Yamaha DME Designer- User Manual

Page 2 - Install DME Designer and DME-N Network Driver (; Setup Flow; Software Installation (

DME Setup Manual 2  Install DME Designer and DME-N Network Driver ( page 5 )  USB-MIDI Driver Installation ( page 5 )  Connecting to External Controllers This section covers connection to remote controllers via Ethernet or GPI.  Setting up DME64N/24N Networks via Panel Operations Describes how D...

Page 3 - Minimum System Requirements; Windows Vista / Windows 7; Software Installation

DME Setup Manual 3 Begin by downloading the DME Designer Combo Installer and the USB-MIDI Driver from the “Downloads” page on the Yamaha Pro Audio website (http://www.yamahaproaudio.com/downloads/firm_soft/index.html). Select and download the appropriate driver for your computer’s operating system. ...

Page 4 - Download the DME Designer Combo Installer; Download the USB-MIDI Driver

Software Installation DME Setup Manual 4  Download the DME Designer Combo Installer n The DME-N Network Driver can be downloaded individually, but the DME Designer Combo Installer allows you to download and install both DME Designer and the DME-N Network Driver in one operation. DME Designer: DME s...

Page 5 - Install DME Designer and DME-N Network Driver; Turn off the power of the DME unit.

Software Installation DME Setup Manual 5                                                                    Install DME Designer and DME-N Network Driver Follow the procedure outlined below to install the DME Designer application and...

Page 7 - Connecting a single DME unit directly to a computer via USB cable; Preparation; Once the DME unit has been connected, launch DME Designer.; Basic Setup

DME Setup Manual 7                                                                    Connecting a single DME unit directly to a computer via USB cable This section covers the most basic configuration – that is, using a single comput...

Page 9 - Component Layout and Connection

Basic Setup DME Setup Manual 9 3 Component Layout and Connection 3-1 Double-click the icon for your DME unit to display the Configuration window. 3-2 Drag and drop the components that you require into the configuration area from the list on the left-hand side. 3-3 To connect components, click the re...

Page 10 - Creating scenes

Basic Setup DME Setup Manual 10 4 Creating scenes In order to transmit all data created thus far to a DME unit, it is necessary to store at least one scene. The scene store procedure is outlined below. 4-1 Click the [Scene Manager] button from the Main Panel window to display the “Scene Manager” dia...

Page 12 - Checking sound output

Basic Setup DME Setup Manual 12 6 Checking sound output In the case of DME24N, DME8i-C, DME4io-C, DME-8i-ES or DME4io-ES units, appropriate HA control settings must be made prior to checking the system’s sound output. 6-1 Right-click the [Analog Input] component and select [Open HA Editor] from the ...

Page 13 - Connecting multiple DME units to a computer via Ethernet cables; Setting example; Advanced Setup; Device Group

DME Setup Manual 13                                                                    Connecting multiple DME units to a computer via Ethernet cables In the following two cases, a USB cable should not be used to connect your compute...

Page 14 - DME Network Settings

Advanced Setup DME Setup Manual 14                                                                    DME Network Settings Before making the DME network connections, set the device group and IP address for each DME unit from DME Desi...

Page 16 - Computer Network Settings; Windows XP

Advanced Setup DME Setup Manual 16                                                                    Computer Network Settings The computer’s IP address and TCP/IP filtering must be set up to allow network communication with the DME...

Page 17 - DME Network Connections

Advanced Setup DME Setup Manual 17 4 Click [Properties] on the [General] tab. The “Local Area Connection Properties” dialog box will be displayed. 5 Select [Internet Protocol (TCP/IP)] on the [General] tab, then click [Properties]. The “Internet Protocol (TCP/IP) Properties” dialog box will be displ...

Page 18 - Setting the DME-N Network Driver; For Windows XP

Advanced Setup DME Setup Manual 18                                                                    Setting the DME-N Network Driver In order for the computer to recognize the DME device(s), it is necessary to register the IP addre...

Page 19 - Device Name

Advanced Setup DME Setup Manual 19 7 Select the DME unit that is to function as the Device Group Master from the Target Device List, enter the Device Name and Device Port No., and click the [Apply] button. Device Name Displayed as the port name in DME Designer. Device Port No. (MIDI port number) Set...

Page 20 - Connecting to External Controllers; Connection via Ethernet; Connection via General Purpose Interface (GPI); In-depth Information on DME Units; Tips; Check Input Signals via the GPI Page

DME Setup Manual 20                                                                    Connecting to External Controllers ICP1, CP4SF, CP1SF, and CP4SW controllers are available as optional extras for remote external control of the D...

Page 21 - Setting up DME64N/24N Networks via Panel Operations; ] buttons to move the

In-depth Information on DME Units DME Setup Manual 21                                                                    Setting up DME64N/24N Networks via Panel Operations Device group and IP address settings for DME64N and DME24N u...

Page 22 - Related web site on DME series and peripherals

In-depth Information on DME Units DME Setup Manual 22                                                                    Related web site on DME series and peripherals I The latest information about DME units is available from the Ya...

Page 23 - “DME-N Network Driver” dialog box; Target Device List; Device information; DME-N Network Driver Setup Details

DME Setup Manual 23                                                                    “DME-N Network Driver” dialog box Select [Start]  [Control Panel]  [DME-N Network Driver] to open the “DME-N Network Driver” dialog box. The par...

Page 25 - “Advanced Settings” dialog box; Auto Detect

DME-N Network Driver Setup Details DME Setup Manual 25                                                                    “Advanced Settings” dialog box Click [Advanced Settings] in the DME-N Network Driver dialog box to display the ...

Page 26 - Troubleshooting & Tips

DME Setup Manual 26 Troubleshooting & Tips Problem Possible cause Corrective action The DME unit does not operate correctly in response to control from DME Designer via USB. DME Designer was launched before connecting the USB cable and turning on the DME unit. Ensure that the USB cable is connec...

Page 28 - Uninstall the USB-MIDI Driver

Troubleshooting & Tips DME Setup Manual 28                                                                    Uninstall the USB-MIDI Driver Windows XP 1 Disconnect all USB devices from the computer except for the mouse and keyboa...

Yamaha DME Designer- User Manual

Table of Contents:

Summary

Other Yamaha Models