Yamaha NX-U10 - Manual - manualsarea.com

Page 2 - En; IMPORTANT SAFETY INSTRUCTIONS; Read these instructions.

i En IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instruc...

Page 3 - ii; English; This product has been tested and found to

ii En English We Want You Listening For A Lifetime Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – ...

Page 4 - iii; Thank you for selecting this Yamaha product.; CAUTION: Read this before operating your unit.; WARNING; CONTENTS

iii En Thank you for selecting this Yamaha product. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.1 Install this unit in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture,...

Page 5 - Real stereo sound; Please check that you received all of the following parts.; FEATURES

1 En English ◆ 3 way power supply You can choose one of three power supplies according to your usage circumstances: USB bus power, USB/AC adaptor or batteries. ◆ Digital sound reproduction The USB connection provides clear sound with little noise. ◆ Real stereo sound The high quality amplifier, tita...

Page 6 - CONNECTIONS; Notes; When using USB bus power; Note

2 En Use the procedure below to choose one of the three power supplies according to your usage circumstances. 1 When using USB bus power (this page) 2 When using the USB/AC adaptor (page 4) 3 When using batteries (page 5) • Before connecting, make sure that POWER switch on this unit is turned off.• ...

Page 7 - Installation of USB drivers; Common operations

3 En English ■ Installation of USB drivers The installation procedure is variable depending on OS. After “Common operations” below, follow the installation procedure for your OS.• You may need the CD-ROM of the OS running on your computer to install the device drivers. For details, refer to the manu...

Page 8 - When using the USB/AC adaptor

4 En When the inserted Windows 98SE CD-ROM is not recognized Even when the CD-ROM is inserted, your computer may display an error message if it cannot find the location of the CD-ROM drive. In this case, it is required to specify the location manually. If this error occurs during installation of USB...

Page 9 - When removing the battery holder; When using batteries

5 En English y You cannot insert the battery holder into this unit when connecting the USB plug. Unplug the USB cable from this unit before inserting the battery holder. 1 Insert 4 commercially available AAA, R03, UM-4 batteries (alkaline or nickel-hydride batteries) into the battery holder. Make su...

Page 10 - About the non-skid pad; USING THIS UNIT

6 En 1 Press POWER to turn this unit on. (The status indicator (LED) lights up.) 2 Start playback of your computer’s media player or your portable audio player. 3 Adjust the volume level using VOLUME on this unit. Do not unplug the USB cable from your computer during playback. Doing so may cause you...

Page 11 - Speaker section; Magnetic shielding type; Amplifier section; ΤΗ; USB section; or Macintosh operating system is installed.; General; Battery life: 3 hours as alkaline; TROUBLESHOOTING; SPECIFICATIONS

7 En English If the problem you are experiencing is not listed below, set this unit to off, disconnect the power, and contact the nearest authorized Yamaha dealer or service center. General When using the USB bus power The limiter is activated temporarily to decrease the volume output when there is ...

Yamaha NX-U10 - Manual

Table of Contents:

Summary

Other Yamaha Models