Yamaha 2.0 User Manual - Free PDF Download

Page 2 - CONTENTS

2/34 CONTENTS PM5D & DME64N CASCADE ................................................ 3 Mode 1: Remote Control & Bi-directional Audio ............................ 3 Cascade Setup .............................................................................4 Patching .............................

Page 3 - PM5D & DME64N CASCADE; CASCADE IN

3/34 PM5D & DME64N CASCADE Mode 1: Remote Control & Bi-directional Audio This uses the CASCADE IN/OUT ports, but is not a Cascade function. (MIX buses are not merged: you use the PATCH function to choose the required audio connections.) Advantages: Use DME for inserting extra GEQs, PEQs...Us...

Page 4 - Cascade Setup

4/34 On MIXER SETUP screen (SYS/W.CLOCK function), select: Whichever slots you choose here will be disabled from normal use.So this connection method limits the amount of slot I/O you can practically use.If the Cascade function is ENABLED, then the audio input to these slots will be merged with the ...

Page 5 - Patching

5/34 In the PATCH screens, instead of seeing the slots selected in Cascade Setup procedure, the 32 cascade connections will be seen (yellow colour).So any audio channel inside PM5D can be patched to any cascade channel for sending to and from DME64N.Patch the DME like an external GEQ, effect unit or...

Page 6 - Control and Monitoring

6/34 This indicator will appear. Press to activate the DME monitor in the PM5D CUE bus. Choose the name of the component to be edited here. In the DME CONTROL-SETUP screen, click ‘CONNECT’ and select the type of component to be edited here. DME scenes can be recalled from here. And scenes can be sto...

Page 7 - Scene Recall MIDI Link

7/34 The SCENE RECALL LINK switch in the DME CONTROL-SETUP screen will enable PM5D to send a MIDI message through the cascade connection to recall a scene in the DME, following the Program Change table assignments. You need to switch on PROGRAM CHANGE Tx. (It doesn’t matter about the MIDI PORT selec...

Page 8 - CONTROL

8/34 Mode 2: Remote Control & One-way Audio: PM5D to DME64N This uses only the CASCADE OUT port of PM5D and the CASCADE IN port of DME64N, but is not a Cascade function. (MIX buses are not merged: you use the PATCH function to choose the required audio connections.) Advantages: Use DME for extra...

Page 12 - CASCADE OUT

12/34 Mode 3: One-way Audio Cascade: PM5D to DME64N This uses the Cascade function, from the CASCADE OUT port of PM5D to the CASCADE IN port of DME64N. (PM5D MIX buses are sent to the DME cascade buses.) Advantages: Use DME for larger matrix.Use DME for extra output processing GEQs, crossovers, dela...

Page 15 - MIDI Link

15/34 The SCENE RECALL LINK will not work in this connection mode.Regular MIDI Control Change and Program Change messages can be exchanged through a separate MIDI cable, but it takes some time to set up. This example shows a PM5D MIDI REMOTE layer set up to control some matrix parameters in DME64N, ...

Page 16 - Mode 4: Audio from DME64N to PM5D

16/34 Mode 4: Audio from DME64N to PM5D This uses the CASCADE IN port of PM5D, but is not a Cascade function. (MIX buses are not merged: you use the PATCH function to choose the required audio connections.) NOTE: It is not possible to use the Cascade function for combining DME cascade output with th...

Page 22 - SERIAL ASSIGNMENT (using the switches on the card’s circuit board):

22/34 PM5D & DME64N with MY16-C/MY16-CII / Remote Control & Bi-directional Audio (Using MY16-C/MY16-CII) ■ MY16-C Setup Example of how to configure MY16-C (for peer-to-peer connection): BUNDLE ASSIGNMENT (using the switches on the card’s panel): SERIAL ASSIGNMENT (using the switches on the c...

Page 32 - Uni-directional Audio Cascade: DM2000 to DME64N

32/34 DM2000 & DME64N CASCADE Uni-directional Audio Cascade: DM2000 to DME64N The DM2000 CASCADE OUT port can be used to send audio from the output buses to DME64N. DME64N cannot be controlled from DM2000. This can be a convenient connection for audio only, and it does not use up any of the MY-c...

Page 35 - Revision History; Cascade Setup Guide; Version; First edition released.

Revision History Cascade Setup Guide Month / Year Version Contents March 2006 1.0 First edition released. July 2007 2.0 "MY16-CII Setup" on pages 23 and 29 added.