Page 2 - PLEASE KEEP THIS MANUAL; SPECIAL MESSAGE SECTION
PLEASE KEEP THIS MANUAL This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recom-mended by Yamaha. WARNING: Do not place this product in a positio...
Page 3 - English; PRECAUTIONS; PLEASE READ CAREFULLY BEFORE PROCEEDING; * Please keep this manual in a safe place for future reference.; WARNING
English 3 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or ot...
Page 4 - Insert the tool between the rubber stopper
English 4 • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise ...
Page 5 - Introduction; About the included CD-ROM
English 5 Introduction Thank you for purchasing the Yamaha i88X Audio/MIDI Interface.Connecting the i88X to a computer expands music production environments that utilize an audio sequencer on the computer. The i88X supports mLAN, a digital music network based on the IEEE1394 high performance serial ...
Page 6 - Features; Fast data transfer via mLAN; Direct Monitoring Function; Table of Contents
English 6 Features ■ Fast data transfer via mLAN Connecting the i88X to a computer and other mLAN devices via IEEE1394 (FireWire/i.LINK) cables enables you to transfer multi-channel audio data and multi-port MIDI signals to and from a com-puter-based DAW (Digital Audio Workstation) and connected mLA...
Page 7 - Fundamentals of mLAN; Connect the computer and mLAN devices using the IEEE1394 cables.; DAW, audio sequencer and connected devices.
English 7 Fundamentals of mLAN mLAN is a digital network for music that was developed based on IEEE1394, an industry-standard high-performance data communications protocol.Digital music environments that do not feature mLAN require dozens of cables for various devices and purposes, including MIDI ca...
Page 8 - Names and Functions; Front Panel
English 8 Names and Functions Numbers indicated to the left of the names ( 1 - 5 , 7 - A , E - K , and M ) correspond the numbers indicated in the block diagram on back cover page. Front Panel 1 [PHANTOM +48V] switch This switch supplies +48 V phantom power to XLR and TRS phone compatible INPUT jack...
Page 9 - MASTER PHONES jack; MASTER CLOCK indicators
English 9 4 [PEAK] indicators A [PEAK] indicator lights up red if the input sig-nal that has passed through the [GAIN] control ( 5 ) reaches a level 3 dB below the clipping point. In order to record at the optimal level, adjust the [GAIN] control ( 5 ) so that this indi- cator flickers briefly when ...
Page 10 - When the wordclock master in an mLAN; When the i88X is referencing the incom-; When the i88X is not receiving the cor-
English 10 wordclock master” on page 10. You can select the sampling frequency using mLAN Auto Con-nector or mLAN Graphic Patchbay (page 20). INT: The i88X uses the internal clock at 44.1 kHz. ADAT: The i88X uses the incoming ADAT sig-nal as the master clock. mLAN: The i88X uses the incoming mLAN si...
Page 11 - OPTICAL IN & OUT jacks; DC IN terminal
English 11 Rear Panel E INSERT I/O 1 & 2 (TRS phone) jacks These unbalanced TRS phone-type 1/4" connec-tors are used for channel insert ins and outs. Use a split cable to insert an external effects proces-sor to INPUT 1 & 2 ( 3 ) on the front panel. INSERT I/O 1 corresponds to INPUT 1, a...
Page 13 - Connecting External Devices
English 13 Connecting External Devices Before you connect external devices to the i88X, turn off the power to all devices. Also, before you turn on or off the power to the devices, lower the volume setting on all connected devices to minimum. Otherwise, electrical shock or damage to the devices may ...
Page 14 - Wordclocks; device as the wordclock master.
English 14 For information on system requirements and settings for making mLAN connections, refer to the separate Installation Guide and mLAN Graphic Patchbay Online Manual. Wordclocks In a system that features multiple digitally-connected devices, all digital devices must be synchro-nized when digi...
Page 15 - High-pitched buzzing or whirring operation noise in the computer; Recommended Cables; Changing the power source for each device.
English 15 About connections with external devices when using the i88X with a computer When using audio devices, musical instruments and computers at the same time, there is bound to be some noise in the system, the amount of which depends on the connections. Knowing how to minimize noise is extreme...
Page 16 - ments and microphones.
English 16 Connecting Musical Instruments and Microphones and Adjusting the Input Level Signals input at INPUT 1-8 jacks are routed to mLAN output channels 1-8 respectively. If you have selected any pair from channels 1/2 through 7/8 for monitor output, you can monitor the corre-sponding input signa...
Page 17 - Direct Monitoring
English 17 Direct Monitoring Through the MASTER L & R jacks and the MASTER PHONES jack, you can directly monitor signals input at INPUT 1-8 jacks or COAXIAL or OPTICAL DIGITAL STEREO INPUT jacks.When an audio input signal, such as a guitar or vocal signal, is output through the computer, latency...
Page 18 - System Examples; Connecting the i88X to the computer
English 18 System Examples 1. Connecting the i88X to the computer Connect the IEEE1394 connector on an IEEE1394-compatible computer to the mLAN connector on the i88X using an IEEE1394 cable. In mLAN Auto Connector or mLAN Graphic Patchbay (page 20), route the audio and MIDI signals between the compu...
Page 19 - Using multiple mLAN devices
English 19 2. Using multiple mLAN devices Connect the mLAN (IEEE1394) connector on the IEEE1394-compatible computer and the mLAN (IEEE1394) connector on the 01X Digital Mixing Studio and on the i88X using IEEE1394 cables. In mLAN Graphic Patchbay (refer to the mLAN Graphic Patchbay Online Manual), r...
Page 20 - Making mLAN Connections; mLAN Auto Connector
English 20 Making mLAN Connections In an mLAN system, you can easily configure and maintain the system, connect or disconnect the mLAN connectors on the computer and each mLAN device (virtual audio /MIDI input and output connectors), and make various mLAN connection settings (such as synchronization...
Page 21 - LED Indicators
English 21 LED Indicators When you press and hold down the [SELECT] switch for one second or longer, the MONI-TOR/Sampling Rate indicator for the current operating sampling frequency (44k, 48k, 88k, or 96k) flashes red. Indicators Status Meaning ACTIVE Steady blue The i88X is operating normally as a...
Page 22 - Troubleshooting; No sound or very low volume level
English 22 Troubleshooting If you encounter a problem... If you hear no sound or a strange sound, first check the items described below and take appropriate action. If the problem persists, consult your Yamaha dealer. ■ No sound or very low volume level • Are speakers or headphones connected correct...
Page 23 - Insufficient tracks for recording or playback; Unable to communicate via mLAN
English 23 • Do not run applications, such as anti-virus software, in the background. While using the mLAN system, turn off all applications that run in background. If these applications remain on, driver operation may become unstable and cause noise. If you do not plan to use the mLAN system, you c...
Page 25 - Specifications; General Specifications
English 25 To change mLAN settings, select [Start | (All) Programs | Start Up], then start mLAN Manager. - (When a message such as “file cannot be found” appears when uninstalling:) Try executing the installation once more, then uninstall again. ■ (Windows) mLAN Manager (the mLAN icon in the task ba...
Page 26 - Control; Others
English 26 *1: Signal input from ADAT-compatible device: Normal Rate Fs 44.1KHz(–6%) to 48KHz(+6%) Double Rate Fs 88.2KHz(–6%) to 96KHz(+6%) *2: Always balanced, regardless of whether a XLR-3-31 or TRS phone is used. (1=GND, 2=HOT, 3=COLD/Tip=HOT, Ring=COLD, Sleeve=GND) *3: Balanced Phone (Tip=HOT, ...
Page 27 - Deutsch; VORSICHTSMASSNAHMEN; BITTE SORGFÄLTIG DURCHLESEN, EHE SIE WEITERMACHEN; WARNUNG
Deutsch 3 VORSICHTSMASSNAHMEN BITTE SORGFÄLTIG DURCHLESEN, EHE SIE WEITERMACHEN * Heben Sie diese Anleitung sorgfältig auf, damit Sie später einmal nachschlagen können. WARNUNG Befolgen Sie unbedingt die nachfolgend beschriebenen grundlegenden Vorsichtsmaßnahmen, um die Gefahr einer schwer wiegenden...
Page 28 - seite nach oben zeigt.
Deutsch 4 • Ehe Sie das Instrument an andere elektronische Komponenten anschließen, schalten Sie die Stromversorgung aller Geräte aus. Ehe Sie die Stromversorgung für alle Komponenten an- oder ausschalten, stellen Sie bitte alle Lautstärkepegel auf die kleinste Lautstärke ein. Auch immer sicherstell...
Page 29 - Einführung; Informationen zur beiliegenden CD-ROM
Deutsch 5 Einführung Vielen Dank für den Kauf des Audio/MIDI Interface i88X von Yamaha.Durch Anschluss des i88X an einen Computer können Sie Ihre Musikproduktionsumgebung erweitern, wenn Sie einen Audiosequenzer auf dem Computer benutzen. Das i88X unterstützt mLAN, ein digitales Netzwerk für Musikda...
Page 30 - Leistungsmerkmale; Schnelle Datenübertragung über mLAN; Inhaltsverzeichnis
Deutsch 6 Leistungsmerkmale ■ Schnelle Datenübertragung über mLAN Wenn Sie das i88X über IEEE-1394- (FireWire/i.LINK)-Kabel mit einem Computer und anderen mLAN-Geräten verbinden, können Sie Audiodaten und MIDI-Signale auf mehreren Kanälen zu und von einer computergestützten DAW (Digital Audio Workst...
Page 31 - Grundlagen zu mLAN
Deutsch 7 Grundlagen zu mLAN mLAN ist ein digitales Netzwerk für Musik, die auf der Basis von IEEE 1394 aufgebaut wurde, einem Industriestandard-Protokoll für Hochgeschwindigkeits-Datenübertragung.Digital-Music-Umgebungen ohne mLAN erfordern Dutzende von Kabeln für verschiedene Geräte und Zwecke, ei...
Page 32 - Bezeichnungen und Funktionen; Vorderes Bedienfeld
Deutsch 8 Bezeichnungen und Funktionen Die links von den Namen angegebenen Zahlen ( 1 - 5 , 7 - A , E - K , und M ) entsprechen den im Blockdiagramm angegebenen Zahlen auf des Rückseiten. Vorderes Bedienfeld 1 Schalter [PHANTOM +48V] Dieser Schalter liefert eine Phantomspannung von +48 V an die XLR-...
Page 33 - Buchse MASTER PHONES
Deutsch 9 4 [PEAK]-Anzeigen Eine rote [PEAK]-Anzeige leuchtet auf, wenn das Eingangssignal, das den [GAIN]-Regler passiert hat ( 5 ), einen Pegel von 3 dB unterhalb des Clipping (Übersteuerung) erreicht hat. Um mit optimalem Pegel aufzunehmen, stellen Sie den [GAIN]-Regler ( 5 ) so ein, dass dieser ...
Page 34 - Wenn der Wordclock Master in einem; Wenn das i88X nicht die korrekte
Deutsch 10 mithilfe von mLAN Auto Connector oder mLAN Graphic Patchbay einstellen (Seite 20). INT: Das i88X verwendet die interne Clock mit 44,1 kHz. ADAT: Das i88X verwendet das empfangene ADAT-Signal als Master Clock. mLAN: Das i88X verwendet das empfangene mLAN-Signal als Master Clock. Leuchtet g...
Page 37 - Anschließen externer Geräte
Deutsch 13 Anschließen externer Geräte Bevor Sie andere Geräte am i88X anschließen, schalten Sie zuerst alle beteiligten Geräte aus. Bevor Sie Geräte ein- und ausschalten, bringen Sie die Lautstärke angeschlossener Geräte auf Minimum. Andernfalls kann ein elektrischer Schlag oder Schaden an den Gerä...
Page 38 - Einsatz des i88X als Wordclock Slave in einem mLAN-Netzwerk
Deutsch 14 Für Informationen zu Systemanforderungen und Einstellungen zum Herstellen von mLAN-Verbindungen lesen Sie die separate Installationsanleitung und die Online-Anleitung zur mLAN Graphic Patchbay. Wordclocks In einem System mit mehreren digital angeschlossenen Geräten müssen alle digitalen G...
Page 39 - Tiefes Brummgeräusch; Ändern der Stromquelle der einzelnen Geräte.
Deutsch 15 Verbindungen zu externen Geräten beim Einsatz des i88X mit einem Computer Bei gleichzeitiger Verwendung von Audiogeräten, Musikinstrumenten und Computern kann es sein, dass innerhalb des Systems je nach Art der Verbindungen Störgeräusche auftreten. Bei der Planung und Einrichtung eines St...
Page 40 - Mikrofone angeschlossen sind.
Deutsch 16 Anschluss von Musikinstrumenten und Mikrofonen; Einstellen des Eingangspegels Signale, die an den INPUT-Buchsen 1–8 empfangen werden, werden zu den entsprechenden mLAN-Ausgangskanälen 1–8 gesendet. Wenn Sie ein Kanalpaar von 1/2 bis 7/8 zum Abhören ausgewählt haben, können Sie die entspre...
Page 41 - Direktes Abhören
Deutsch 17 Direktes Abhören An den Buchsen MASTER L & R und der MASTER PHONES-Buchse können Sie die Signale an den Buchsen INPUT 1–8, der COAXIAL-Buchse oder den Buchsen OPTICAL DIGITAL STEREO INPUT direkt abhören.Wenn ein Audio-Eingangssignal wie eine Gitarre oder eine Gesangsstimme über den Co...
Page 42 - Systembeispiele; Anschließen des i88X an den Computer
Deutsch 18 Systembeispiele 1. Anschließen des i88X an den Computer Verbinden Sie die IEEE-1394-Buchse eines mit dieser Schnittstelle ausgestatteten Computers mit dem mLAN-Anschluss am i88X mit einem geeigneten IEEE-1394-Kabel. Routen Sie im mLAN Auto Connector oder in der mLAN Graphic Patchbay (Seit...
Page 44 - Herstellen von mLAN-Verbindungen
Deutsch 20 Herstellen von mLAN-Verbindungen In einem mLAN-System können Sie mithilfe der Softwareanwendungen mLAN Graphic Patchbay und mLAN Auto Connector ganz unkompliziert das System konfigurieren und pflegen, die Buchsen am Computer und den einzelnen mLAN-Geräten (virtuelle Ein- und Ausgangsbuchs...
Page 46 - Fehlerbehebung; Falls ein Problem auftritt...; Verzerrter Ton
Deutsch 22 Fehlerbehebung Falls ein Problem auftritt… Wenn Sie keinen Ton oder einen merkwürdigen Ton hören, überprüfen Sie zunächst die nachstehend beschriebenen Punkte, und ergreifen Sie sodann geeignete Maßnahmen. Sollte das Problem weiter bestehen, wenden Sie sich an Ihre Yamaha-Vertragshändler....
Page 47 - Zu wenige Spuren für Aufnahme oder Wiedergabe
Deutsch 23 • Ist die Sampling-Rate (Wordclock) in geeigneter Weise eingestellt? Je nach Kapazität und Geschwindigkeit des Computers kann eine hohe Sampling-Rate die Ursache der Störgeräusche sein. ............. Lesen Sie hierzu den Abschnitt „Anschließen des Computers an ein mLAN-Gerät über mLAN“ im...
Page 48 - Die Verarbeitungsgeschwindigkeit des Computers ist zu langsam
Deutsch 24 • Möglicherweise hat die IEEE-1394-Schnittstelle Ihres Computers eine Grenze bezüglich der gleichzeitig nutzbaren Ports. Prüfen Sie, wie viele Ports gleichzeitig benutzt werden können. • Schalten Sie alle Geräte auf dem mLAN-Netzwerk (mit Ausnahme des Computers) aus, und schließen Sie nac...
Page 49 - Technische Daten; Allgemeine technische Daten
Deutsch 25 - Wählen Sie [Start | Systemsteuerung | Sounds und Audiogeräte | Audio]. Vergewissern Sie sich, dass unter [Soundwiedergabe] und [Soundaufnahme] nicht „mLAN Audio 01“ ausgewählt ist. • (Für Windows) Wählen Sie [Start | Systemsteuerung | Sounds und Audiogeräte | Audio]. Wählen Sie außerdem...
Page 50 - Bedienungselemente
Deutsch 26 *1: Vom ADAT-kompatiblen Gerät eingegebenes Signal: Normale Sampling-Frequenz (Fs) 44,1 kHz (-6%) bis 48 kHz (+6%) Doppelte Sampling-Frequenz 88,2 kHz (-6%) bis 96 kHz (+6%) *2: Immer symmetrisch, unabhängig von der Verwendung von XLR-3-31 oder TRS-Klinke. (1=MASSE, 2=HEISS, 3=KALT/ Spitz...
Page 51 - Français; PRIERE DE LIRE ATTENTIVEMENT AVANT DE PROCEDER; AVERTISSEMENT; ATTENTION
Français 3 PRECAUTIONS D'USAGE PRIERE DE LIRE ATTENTIVEMENT AVANT DE PROCEDER A TOUTE MANIPULATION * Rangez soigneusement ce manuel pour pouvoir le consulter ultérieurement. AVERTISSEMENT Veillez à toujours observer les précautions élémentaires énumérées ci-après pour éviter de graves blessures, voi...
Page 52 - Tirez le rivet vers le haut pour le dégager
Français 4 • Avant de raccorder l'instrument à d'autres éléments électroniques, mettez ces derniers hors tension. Et avant de mettre sous/hors tension tous les éléments, veillez à toujours ramener le volume au minimum. En outre, veillez à régler le volume de tous les composants au minimum et à augme...
Page 53 - A propos du CD-ROM fourni
Français 5 Introduction Merci d'avoir acheté l'interface Yamaha i88X Audio/MIDI.La connexion de l'interface i88X à un ordinateur permet de développer les environnements de production musicale qui utilisent un séquenceur audio sur l'ordinateur. L'interface i88X prend en charge mLAN, un réseau numériq...
Page 54 - Fonctions; Transfert rapide de données via mLAN; Fonction d'écoute directe; Table des matières
Français 6 Fonctions ■ Transfert rapide de données via mLAN La connexion de l'interface i88X à un ordinateur et à d'autre périphériques mLAN via les câbles IEEE1394 (FireWire/i.LINK) permet de transférer les données audio multi-canal et les signaux MIDI multi-port vers et depuis une station de trava...
Page 55 - Principes de base de mLAN
Français 7 Principes de base de mLAN mLAN est un réseau numérique conçu pour les systèmes de musique et basé sur le bus série IEEE1394, un protocole de communications de données de haute per formance, qui constitue la référence dans ce domaine.Les environnements musicaux ne prenant pas en charge mLA...
Page 56 - Noms et fonctions; Panneau avant
Français 8 Noms et fonctions Les numéros signalés à gauche des noms ( 1 - 5 , 7 - A , E - K , et M ) correspondent à ceux qui sont indiqués dans le schéma fonctionnel au dos de la couverture. Panneau avant 1 Commutateur [PHANTOM +48V] Ce commutateur fournit une alimentation dérivée de +48 V aux pris...
Page 57 - Prise MASTER PHONES
Français 9 4 Voyants [PEAK] Un voyant [PEAK] (Crête) s'allume en rouge si le signal d'entrée qui a transité par la commande [GAIN] ( 5 ) atteint le niveau de 3 dB en-dessous du point d'écrêtage. Pour optimiser l'enregis-trement, réglez la commande [GAIN] ( 5 ) de sorte que ce voyant scintille briève...
Page 58 - Si l'horloge maître est un périphérique; Lorsque l'interface i88X renvoie le signal
Français 10 page 10. Vous pouvez sélectionner la fréquence d'échantillonnage à l'aide des applications mLAN Auto Connector ou mLAN Graphic Patchbay (page 20). INT : L'interface i88X utilise l'horloge interne à 44,1 kHz. ADAT : L'interface i88X utilise le signal ADAT entrant comme horloge maître. mLA...
Page 59 - Prises DIGITAL STEREO COAXIAL IN et OUT
Français 11 Panneau arrière E Prises INSERT I/O 1 et 2 (casque TRS) Ces connecteurs TRS 1/4" asymétriques sont utilisés pour les entrées et sorties d'insertion de canaux. Utilisez un câble divisé pour insérer un processeur d'effets externe aux entrées INPUT 1 et 2 ( 3 ) du panneau avant. INSERT ...
Page 61 - Connexion de périphériques externes
Français 13 Connexion de périphériques externes Avant de connecter des périphériques externes à l'interface i88X, mettez tous les périphériques hors tension. Avant de mettre les périphériques sous ou hors tension, il faut diminuer au minimum le réglage de volume sur tous les périphériques concernés,...
Page 62 - Horloges; horloge maître dans le réseau mLAN.
Français 14 Pour les détails sur la configuration système et les réglages requis pour les connexions mLAN, reportez-vous au manuel d'installation fourni séparément ou au manuel en ligne de mLAN Graphic Patchbay. Horloges Dans un système constitué de plusieurs dispositifs numériquement connectés, tou...
Page 63 - Bourdonnement ou bruissement aigu au niveau de l'ordinateur
Français 15 Connexion de périphériques externes dans le cadre de l'utilisation de l'interface i88X avec un ordinateur Lorsque vous utilisez simultanément des périphériques audio, des instruments de musique et des ordinateurs, le système risque de produire des bruits, dont l'importance varie en fonct...
Page 64 - instruments de musique et les microphones.
Français 16 Connexion d'instruments de musique et de microphones et réglage du niveau d'entrée Les signaux entrant sur les prises INPUT 1-8 sont acheminés respectivement vers les canaux 1-8 de sortie mLAN. Si vous avez sélectionné parmi les canaux 1/2 jusqu'à 7/8 une paire de canaux pour la sortie d...
Page 65 - Ecoute directe
Français 17 Ecoute directe Vous pouvez contrôler directement les signaux d'entrée aux prises INPUT 1-8, COAXIAL ou OPTICAL DIGITAL STEREO INPUT via les prises MASTER L et R et MASTER PHONES.Lorsqu'un signal audio entrant, tel qu'un signal de guitare ou de voix est émis via l'ordinateur, il peut y av...
Page 66 - Exemples de systèmes; Utilisation de plusieurs périphériques mLAN
Français 18 Exemples de systèmes 1. Connexion de l'interface i88X à l'ordinateur Branchez le connecteur IEEE1394 d'un ordinateur compatible IEEE1394 sur le connecteur mLAN de l'interface i88X à l'aide d'un câble IEEE1394. Allez dans mLAN Auto Connector ou mLAN Graphic Patchbay (page 20) et acheminez...
Page 68 - Établissement d'une connexion mLAN
Français 20 Établissement d'une connexion mLAN Dans un système mLAN, vous pouvez facilement configurer et maintenir le système, brancher ou débrancher les connecteurs mLAN sur l'ordinateur et sur chaque périphérique mLAN (connecteurs virtuels d'entrée et de sortie de données audio/MIDI) et effectuer...
Page 69 - Voyants DEL
Français 21 Voyants DEL Lorsque vous maintenez le commutateur [SELECT] enfoncé pendant plus d'une seconde, le voyant MONITOR/Sampling Rate correspondant à la fréquence d'échantillonnage actuellement sélectionnée (44k, 48k, 88k ou 96k) clignote en rouge. Voyants Etat Signification ACTIVE Bleu fixe L'...
Page 70 - Dépistage des pannes; Si vous rencontrez un problème...; Le son est distordu
Français 22 Dépistage des pannes Si vous rencontrez un problème… Si vous n'entendez aucun son ou entendez un son étrange, vérifiez d'abord les éléments décrits ci-dessous et prenez les mesures qui s'imposent. Si le problème persiste, consultez votre revendeur Yamaha. ■ Aucun son ou un son de très fa...
Page 71 - Hauteur de ton incorrecte
Français 23 • Des périphériques produisant des parasites (tels que des périphériques contenant des inverseurs d'alimentation, etc.) sont-ils situés à proximité des câbles? Eloignez tous les câbles des sources possibles de parasites. • Vérifiez que le câble mLAN n'est pas défectueux. Les câbles qui n...
Page 72 - La vitesse du processeur de l'ordinateur est trop lente
Français 24 • Mettez tous les périphériques du réseau mLAN hors tension (à l'exception de l'ordinateur) et rebranchez les périphériques un par un jusqu'à ce que vous ayez identifié le périphérique à l'origine du problème. • (Pour Windows) (En cas de retrait du bus mLAN à l'aide du paramètre [Safely ...
Page 73 - Spécifications techniques; Caractéristiques générales
Français 25 - Sélectionnez [Démarrer | Panneau de configuration | Sons et périphériques audio | Voix]. Assurez-vous qu'une option autre que « mLAN Audio 01 » est sélectionnée pour les paramètres « Lecture de la parole » et « Enregistrement vocal ». - Sélectionnez [Démarrer | Panneau de configuration...
Page 74 - Commande
Français 26 *1: Entrée de signal à partir du périphérique compatible ADAT : Taux normal Fs 44,1 kHz (- 6 %) à 48 kHz(+ 6 %) Taux double Fs 88,2 kHz (- 6 %) à 96 kHz(+ 6 %) *2: Toujours symétrique, quelle que soit l'option : casque XLR-3-31 ou TRS. (1=GND (Masse), 2=HOT (à chaud), 3=COLD (à froid)/Po...
Page 75 - MEMO
Page 77 - i88X BLOCK DIAGRAM
i88X BLOCK DIAGRAM 1 2 3 1 2 3 MONITOR CH7/8 CH3/4 MONITOR CH1/2 MONITOR CH1/2 MONITOR MONITOR CH5/6 +4dB(B ALANCED) 2 +4dB(B ALANCED) 1 2 3 CH 1-8 CH 9- 10 2 2 2 2 2 2 DIGIT AL STEREO INPUTS DIGIT AL STEREO/ AD A T INPUTS MIDI INPUT mLAN INPUTS ANALOG INPUTS CO AXIAL 7/8 5/6 4 3 2 1 OPTICAL MIDI mL...