Yamaha MY8-AT - Manual
This user manual covers Yamaha’s range of high-performance digital audio interface cards, designed for professional audio equipment. The instructions emphasize critical safety protocols–such as proper grounding, static protection, and avoiding electrical hazards–to prevent damage or accidents during installation. Key topics include detailed specifications for analog and digital I/O cards (e.g., MY4-DA, MY8-AE96), gain settings, connector configurations, and compliance standards like FCC/EU regulations to ensure reliable operation in studio environments.
Table of Contents:
- Page 1 – Safety Precautions for Installing Digital I/O Cards
- Page 2 – Installation Safety Guidelines for Circuit Boards
- Page 3 – I/O Card Installation Safety and Handling
- Page 4 – MY4-DA and MY4-AD Card Specifications
- Page 5 – MY8-AD24 and MY8-AE Card Descriptions
- Page 6 – MY8 Digital I/O Card Functions and Configurations
- Page 7 – MY8 Analog Input and Digital I/O Card Specifications
- Page 8 – MY8-AE96S Specifications and Compliance
– 1 –
Digital I/O cards
for
digital audio equipment
DA CARD
MY4-DA
AD CARD
MY4-AD
MY8-AD24
DIGITAL I/O CARD (AES/EBU)
MY8-AE
DIGITAL I/O CARD (ADAT)
MY8-AT
DIGITAL I/O CARD (TDIF-1)
MY8-TD
Safety Information
WARNING
Failure to observe the following warnings may lead to fatality or serious injury from fire or electric shock.
Before installing the card, you must refer to the owner’s manual of the host device or to the Yamaha website to verify that your host
device supports this card, and to verify the number of cards that can be installed in combination with other Yamaha or third-party cards.
Yamaha website: http://www.yamaha.co.jp/product/proaudio/homeenglish/
If one or more cards in a combination not endorsed by Yamaha are installed in a Yamaha device, electrical shock, fire, or
malfunction may occur.
•
Do not attempt to disassemble or modify the card. Do not apply excessive force to board connectors or other board components.
(Mishandling of board may lead to shock, fire hazard, or equipment failure.)
•
Be sure to disconnect the power cable from the main unit before installing this card (to eliminate shock hazard).
CAUTION
Failure to observe the following precautions may lead to personal injury, or may result in damage to equipment or
other property.
•
Do not touch the board’s metallic leads (pins) when handling the card. (Pins are sharp and may cause hand cuts.)
•
The card is electrostatic-sensitive. Before handling the card, you should briefly touch the main unit’s metal casing with your bare
hand so as to drain off any static charge from your body.
Yamaha assumes no responsibility for data loss, equipment damage, or injury caused by inappropriate handling or usage.
Information de sécurité
ATTENTION
Le non respect des avertissements suivants peut entraîner de sérieuses blessures, par suite d’un incendie ou d’une
électrocution, voire la mort.
Avant d’installer la carte, veuillez consulter le mode d’emploi du dispositif hôte ou le site web Yamaha pour vous assurer que votre
dispositif permet l’utilisation de cette carte, voire de vérifier le nombre de cartes pouvant être installées avec d’autres cartes produites
par Yamaha ou d’autres fabricants.
Page Web Yamaha: http://www.yamaha.co.jp/product/proaudio/homeenglish/
L’installation d’une ou de plusieurs cartes non recommandées par Yamaha dans un dispositif Yamaha peut provoquer une
électrocution, un incendie ou des dysfonctionnements.
•
N’essayez pas de démonter ou de modifier la carte. N’appuyez pas avec force sur les connecteurs ou d’autres composants de la
carte. (Malmener la carte peut entraîner une électrocution, un incendie ou une défaillance de l’équipement.)
•
Prenez soin de débrancher le câble d’alimentation au niveau de l’unité principale avant d’installer cette carte afin d’éliminer les
risques d’électrocution.
PRECAUTION
Le non respect des avertissements suivants peut entraîner des blessures personnelles ou provoquer des dégâts à
l’équipement ou à d’autres biens.
•
Ne touchez pas les conducteurs (broches) métalliques de la carte lorsque vous manipulez celle-ci. (Les broches sont aiguës et vous
pourriez vous couper les doigts.)
•
La carte est sensible à l’électricité statique. Avant de la toucher, vous devez brièvement toucher le boîtier métallique de l’unité
principale mains nues afin d’éliminer toute électricité statique, accumulée dans votre corps.
Yamaha n’assume aucune responsabilité pour des pertes de données, dégâts aux équipements ou blessures, résultant
d’un maniement et/ou d’une utilisation inadéquats.
– Cards conforming to the 96 kHz standard –
DA CARD
MY8-DA96
AD CARD
MY8-AD96
DIGITAL I/O CARD (AES/EBU)
MY8-AE96
MY8-AE96S
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Yamaha
- Model
- MY8-AT
- Document type
- Manual
- Language(s)
- German, English, Spanish, French
- Pages
- 8
- File size
- 131.2 KB
- Format
Summary
Safety warnings and precautions for installing Digital I/O cards, listing compatible models, and emphasizing risks of electrical shock, fire, or equipment damage.
Safety instructions for installing circuit boards, warnings against electric shock and fire, guidelines on handling components, and liability limitations regarding data loss.
Safety precautions for inserting I/O cards, methods for ensuring proper grounding via screws, avoiding static electricity, and general handling warnings.