Yamaha AD8HR- User Manual
Yamaha AD8HR– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PRECAUTIONS; PLEASE READ CAREFULLY BEFORE PROCEEDING; * Please keep this manual in a safe place for future reference.; WARNING
- Page 3 – Explanation of Graphical Symbols; IMPORTANT SAFETY INSTRUCTIONS; C A U T I O N
- Page 4 – Table of Contents; IMPORTANT NOTICE FOR THE UNITED KINGDOM; Connecting the Plug and Cord
- Page 5 – Front Panel; These buttons enable you to select channels to edit.; Part Names and Functions
- Page 6 – Rear Panel; Grounding screw; This BNC connector outputs a wordclock signal.; INPUT 1–8 connectors
- Page 7 – Selecting the Wordclock; The indicator of the selected wordclock flashes rapidly.; Setting the Phantom Power; Rotate the Gain control to adjust the gain; Basic Operations
- Page 8 – Press the same Channel Select button again.; Setting the High Pass Filter; Double Speed Mode; Turn off the power to the AD8HR.
- Page 9 – Adjusting the LED Brightness; Remote Control
- Page 10 – AD8HR Daisy Chain Connection; Connection Examples
- Page 11 – WORD CLOCK jack connection; Wordclocks
- Page 12 – General Specifications; Appendix
- Page 13 – Electrical Characteristics; Measured at DIGITAL OUT. Output impedance of signal generator: 150; Frequency Response
- Page 14 – LED Level Meter; Error Messages; The backup memory is corrupted.; DIGITAL OUT A/B Pin Assignment Table
- Page 15 – HA REMOTE Pin Assignment Table
- Page 18 – COMPLIANCE INFORMATION STATEMENT
Thank you for choosing the Yamaha AD8HR AD converter with remote microphone
preamp.
The AD8HR is an eight-channel AD converter equipped with remote microphone
preamps that feature 96kHz, 24-bit linear AD conversion, 128-times oversampling,
and a dynamic range of 110dB. Its input section features balanced XLR connectors,
high-quality mic preamps, +48V phantom power, and support for both mic and line-
level inputs. The output section supports the AES/EBU format and features a high
sampling frequency of 88.2/96kHz. You can easily adjust the gain for each channel
(in 1dB steps) and set up the high pass filter from the front panel. These settings are
stored in the unit’s backup memory, and are retained even after the power is turned
off. In addition, a special protocol enables you to remotely control the unit from a
connected computer or other device.
Please read this manual thoroughly before using the unit to take the greatest
advantage of the AD8HR’s extensive features for the longest period of time. After you
read this manual, please keep it in a safe place.
Owner’s Manual
EN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other haza...
3 The above warning is located on the top of the unit. Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “danger-ous voltage” within the product’s enclosure that may be of sufficient ...
4 Part Names and Functions ............... 5 Front Panel ................................................ 5Rear Panel .................................................. 6 Basic Operations ............................... 7 Selecting the Wordclock............................. 7Setting the Phantom Powe...
