White Rodgers 1F97-0671 - Manual
White Rodgers 1F97-0671 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OFF; Power Stealing Switches; WARNING; Rear view of thermostat
- Page 3 – WIRING CONNECTIONS; TERMINAL DESIGNATION DESCRIPTIONS; WIRING DIAGRAMS; Single Stage Connections; SINGLE STAGE; Figure 3 – Single Stage System (No Heat Pump) with Two Transformers
- Page 4 – Programming and Confi guration Items; indicates when heating or cooling stage; THERMOSTAT QUICK REFERENCE; Home Screen Description; Figure 5 – Home Screen Display; in Menu mode when selecting key-; Change
- Page 5 – INSTALLER/CONFIGURATION MENU; to change a menu item options.
- Page 8 – OPERATING YOUR THERMOSTAT; Fan Operation; NOTE; Check Thermostat Operation; Heating System; CAUTION; Cooling System
- Page 9 – PROGRAMMING; Energy Saving Factory Pre-Program
- Page 11 – Weighing of Remote Reading:
- Page 12 – Reset Operation; and; TROUBLESHOOTING
Blue Residential Ther mostat
with Automatic Heat/Cool
Changeover Option
Model
Programming Choices
1F97-0671
7 Day
5/1/1 Day
Non-Programmable
www.white-rodgers.com
PART NO. 37-6975A
0832
For Single Stage Applications
Installation and Operating Instructions for Model:
APPLICATIONS
THERMOSTAT APPLICATION GUIDE
1F97-0671 Residential Thermostat
SPECIFICATIONS
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
Description
Heat Pump (No Aux. or Emergency Heat)
Yes
Heat Only Systems
Yes
Millivolt Heat Only Systems – Floor or Wall Furnaces
Yes
Cool Only Systems
Yes
Gas or Oil Heat
Yes
Electric Furnace
Yes
Hydronic (Hot Water) Zone Heat – 2 Wires
Yes
Hydronic (Hot Water) Zone Heat – 3 Wires
Yes
Wired Remote Temperature Sensor (Indoor or Outdoor)
Yes
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this prod-
uct may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For proper
disposal of a product containing mercury or a sealed
container of spilled mercury, place it in a suitable shipping
container. Refer to
www.white-rodgers.com
for location to
send product containing mercury.
Index
Page
Installation
2
Wiring Connections
3
Wiring Diagrams
3
Thermostat Quick Reference
4
Installer Confi guration Menu
5
Operating Your Thermostat
8
Programming
9
Troubleshooting
12
Electrical Rating:
Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30 VAC
Terminal Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A per terminal, 2.5A maximum all terminals combined
Setpoint Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 to 99°F (7 to 32°C)
Differential (Single Stage) . . . . . . . . . . . . . . . . . . . . Heat 0.6°F; Cool 1.2°F
Operating Ambient . . . . . . . . . . . . . . . . . . . . . . . . . . 32°F to +105°F (0 to +41°C)
Operating Humidity . . . . . . . . . . . . . . . . . . . . . . . . . 90% non-condensing max.
Shipping Temperature Range . . . . . . . . . . . . . . . . . -40 to +150°F (-40 to +65°C)
Dimensions Thermostat . . . . . . . . . . . . . . . . . . . . . . 4.2"H x 6.4"W x 1.7"D
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Remove Old Thermostat Before removing wires from old thermostat, mark wires for terminal identifi cation so the proper connections will be made to the new thermostat. Installing New Thermostat 1. Pull the thermostat body off the thermostat base. Forcing or prying on the thermostat will cause damag...
3 Single Stage System RC RH C Y* W* G O/B 6 L CLASS II TRANSFORMER HOT 24VAC NEUTRAL 120VAC Call for heat 24 volt power for cooling 24 volt power for heating 24 volt common (optional for system operation, required for remote sensor and system status indicator) Call for cool Blower/Circulator fan ene...
4 Programming and Confi guration Items 1 "System On" indicates when heating or cooling stage is energized. 2 The word "Hold" is displayed when the thermostat is in the Hold mode. "Temp" is displayed when the thermostat is in a Temporary HOLD mode. 3 Displays "Change Filte...
