p.204 Subwoofer p.208 Distance p.210 Level p.211 Parametric EQ p.212 Speaker Impedance p.214 Test ...

Sound Settings Item Page Information p.217 Lipsync Delay Enable p.218 Auto/Manual Select p.219 Adjustment p.220 DSP Parameter (sound program) p.221 All-Channel Stereo Level p.223 Front / Rear Balance p.224 Left / Right Balance p.225 Height Balance p.226 Monaural Mix p.227 Dynamic Range p.228 Volume ...

Scene Settings Item Page Scene Setting p.237 Scene Rename p.238 195 CONFIGURATIONS > Configuring various functions (Setup menu)

Network Settings Item Page Information p.250 Network Connection p.251 IP Address p.253 Network Standby p.254 DMC Control p.255 AirPlay Volume Interlock p.256 Network Name p.257 MusicCast Link Power Interlock p.258 197 CONFIGURATIONS > Configuring various functions (Setup menu)

Bluetooth Settings Item Page Bluetooth p.259 Audio Receive Disconnect p.260 Bluetooth Standby p.261 Bluetooth Volume Interlock p.262 Audio Send Transmitter p.263 Device Search p.264 198 CONFIGURATIONS > Configuring various functions (Setup menu)

Multi Zone Settings Item Page Information p.265 (zone) Volume p.266 Max Volume p.267 Initial Volume p.268 Audio Delay p.269 Monaural p.270 Enhancer p.271 Tone Control p.272 Extra Bass p.273 Left / Right Balance p.274 Zone Rename p.275 Party Mode Set p.276 199 CONFIGURATIONS > Configuring various ...

System Settings Item Page Information p.277 Language p.278 Audio In p.279 TV Audio Input p.280 Input Skip p.281 Input Rename p.282 Auto Play p.284 DSP Skip p.285 Tuner p.286 Remote Key PROGRAM Key p.287 Color Key p.288 Display Settings Dimmer p.289 Volume p.290 Short Message p.291 Position p.292 Wal...

Configuring the speaker settings Selecting the speaker setting pattern Registers speaker setting patterns. The following speaker settings will be memorized in the selected pattern. ( Power Amp Assign ( Configuration ( Distance ( Level ( Parametric EQ ( Measurement results (YPAO) Setup menu “Speaker”...

Copying the speaker setting pattern Copies the “Setting Pattern” parameters to another pattern. Setup menu “Speaker” > “Setting Data Copy” 1 Select the speaker setting pattern in Source. 2 Select the pattern in Destination. 3 Select “Copy”. The pattern is copied. NOTE “Copy” is not selectable if ...

Setting your speaker system Selects the setting according to the speakers that are connected. Setup menu “Speaker” > “Power Amp Assign” Settings Basic A normal speaker system. 7.1 +1Zone Zone speakers in addition to the 7.1 system in the Main zone. 5.1.2 +1Zone Zone speakers in addition to the 5....

Setting the use of each speaker and its size Selects the setting according to the use and size of your speakers. Setup menu “Speaker” > “Configuration” > (speaker) Settings Small Small speakers. As a general guideline, the woofer diameter is smaller than 16 cm (6.1/4”). The subwoofer will prod...

Setting the layout of the surround speakers Selects a surround speaker layout when surround speakers are used. This setting is not available when“Surround” is set to “None”. Setup menu “Speaker” > “Configuration” > “Surround” > “Layout” Settings Rear The surround speakers are placed on the ...

Setting the layout of the front presence speakers Selects a presence layout when front presence speakers are used. This setting facilitates the optimization ofthe sound field effect. Setup menu “Speaker” > “Configuration” > “Front Presence” > “Layout” Settings Front Height The front presenc...

Setting the crossover frequency of the low-frequency components Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to“Small”. A frequency sound lower than the specified value will be produced from the subwoofer or front speakers. Setup menu “Spea...

Setting the use of a subwoofer Selects the setting according to the use of your subwoofer. Setup menu “Speaker” > “Configuration” > “Subwoofer” Settings Use One or two subwoofers are connected. The subwoofer will produce LFE (low-frequency effect) channel audio and low-frequencycomponents from...

Setting the phase of the subwoofer Sets the phase of the subwoofer. When the bass sound is lacking, switch the subwoofer phase. Setup menu “Speaker” > “Configuration” > “Subwoofer” > “Phase” Settings Normal Does not reverse the subwoofer phase. Reverse Reverses the subwoofer phase. Related ...

Adjusting the volume of each speaker Adjusts the volume of each speaker to suit your listening position. Setup menu “Speaker” > “Level” > (speaker) Setting range -10.0 dB to +10.0 dB NOTE Test tone output helps you to adjust the speaker balance while confirming its effect. Related links ( “Set...

Setting the equalizer Selects the type of equalizer to adjust the tone. Setup menu “Speaker” > “Parametric EQ” Settings Manual Adjusts the equalizer manually. YPAO:Flat Adjusts each speaker to achieve the same characteristics. YPAO:Front Adjusts each speaker to achieve the same characteristics as...

Setting the speaker impedance Sets the unit’s speaker impedance settings depending on the impedance of the speakers connected. Setup menu “Speaker” > “Speaker Impedance” Settings 6 Ω MIN For 6-ohm or higher speakers. You can also connect 4-ohm speakers for the front speakers. 8 Ω MIN For 8-ohm or...

Outputting test tones Outputs the test tone when you adjust the speaker balance or equalizer while confirming its effect. Setup menu “Speaker” > “Test Tone” Settings Off Does not output test tones. On Outputs test tones. Related links “Basic operation of the Setup menu” (p.191) 215 CONFIGURATIONS...

Reloading the previous YPAO adjustments Reloads the previous YPAO adjustments. You can use this function to retry the YPAO measurement when the speaker settings you have configuredmanually are not suitable. Setup menu “Speaker” > “YPAO Result” > “Setup Reload” Related links ( “Flow of the spea...

Configuring the sound settings Checking the audio signal information Displays information about the audio signal and the status of sound settings. Setup menu “Sound” > “Information” Input Format Audio format of the input signal Channel The number of source channels in the input signal (front/surr...

Enabling Lipsync adjustment Selects whether to use the delay adjustment between video and audio output (Lipsync). Setup menu “Sound” > “Lipsync” > “Delay Enable” Settings Disable Disables the “Lipsync” adjustment. Enable Enables the “Lipsync” adjustment. NOTE This setting is applied separately...

Setting the adjustment method of the Lipsync function Selects the method for adjusting the delay between video and audio output (Lipsync). Setup menu “Sound” > “Lipsync” > “Auto/Manual Select” Settings Manual Adjusts the delay between video and audio output manually. The setting in “Adjustment...

Adjusting the sound field effect level Adjusts the effect level of the sound program to enhance or reduce the sound field effect. Select the sound program and press ENTER for adjusting. Setup menu “Sound” > “DSP Parameter” > (sound program) Setting range Item Function Settings DSP Level Adjust...

Adjusting the entire volume Adjusts the entire volume. This setting is effective when “All-Channel Stereo” is selected in the soundprograms. Setup menu “Sound” > “All-Channel Stereo” > “Level” Setting range -5 to +5 Related links “Basic operation of the Setup menu” (p.191) 223 CONFIGURATIONS &...

Adjusting the front and rear volume balance Adjusts the front and rear volume balance. Higher value enhances the front side, and lower value enhancesthe rear side. This setting is effective when “All-Channel Stereo” is selected in the sound programs. Setup menu “Sound” > “All-Channel Stereo” >...

Adjusting the left and right volume balance Adjusts the left and right volume balance. Higher value enhances the right side, and lower value enhancesthe left side. This setting is effective when “All-Channel Stereo” is selected in the sound programs. Setup menu “Sound” > “All-Channel Stereo” >...

Adjusting the height volume balance Adjusts the height volume balance using the front presence speakers. Higher value enhances the upside, andlower value enhances the downside. This setting is effective “All-Channel Stereo” is selected in the soundprograms. Setup menu “Sound” > “All-Channel Stere...

Setting the use of Monaural Mix Outputs mixed monaural sound. This setting is effective when “All-Channel Stereo” is selected in the soundprograms. Setup menu “Sound” > “All-Channel Stereo” > “Monaural Mix” Settings Off Disables monaural sound output. On Enables monaural sound output. Related ...

Setting the dynamic range adjustment method Selects the dynamic range (from maximum to minimum) adjustment method for Dolby Digital and DTSsignals playback. Setup menu “Sound” > “Dynamic Range” Settings Maximum Produces audio without adjusting the dynamic range. Standard Optimizes the dynamic ran...

Setting the limit value of the volume Sets the limit value of the volume adjusted by using such as VOLUME keys on the remote control. Setup menu “Sound” > “Volume” > “Max Volume” Setting range -60.0 dB to +15.0 dB, +16.5 dB [20.5 to 95.5, 97.0] Related links “Basic operation of the Setup menu”...

Setting the initial volume for when the unit is turned on Sets the initial volume when the unit is turned on. Setup menu “Sound” > “Volume” > “Initial Volume” Settings Off Sets the volume level when it last entered standby mode. On Mute Mutes the audio output. -80.0 dB to +16.5 dB [0.5 to 97.0...

Setting the video output during the Pure Direct Selects whether to output video signals when the Pure Direct is effective. Setup menu “Sound” > “Pure Direct Mode” Settings Auto Outputs video signals. Any videos from the selected input source or the on-screen display are automaticallydisplayed. Wh...

Adjusting the sound field effect level automatically Selects whether to automatically adjust the effect level of the sound program. Setup menu “Sound” > “Adaptive DSP Level” Settings Off Does not adjust the effect level automatically. On Adjusts the effect level automatically depending on the YPA...

Setting Virtual Surround Back Speaker (VSBS) Selects whether to create Virtual Surround Back Speaker (VSBS). When VSBS is enabled, the unit createsVSBS using the surround speakers even if no surround back speakers are connected. Setup menu “Sound” > “Virtual Speaker” > “VSBS” Settings Off Does...

Setting Dolby Speaker Virtualization Selects whether to create Dolby Speaker Virtualization that is virtual processing optimized for Dolby content. Dolby Speaker Virtualization is more effective with the Dolby Surround decoder. Setup menu “Sound” > “Virtual Speaker” > “Dolby Speaker Virtualiza...

Setting DTS Format Notification Informs the BD player about the DTS formats that the unit supports. Setup menu “Sound” > “DTS Mode” Settings Mode 1 Conforms to the DTS:X standard. This setting is used normally. Mode 2 This setting is used if the BD player fails to properly output a DTS signal eve...

Configuring the scene settings Selecting items to be included as the scene assignments Selects items to be included as the scene assignments. You can also view the settings currently assigned tothe selected scene. Setup menu “Scene” > “Scene Setting” 1 Select the SCENE name and press ENTER. 2 Sel...

Renaming the SCENE name Changes the SCENE name displayed on the front display or on the TV. Setup menu “Scene” > “Scene Rename” 1 Select the SCENE name and press ENTER to enter the name edit screen. 2 Edit the name. 3 Select “SAVE”. 4 Press SETUP. This completes the settings. NOTE ( To clear the ...

Configuring the video/HDMI settings Checking the HDMI signal information Displays information about the HDMI signal. Setup menu “Video/HDMI” > “Information” HDMI Signal Resolutions and video information of HDMI input/output signal HDMI Monitor Resolutions supported by the TV Related links “Basic ...

Setting the use of the video signal processing Sets the video signal processing (resolution and aspect ratio). Setup menu “Video/HDMI” > “Video Mode” > “Video Mode” Settings Direct Disables the video signal processing. Processing Enables the video signal processing. The settings in “Resolution...

Setting a resolution to output HDMI video signals Selects a resolution to output HDMI video signals when “Video Mode” in the “Setup” menu is set to“Processing”. Setup menu “Video/HDMI” > “Video Mode” > “Resolution” Settings Through Does not convert the resolution. Auto Selects a resolution aut...

Setting an aspect ratio to output HDMI video signals Selects an aspect ratio (the ratio of the width and the height) to output HDMI video signals when “VideoMode” in the “Setup” menu is set to “Processing”. Setup menu “Video/HDMI” > “Video Mode” > “Aspect” Settings Through Does not convert the...

Setting the use of HDMI Control Selects whether to use HDMI Control which operate HDMI Control-compatible devices. Setup menu “Video/HDMI” > “HDMI Control” > “HDMI Control” Settings Off Disables HDMI Control. On Enables HDMI Control. The settings in “ARC” and “Standby Sync” are applied. NOTE Y...

Setting the use of ARC Selects whether to output TV audio to the speakers connected to the unit when “HDMI Control” in the“Setup” menu is set to “On”. Setup menu “Video/HDMI” > “HDMI Control” > “ARC” Settings Off Disables ARC. On Enables ARC. NOTE You do not need to change “On” (default settin...

Linking the standby modes of the unit and the TV Selects whether to use HDMI control to link the unit's standby mode to the TV's power when “HDMI Control”in the “Setup” menu is set to “On”. Setup menu “Video/HDMI” > “HDMI Control” > “Standby Sync” Settings Off Does not link the unit's standby ...

Setting the output of HDMI audio to the TV's speakers Selects whether to output HDMI audio to the speakers of a TV connected via the HDMI OUT jack. Setup menu “Video/HDMI” > “HDMI Audio Output” > “HDMI OUT1”/“HDMI OUT2”/“HDMI ZONE OUT” Settings Off Disables audio output from the TV. On Enables...

Setting the version of HDCP used on the HDMI input jacks Selects the HDCP version of the HDMI input jacks. You can set this function for watching 4K video content ifnecessary. Setup menu “Video/HDMI” > “HDCP Version” > (HDMI input) Settings Auto Automatically sets the version of HDCP according...

Setting the use of HDMI Standby Through Selects whether to output video/audio, which is input through HDMI jacks, to the TV when the unit is instandby mode. Setup menu “Video/HDMI” > “HDMI Standby Through” Settings Off Does not output video/audio to the TV. On Outputs video/audio to the TV. The u...

Setting the HDMI 4K signal format Selects the format of signals input/output at the unit when HDMI 4K compatible TV and playback device areconnected to the unit. Setup menu “Video/HDMI” > “HDMI Video Format” > (HDMI input) Settings Mode 1 Inputs/outputs 4K signals shown in the following table....

Configuring the network settings Checking the network information of the unit Displays the network information of the unit. Setup menu “Network” > “Information” DHCP DHCP on/off (use of a DHCP server or not) IP Address IP address Subnet Mask Subnet mask Default Gateway The IP address of the defau...

Setting the network parameters automatically (DHCP) Sets the network parameters (such as IP address, Subnet Mask, and Default Gateway) automatically using aDHCP server. Setup menu “Network” > “IP Address” > “DHCP” Settings Off Does not use a DHCP server. You can configure the network parameter...

Setting the network parameters manually Sets the network parameters (such as IP address, Subnet Mask, and Default Gateway) manually. Setup menu “Network” > “IP Address” 1 Set “DHCP” to “Off”. 2 Select “IP Address”. 3 Select a parameter type. 4 Set the network parameter. 5 Press ENTER. 6 To set an...

Setting the use of the Network Standby function Selects whether the unit can be turned on from other network devices. Setup menu “Network” > “Network Standby” Settings Off Disables the network standby function. On Enables the network standby function. The unit consumes more power than when “Off” ...

Setting the use of a Digital Media Controller Selects whether to allow a Digital Media Controller (DMC) to control playback. If this function is enabled, youcan control playback of the unit from DMCs on the same network. Setup menu “Network” > “DMC Control” Settings Disable Does not allow DMCs to...

Setting the use of volume control via AirPlay Selects whether to use volume control from AirPlay devices. If other than “Off” is set, you can adjust theunit’s volume from the AirPlay devices. Setup menu “Network” > “AirPlay Volume Interlock” Settings Off Disables volume control from AirPlay devic...

Setting the network name of the unit Edits the unit’s name on the network (the network name) displayed on other network devices. Setup menu “Network” > “Network Name” 1 Press ENTER. 2 Edit the name. 3 Select “SAVE”. 4 Press SETUP. This completes the settings. NOTE ( To clear the entry, select “CL...

Configuring the Bluetooth® settings Setting the use of Bluetooth® Selects whether to use the Bluetooth function. Setup menu “Bluetooth” > “Bluetooth” Settings Off Disables the Bluetooth function. On Enables the Bluetooth function. Related links “Basic operation of the Setup menu” (p.191) 259 CONF...

Setting the use of the Bluetooth® Standby function Selects whether to turn on the unit from Bluetooth devices. If this function is set to “On”, the unitautomatically turns on when a connect operation is performed on the Bluetooth device. Setup menu “Bluetooth” > “Audio Receive” > “Bluetooth St...

Setting the use of volume control via Bluetooth Selects whether to use volume control from Bluetooth devices. If other than “Off” is set, you can adjust theunit’s volume from the Bluetooth devices. Setup menu “Bluetooth” > “Audio Receive” > “Bluetooth Volume Interlock” Settings Off Disables vo...

Setting the use of audio transmission to a Bluetooth® device Selects whether to transmit audio played back on the unit to Bluetooth devices (such as speakers andheadphones). Setup menu “Bluetooth” > “Audio Send” > “Transmitter” Settings Off Disables the Bluetooth audio transmitter function. On...

Connecting the unit to a Bluetooth® device that receivestransmitted audio Establishes a connection between the unit and Bluetooth devices (such as speakers and headphones) thatreceive audio transmitted from the unit when "Transmitter" is set to "On" in the "Setup" menu. Setup...

Configuring the multi zone settings Checking the zone information Displays information about zone. Setup menu “Multi Zone” > “Information” On/Off The power on/off for zone Input The input source selected for zone Volume The volume setting for zone Tone Control The tone control setting (the level ...

Setting the use of volume adjustments for zone output Sets volume adjustments for zone output. If you have connected an external amplifier with volume control to the unit, set this function to “Fixed”. Setup menu “Multi Zone” > (zone) > “Volume” Settings Fixed Disables volume adjustments for z...

Setting the zone upper limit of the volume Sets the zone upper limit of the volume adjusted by using such as VOLUME keys on the remote control. Setup menu “Multi Zone” > (zone) > “Max Volume” Setting range -60.0 dB to +15.0 dB, +16.5 dB [20.5 to 95.5, 97.0] NOTE This setting is available only ...

Setting the zone initial volume for when the unit is turned on Sets the zone initial volume for when the unit is turned on. Setup menu “Multi Zone” > (zone) > “Initial Volume” Settings Off Sets the level at the volume level when it last entered standby mode. On Mute Mutes the audio output. -80...

Adjusting the time deviation in relation to the Main zone Adjusts the time deviation (Audio Delay) in relation to the Main zone. Setup menu “Multi Zone” > (zone) > “Audio Delay” Setting range 0 ms to 100 ms Related links “Basic operation of the Setup menu” (p.191) 269 CONFIGURATIONS > Confi...

Setting the use of monaural sounds for zone output Selects whether to produce monaural sounds for zone output. Setup menu “Multi Zone” > (zone) > “Monaural” Settings Off Does not produce monaural sounds in zone. On Produces monaural sounds in zone. Related links “Basic operation of the Setup m...

Setting the use of Compressed Music Enhancer for zone output Sets Compressed Music Enhancer for zone output. You can also use ENHANCER on the remote control. Setup menu “Multi Zone” > (zone) > “Enhancer” Settings Off Disables Compressed Music Enhancer. On Enables Compressed Music Enhancer. Rel...

Adjusting the tone for zone output Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for zone output. Setup menu “Multi Zone” > (zone) > “Tone Control” Settings Auto Adjusts the levels of Treble and Bass automatically in synchronization with the main volume. Man...

Setting the use of Extra Bass for zone output Sets Extra Bass for zone output. If Extra Bass is enabled, you can enjoy sufficient bass sounds, regardless ofthe size of speakers. Setup menu “Multi Zone” > (zone) > “Extra Bass” Settings Off Disables Extra Bass. On Enables Extra Bass. Related lin...

Adjusting the volume balance for zone output Adjusts the volume balance for zone output. Higher value enhances the right side volume, and lower valueenhances the left side volume. Setup menu “Multi Zone” > (zone) > “Left / Right Balance” Setting range -20 to +20 Related links “Basic operation ...

Renaming the zone name Changes the zone name displayed on the TV. Setup menu “Multi Zone” > “Zone Rename” 1 Select a zone name to be renamed. The cursor moves to the name edit screen. 2 Edit the name. 3 Select “SAVE”. 4 Press SETUP. NOTE ( To clear the entry, select “CLEAR”. ( To restore the defa...

Setting the use of switching to the party mode on zone Enables switching to the party mode. Setup menu “Multi Zone” > “Party Mode Set” > (target zone) Settings Disable Disables switching to the party mode. Enable Enables switching to the party mode. You can turn on/off the party mode by pressi...

Configuring the system settings Checking the system information on the unit Displays the system information on the unit. Setup menu “System” > “Information” Remote Sensor The use of the remote control on the front panel Remote ID The unit’s remote control ID setting System ID System ID number Fir...

Setting the menu language Selects the menu language such as the Setup menu. Setup menu “System” > “Language” Settings English English 日本語 Japanese Français French Deutsch German Español Spanish Русский Russian Italiano Italian 中文 Chinese Related links “Basic operation of the Setup menu” (p.191) 2...

Combining an audio input jack with a HDMI input jack Selects the audio input jack to play back together with a HDMI input jack. You can play back HDMI video withaudio via an audio input jack except HDMI input jack. After select HDMI you want to set as the input source, select an audio input jack in ...

Setting the audio input jack used for TV audio Selects an audio input jack, which connected to TV audio output, of the unit. When you switch the input source of the unit to “TV”, the playback of TV audio is as follows. ( Without eARC/ARC function: the TV audio is played back with the audio input jac...

Setting input sources to be skipped when operating the INPUT key Sets which input sources are skipped when operating the INPUT key. You can select the desired input sourcequickly by using this function. Setup menu “System” > “Input Skip” > (input) Settings Off Does not skip the selected input ...

Automatically setting the input source names Automatically sets the input source names depending on the connected external device. Setup menu “System” > “Input Rename” > (input) 1 Select an input source to be renamed. 2 Select “Auto”. 3 To change another input source name, repeat steps 1 to 2....

Manually setting the input source names Manually sets the input source names. Setup menu “System” > “Input Rename” > (input) 1 Select an input source to be renamed. 2 Select “Manual”. 3 Press ENTER. 4 Edit the name. 5 Select “SAVE”. 6 To change another input source name, repeat steps 1 to 5. 7...

Setting the use of Auto Play function Selects whether to use Auto Play function in the content such as streaming services. Setup menu “System” > “Auto Play” Settings Off Disables Auto Play function. On Starts automatically to play back the last content which you played back. Auto Starts automatic...

Changing the FM/AM tuning frequency setting Model For Asia, Taiwan, Brazil, General, and Central and South America Sets the FM/AM tuning frequency setting of the unit depending on your country or region. Setup menu “System” > “Tuner” > “Frequency Step” Settings FM100/AM10 Adjusts the FM freque...

Setting the function for the PROGRAM keys on the remote control Sets the function that is assigned to the PROGRAM keys on the remote control. You can use the PROGRAMkeys for other than the sound program selection. Setup menu “System” > “Remote Key” > “PROGRAM Key” Settings Assign1 Enables sele...

Setting the functions for the color keys on the remote control Sets the functions for the RED/GREEN/YELLOW/BLUE keys on the remote control. Setup menu “System” > “Remote Key” > “Color Key” Settings Default Assigns the functions of devices connected to the unit with an HDMI cable. This setting ...

Adjusting the brightness of the front display Adjusts the brightness of the following on the front panel. Higher value brightens the front display. ( Front display ( Indicators (SURROUND:AI, ZONE, PURE DIRECT) Setup menu “System” > “Display Settings” > “Dimmer” Front Display menu “Dimmer” Sett...

Setting the scale of the volume display Switches the scale of the volume display. Setup menu “System” > “Display Settings” > “Volume” Settings dB The “dB” unit 0-97 The numeric value (0-97) Related links “Basic operation of the Setup menu” (p.191) 290 CONFIGURATIONS > Configuring various fu...

Setting the use of short messages on the TV Selects whether to display short messages on the TV when the unit is operated. Setup menu “System” > “Display Settings” > “Short Message” Settings Off Does not display short messages. On Displays short messages. Related links “Basic operation of the ...

Setting the position of short messages Sets the position of short messages on the TV screen. Setup menu “System” > “Display Settings” > “Short Message” > “Position” Settings Bottom Displays short messages at the bottom of the TV screen. Top Displays short messages at the top of the TV scree...

Setting the image to be used as wallpaper on the TV Selects the image to be used as wallpaper on the TV. Setup menu “System” > “Display Settings” > “Wallpaper” Settings Type 1-3 Related links “Basic operation of the Setup menu” (p.191) 293 CONFIGURATIONS > Configuring various functions (Set...

Setting the operation sound Selects whether to ring a sound when operating the touch key on the front panel. Setup menu “System” > “Touch Sound” Settings Off Does not output the operation sound. On Outputs the operation sound. NOTE This setting is interlocked with the setting of “Touch Sound” in ...

Specifying the condition for the TRIGGER OUT jack to function Specifies the condition for the TRIGGER OUT jack functions which make the external devices synchronizewith the unit. Setup menu “System” > “Trigger Output1”/“Trigger Output2” > “Trigger Mode” Settings Power Synchronizes transmitting...

Setting the amount of time for the auto-standby function Sets the amount of time for setting the unit to standby mode automatically. Setup menu “System” > “ECO” > “Auto Power Standby” Settings Off Does not set the unit to standby mode. 5 minutes, 20 minutes Sets the unit to standby mode when y...

Setting the use of the eco mode Reduces the unit’s power consumption by setting the eco mode. If this function is set to “On”, be sure torestart the unit. New setting becomes effective after a restart. Setup menu “System” > “ECO” > “ECO Mode” Settings Off Disables the eco mode. On Enables the ...

Preventing accidental changes to the settings Protects the settings to prevent accidental changes. Setup menu “System” > “Memory Guard” Settings Off Does not protect the settings. On Protects the settings. Change in the setting is prohibited until “Off” is selected. The lock icon ( o ) is display...

Restoring the default settings Restores the default settings for the unit (initialization). Setup menu “System” > “Initialization” Choices All Initialization Restores the default settings for the unit. Video Initialization Restores the default settings for video configurations. Network Initializa...

Backing up and restoring all the settings Informs the unit's setting to a USB flash drive and restores it to the unit. Prepare a USB flash drive usingFAT16 or FAT32 format in advance. Setup menu “System” > “Backup/Restore” Choices Backup Backups all the settings for the USB flash drive. Restore R...

Updating the firmware Updates the firmware. You can also check the firmware version and system ID. Setup menu “System” > “Firmware Update” Choices Network Update Updates the firmware via the network. USB Update Updates the firmware using a USB flash drive. NOTE ( “Network Update” is not selectabl...

Configuring the unit’s settings by operation of the bodyfront panel (Front Display menu) Basic operation of the Front Display menu Perform the following basic procedure to operate the “Front Display” menu. Operate this menu displayed onthe front display using the front panel. 1 Touch MENU (CONNECT) ...

Front Display menu items Use the following table to configure system settings of the unit. Item Page Dimmer 307 Zone Power 308 Settings Function Lock Volume Knob Lock 309 Input Selector Lock 310 Scene Key Lock 311 Touch Sound 312 Remote Sensor 313 Remote ID 314 Information Skip 315 Initialization 31...

Setting the power of each zone to on/standby Switches the power of the zone to be operated between on and off (standby). Front Display menu “Zone Power” > (zone) Settings Off Turns off the zone. On Turns on the zone. Related links “Basic operation of the Front Display menu” (p.305) 308 CONFIGURAT...

Setting the use of the volume on the front panel Selects whether to use the volume on the front panel. You can disable the volume operation on the unit toprevent the volume from being set unexpectedly loud by a child. Front Display menu “Settings” > “Function Lock” > “Volume Knob Lock” Setting...

Setting the use of the input selector on the front panel Selects whether to use SELECT/ENTER on the front panel as the input selector. Front Display menu “Settings” > “Function Lock” > “Input Selector Lock” Settings Off Enables the input selection operation of SELECT/ENTER on the unit. On Disa...

Setting the use of the scene key on the front panel Selects whether to use SCENE (4 numbers) on the front panel. Front Display menu “Settings” > “Function Lock” > “Scene Key Lock” Settings Off Enables the operation of SCENE on the unit. On Disables the operation of SCENE on the unit. Related l...

Setting the use of the operation sound Selects whether to ring a sound when operating the touch key on the front panel. Front Display menu “Settings” > “Touch Sound” Settings Off Does not output the operation sound. On Outputs the operation sound. NOTE This setting is interlocked with the setting...

Setting the use of the remote control Selects whether to use the remote control sensor on the front panel. Front Display menu “Settings” > “Remote Sensor” Settings Off Turns off the remote control sensor. On Turns on the remote control sensor. NOTE ( While the remote control sensor is turned off,...

Selecting the remote control ID Sets the unit’s remote control ID so that it matches the remote control’s ID. When using multiple Yamaha AVreceivers, set a unique remote control ID for its corresponding receiver. Front Display menu “Settings” > “Remote ID” Settings ID1, ID2 Changing the remote co...

Restoring the default settings Restores the default settings for the unit (initialization). Front Display menu “Settings” > “Initialization” Choices All Initialization Restores the default settings for the unit. Video Initialization Restores the default settings for video configurations. Network ...

Setting the use of Retail Demo Mode Selects whether to use Retail Demo Mode of the front display. In Retail Demo Mode, the feature of the unitand QR code are displayed on the front display. When you scan the QR code with your smartphone, you canread the introduction page of the unit. Front Display m...

UPDATE Updating the unit’s firmware Firmware updates New firmware that provides additional features or product improvements will be released as needed. Fordetails on firmware, visit the Yamaha website. The unit’s firmware can be updated via the network or using aUSB flash drive. n When the unit is c...

Updating the unit’s firmware via the network When the unit is connected to the Internet and a firmware update is ready, the following message appearsafter SETUP is pressed. Confirm the message and start the firmware update via the network. NOTICE ( Do not operate the unit or disconnect the power cab...

Updating the unit’s firmware using a USB flash drive If the unit is not connected to the Internet, or the Internet connection speed is slow, update the firmwareusing the USB flash drive. For details on downloads and firmware updates, visit the Yamaha website. NOTICE ( Do not operate the unit or disc...

TROUBLESHOOTING When any problem appears If trouble occurs, first check the following: Make sure of the following when the unit does not function properly. ( The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC walloutlets securely. ( The unit, subwoofer...

Power, system, or remote control trouble The power does not turn on ( The protection circuitry has been activated three times consecutively. If the standby indicator on the unit blinks when you try to turn on the power, it means that capability toturn on the power is disabled as a safety precaution....

The power does not turn on in synchronization with the TV ( HDMI Control on the unit is disabled. If turning off the unit is not synchronized to the TV either, check the setting of HDMI Control on the unit.For details on HDMI Control, see the following: ( “Setting the use of HDMI Control” (p.243) ( ...

The power does not turn off ( The internal microcomputer has frozen, due to an external electric shock (such as lightning orexcessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to reboot the unit. If the problem persi...

The power turns off (standby mode) immediately ( The unit was turned on while a speaker cable was shorted. Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers. For details, seethe following: ( “Connecting the speaker” (p.67) 328 TROUBLESHOOTING > When any prob...

The unit enters standby mode automatically ( The sleep timer worked. Turn on the unit and start playback again. ( The auto-standby function activated because the unit was not used for the specified time. To disable the auto-standby function, set “Auto Power Standby” in the “Setup” menu to “Off”. For...

The unit is not reacting ( The internal microcomputer is frozen, due to an external electric shock (such as lightning orexcessive static electricity) or to a drop in the power supply voltage. Hold down z (power) on the front panel for more than 15 seconds to reboot the unit. If the problem persists,...

The unit cannot be controlled using the remote control ( The unit is out of the operating range. Use the remote control within the operating range. For details, see the following: ( “Operating range of the remote control” (p.15) ( The batteries are weak. Replace with new batteries. ( The unit’s remo...

Cannot select the desired input source even if “INPUT” is pressed ( The function which skips some input sources is set. Set “Input Skip” of the desired input source in the “Setup” menu to “Off”. For details, see the following: ( “Setting input sources to be skipped when operating the INPUT key” (p.2...

The front display is turned off ( The brightness of the front display is set to be turned off. Set “Dimmer” in the “Front Display” menu or “Setup” menu to bigger than “-5”. For details, see thefollowing: ( “Adjusting the brightness of the front display” (p.289) 334 TROUBLESHOOTING > When any prob...

Audio trouble No sound ( Another input source is selected. Select an appropriate input source with the input selection keys. For details, see the following: ( “Basic procedure for playing back video and music” (p.129) ( Signals that the unit cannot reproduce are being input. Some digital audio forma...

The volume cannot be increased ( The maximum volume is set too low. Use “Max Volume” in the “Setup” menu to adjust the maximum volume. For details, see the following: ( “Setting the limit value of the volume” (p.229) ( A device connected to the output jacks of the unit is not turned on. Turn on all ...

No sound is coming from a specific speaker ( The playback source does not contain a signal for the channel. To check it, display information about the current audio signal on the TV. For details, see the following: ( “Checking the audio signal information” (p.217) ( The currently selected sound prog...

No sound is coming from the subwoofer ( The playback source does not contain Low Frequency Effect (LFE) or low-frequency signals. To check it, set “Extra Bass” in the “Option” menu to “On”, in order to output the front channel low-frequency components from the subwoofer. For details, see the followi...

No sound from the playback device when HDMI Control is used ( The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the playback device audio is output from thespeakers connected to the unit. ( TV audio is selected as the input source. Select an appro...

No sound from the TV when HDMI Control is used ( The TV is set to output audio from the TV speakers. Change the audio output setting on your TV so that the TV audio is output from the speakers connectedto the unit. ( A TV that does not support eARC/ARC is connected to the unit only with an HDMI cabl...

Only the front speakers work on multichannel audio ( The currently selected sound program is “2ch Stereo”. Select the sound program other than “2ch Stereo”. For details, see the following: ( “Enjoying sound field effects optimized for the type of content” (p.113) 343 TROUBLESHOOTING > When any pr...

The sound is distorted ( A device (such as an external power amplifier) connected to the unit’s audio output jacks is notturned on. Turn on all devices connected to the unit’s audio output jacks. ( The volume of the unit is too high. Turn down the volume. If “ECO Mode” in the “Setup” menu is set to ...

Video trouble No video ( Another input source is selected on the unit. Select an appropriate input source with the input selection keys. ( Another input source is selected on the TV. Switch the TV input to display the video from the unit. ( The video signal output from the unit is not supported by t...

The “Option” menu or “Setup” menu is not displayed on the TV ( Another input source is selected on the TV. Switch the TV input to display the video from the unit (HDMI OUT jack). ( The Pure Direct is enabled. Press PURE DIRECT to disable the Pure Direct. For details, see the following: ( “Enjoying h...

The video is interrupted ( If you are using two TVs in the Main zone, another TV is turned off when “HDMI OUT ” is selected. Select “HDMI OUT ” or “HDMI OUT ” to output the signals only to the TV you are using. For details on selecting HDMI output, see the following: ( “Selecting an HDMI output jack...

FM/AM radio trouble FM radio reception is weak or noisy ( There is multi-path interference. Adjust the FM antenna height or orientation, or place it in a different location. ( Your area is too far from the FM station transmitter. Press MODE on the remote control to select monaural FM radio reception...

AM radio reception is weak or noisy ( The noises may be caused by fluorescent lamps, motors, thermostats, or other electricalequipment. It is difficult to completely eliminate noise. It may be reduced by using an outdoor AM antenna. 352 TROUBLESHOOTING > When any problem appears

Radio stations cannot be selected automatically ( Your area is too far from the FM station transmitter. Select the station manually. Or use an outdoor antenna. We recommend using a sensitive multi-elementantenna. For details on selecting the station manually, see the following: ( “Listening to the r...

AM radio stations cannot be registered as presets ( Auto Preset has been used. Auto Preset is for registering FM radio stations only. Register AM radio stations manually. For details, seethe following: ( “Registering a radio station manually” (p.141) 354 TROUBLESHOOTING > When any problem appears

Radio stations cannot be selected by pressing PRESET ( No radio stations are registered. When no radio stations are registered, “No Presets” appears on the front display by pressing PRESET.Register the radio station to the preset number. For details, see the following: ( “Registering a radio station...

DAB radio trouble No DAB radio reception ( An initial scan has not been performed. Perform an initial scan to receive DAB radio. For details, see the following: ( “Preparing the DAB tuning” (p.136) 356 TROUBLESHOOTING > When any problem appears

No DAB radio reception even after performing an initial scan ( Reception strength of DAB radio is poor. Check reception strength in Tune AID displayed on the front panel, and adjust the antenna height ororientation, or place it in a different location. For details, see the following: ( “Preparing th...

DAB radio reception is weak or noisy ( There is multi-path interference. Check reception strength in Tune AID displayed on the front panel, and adjust the antenna height ororientation, or place it in a different location. For details, see the following: ( “Preparing the DAB tuning” (p.136) ( Your ar...

DAB information is not available or is inaccurate ( The selected DAB radio station may be temporarily out of service or may not provide information. Contact the DAB broadcaster. 359 TROUBLESHOOTING > When any problem appears

No DAB radio sound ( The selected DAB radio station may be temporarily out of service. Try the station later or select another station. 360 TROUBLESHOOTING > When any problem appears

USB trouble The unit does not detect the USB flash drive ( The USB flash drive is not connected to the USB jack securely. Turn off the unit, reconnect your USB flash drive, and turn the unit on again. ( The file system of the USB flash drive is not FAT16 or FAT32. Use a USB flash drive with FAT16 or...

Folders and files in the USB flash drive cannot be viewed. ( The data in the USB flash drive is protected by the encryption. Use a USB flash drive without an encryption function. 362 TROUBLESHOOTING > When any problem appears

Network trouble The network feature does not function ( The network parameters (IP address) have not been obtained properly. Enable the DHCP server function on your router and set “DHCP” in the “Setup” menu to “On” on the unit.For details, see the following: ( “Setting the network parameters automat...

Wireless network is not found ( Microwave ovens or other wireless devices in your neighborhood might disturb the wirelesscommunication. Turn off these devices or move the unit and the wireless router (access point) away from them. If yourwireless router supports 5 GHz band, establish a new connectio...

The Internet radio cannot be played ( The unit is not connected to the Internet. To use an Internet radio station, the unit must be connected to the Internet. Check whether the networkparameters (such as the IP address) are properly assigned to the unit. For details, see the following: ( “Checking t...

The iPhone does not recognize the unit when using AirPlay ( The unit is connected to a multiple SSID router. Access to the unit might be restricted by the network separation function on the router. Connect theiPhone to the SSID which can access the unit. (Connect it to the Primary SSID at the top of...

Unable to play back music with AirPlay ( The unit cannot play back the songs stored on the iPhone. Check the song data. If it cannot be played on the iPhone itself, the song data or storage area may bebroken. 373 TROUBLESHOOTING > When any problem appears

The application for mobile devices does not detect the unit ( The unit and mobile device are not in the same network. Check the network connections and your router settings, and then connect the unit and mobile device tothe same network. ( The unit is connected to a multiple SSID router. Access to t...

Firmware update via the network is failed ( It may not be possible depending on the condition of the network. Update the firmware via the network again or use a USB flash drive. For details, see the following: ( “Updating the firmware” (p.304) 375 TROUBLESHOOTING > When any problem appears

Bluetooth® trouble A Bluetooth® connection cannot be established ( The wireless antennas on the rear panel of the unit does not stand upright. Stand the wireless antennas upright for connecting to a Bluetooth device wirelessly. ( The Bluetooth function of the unit is disabled. Enable the Bluetooth f...

Error indications on the front display Error indications on the front display Refer to the following table when the error message is indicated on the front display. Message Cause Remedy Check SPWires The speaker cables are short circuited. Twist the bare wires of the cables firmly and connect to the...

APPENDIX Care and cleaning Care for the front panel The way of care for the front panel is as follows. ( Wipe the front panel with a soft dry cloth. Do not wipe the surface hard.Failure to observe this may cause damage to the surface. ( Before you clean the front panel, be sure to turn off (standby)...

Connecting to a network wirelessly Selecting a wireless network connection method Select a wireless connection method according to your network environment. 1 Press SETUP. 2 Select “Network”. 3 Select “Network Connection”. 4 Select “Wireless(Wi-Fi)”. The following connection methods are available. (...

Setting up a wireless connection using the WPS button You can easily set up a wireless connection with one push of the WPS button on the wireless router. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 Select “WPS Button”. 2 According to the on-screen guidance, connect to the...

Setting up a wireless connection using an iPhone You can set up a wireless connection by applying the connection settings on iPhone. Before proceeding, confirm that your iPhone is connected to a wireless router. NOTE You need iPhone with iOS 7 or later. Setup menu “Network” > “Network Connection”...

Setting up a wireless connection by selecting from the list ofavailable access points You can set up a wireless connection by selecting an access point from the list of wireless LAN routers foundby the unit. You need to manually enter the security key. Setup menu “Network” > “Network Connection” ...

Setting up a wireless connection manually You can set up a wireless connection by entering the required information manually. You need to set up theSSID (network name), encryption method and security key for your network. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)” 1 Select...

Setting up a wireless connection using the WPS PIN code You can set up a wireless connection by entering the unit’s PIN code into the wireless router. The method isavailable if the wireless router supports the WPS PIN code method. Setup menu “Network” > “Network Connection” > “Wireless(Wi-Fi)”...

Using front presence speakers Front presence speaker layout The following three layout patterns are available for the front presence speakers. Choose a layout patternthat suits your listening environment. ( Front Height ( Overhead ( Dolby Enabled SP NOTE ( You can enjoy Dolby Atmos, DTS:X or CINEMA ...

Installing the front presence speakers in Overhead position Install the front presence speakers to the ceiling above the listening position (Overhead). It delivers realistic overhead sound effects and sound field with excellent linkage of front and rear soundspaces effectively. CAUTION ( Be sure to ...

Using Dolby Enabled speakers as the front presence speakers Use Dolby Enabled speakers as the front presence speakers. This utilizes sound reflected from ceiling and lets you enjoy overhead sound only from speakers that areplaced at the same level as traditional speakers. For details, refer to the i...

Supported devices and file formats Supported Bluetooth® devices The following Bluetooth devices can be used by the unit. ( Bluetooth devices that support A2DP can be used. ( Operation of all Bluetooth devices cannot be guaranteed. 390 APPENDIX > Supported devices and file formats

Supported USB devices The following USB devices can be used by the unit. ( This unit is compatible with USB memory devices that are in FAT16 or FAT32 format.Do not connect any other type of USB devices. ( USB devices with encryption cannot be used. ( Operation of all USB devices cannot be guaranteed...

Supported file formats The following file formats can be used by the unit. File Samplingfrequency (kHz) Quantization bits(bit) Bitrate (kbps) Number ofchannels Support forgapless playback WAV * 32/44.1/48/ 88.2/96/176.4/ 192/352.8/384 16/24/32 - 2 ) MP3 32/44.1/48 - 8 to 320 2 - WMA 32/44.1/48 - 8 t...

Zone output Multi-zone output Multi-zone output is shown as follows. Input Output Using the unit’s internal amplifier Using an external amplifier EXTRA SP 1-2 jacks ZONE OUT jacks HDMI OUT 3 (ZONE OUT) jack Zone2 Zone2 Zone2 Digital audio (HDMI) m (*2) m (*2) m (*4) Digital audio (COAXIAL/OPTICAL) m...

Trademarks Trademarks The trademarks used in this manual are as follows. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 20...

Specifications Specifications The specifications of this unit are as follows. Input jacks Analog Audio ( Audio x 4 (including PHONO) Digital Audio ( Optical x 2 (Supported frequencies: 32 kHz to 96 kHz) ( Coaxial x 1 (Supported frequencies: 32 kHz to 192 kHz) HDMI Input ( HDMI x 7 Other jacks ( USB ...

Video Format (Repeater Mode) ( VGA ( 480i/60 Hz ( 576i/50 Hz ( 480p/60 Hz ( 576p/50 Hz ( 720p/60 Hz, 50 Hz ( 1080i/60 Hz, 50 Hz ( 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz ( 4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz Audio Format ( Dolby Atmos ( Dolby TrueHD ( Dolby Digital Plus ( Dolby Digital ( DTS:X ( DT...

Post Decoding Format ( Dolby Surround ( Neural:X Audio Section Rated Power Output (2-channel driven) ( (20 Hz to 20 kHz, 0.06% THD, 8 Ω) ( Front L/R, Surround L/R, Surround Back L/R 110 W/ch ( Center 110 W ( (1 kHz, 0.9% THD, 8 Ω) ( Front L/R, Surround L/R, Surround Back L/R 120 W/ch ( Center 120 W ...

Tone Control Characteristics ( Main Zone ( Bass Boost/Cut ±6 dB/0.5 dB Step at 50 Hz ( Bass Turnover 350 Hz ( Treble Boost/Cut ±6 dB/0.5 dB Step at 20 kHz ( Treble Turnover 3.5 kHz ( Zone2 ( Bass Boost/Cut ±6 dB/0.5 dB Step at 50 Hz ( Bass Turnover 350 Hz ( Treble Boost/Cut ±6 dB/0.5 dB Step at 20 k...

DAB Section (U.K., Europe, Russia and Australia models) Tuning Range 174.928 MHz to 239.200 MHz (Band III) Support Audio Format MPEG 1 Layer II/MPEG-4 HE-AAC v2 (aacPlus v2) Antenna 75 Ω unbalanced General Power Supply ( [U.S.A. and Canada models] AC 120 V, 60 Hz ( [Taiwan, Brazil and Central and So...

Default settings of the Setup menu The default settings of the “Setup” menu are as follows. Speaker Setting Pattern Pattern1 Setting Data Copy - Power Amp Assign Basic Configuration ( Front Small ( Center Small ( Surround Small ( Layout Rear ( Surround Back Small ( Front Presence Small ( Layout Fron...

DSP Parameter - All-Channel Stereo ( Level 0 ( Front / Rear Balance 0 ( Left / Right Balance 0 ( Height Balance 5 ( Monaural Mix Off Dynamic Range Maximum Volume ( Max Volume +16.5 dB ( Initial Volume Off Pure Direct Mode Auto Adaptive DSP Level On Virtual Speaker ( VPS On ( VSBS On ( Dolby Speaker ...

Default settings of the Front Display menu The default settings of the “Front Display” menu are as follows. Dimmer -2 Zone Power Off Settings ( Function Lock ( Volume Knob Lock Off ( Input Selector Lock Off ( Scene Key Lock Off ( Touch Sound On ( Remote Sensor On ( Remote ID ID1 ( Information Skip O...