White Rodgers 1F85CA-0471 - Manual
White Rodgers 1F85CA-0471 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Remove Old Thermostat; is displayed, the batteries should be replaced before; WIRING CONNECTIONS; Terminal
- Page 3 – WIRING DIAGRAMS; Heat Pump Connections; Single stage compressor; Single Stage and Multi-Stage Connections
- Page 4 – Change; THERMOSTAT QUICK REFERENCE; Home Screen Description
- Page 5 – INSTALLER/CONFIGURATION MENU; MENU
- Page 7 – Set Current Time and Date; button to change the display to the correct set-
- Page 8 – PROGRAMMING (For Programmable Model Only); Enter the Heating Program
- Page 9 – TROUBLESHOOTING; When thermostat is reset, installer confi guration menu; Symptom; panel loose or not properly installed.; No Heat; Set SYSTEM Switch to; HEAT; and raise the; No Cool; for slow cycle in the Confi guration menu,
- Page 10 – Comfort Alert Codes; “Call For
- Page 11 – NOTES
1
Blue Universal Ther mostat with
Automatic Heat/Cool Changeover Option
Single Stage, Multi-Stage or Heat Pump
Installation and Operating Instructions for Model:
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING
THIS CONTROL COULD CAUSE PERSONAL INJURY
AND/OR PROPERTY DAMAGE.
Save these instructions for future use!
APPLICATIONS
SPECIFICATIONS
Electrical Rating:
Battery Power .................................................... mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire ................................................... 20 to 30 VAC
Terminal Load ........................................................... 1.5 A per terminal, 2.5A maximum all terminals combined
Setpoint Range ......................................................... 45° to 90°F (7° to 32°C)
Differential (Single Stage) ......................................... Heat 0.6°F; Cool 1.2°F (adjustable)
Differential (Heat Pump) ........................................... Heat 1.2°F; Cool 1.2°F (adjustable)
Operating Ambient .................................................... 32° to +105°F (0° to +41°C)
Operating Humidity ................................................... 90% non-condensing max.
Shipping Temperature Range ................................... -40° to +150°F (-20° to +65°C)
Dimensions Thermostat ............................................ 4.0”H x 5.11”W x 1.3”D
www.white-rodgers.com
1F85CA-0471 Thermostat
Model
Programming Choices
1F85CA-0471
5/1/1 Day
5/2 Day
Non-Programmable
1F85-0471
5/1/1 Day
5/2 Day
Non-Programmable
1F83-0471
Non-Programmable
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this product
may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any spilled
mercury and place in a sealed container. For proper disposal
of a product containing mercury or a sealed container. Refer
to
www.white-rodgers.com
for location to send product
containing mercury.
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
THERMOSTAT APPLICATION GUIDE
Description
Heat Pump (No Aux. or Emergency Heat)
Yes
Heat Pump (with Aux. or Emergency Heat)
Yes
Systems with up to 2 Stages Heat, 2 Stages Cool
Yes
Heat Only Systems (with optional fan switch)
Yes
Millivolt Heat Only Systems – Floor or Wall Furnaces
Yes
Cool Only Systems
Yes
Gas or Oil Heat
Yes
Electric Furnace
Yes
Hydronic (Hot Water) Zone Heat – 2 Wires
Yes
Hydronic (Hot Water) Zone Heat – 3 Wires
Yes
Compressor with Comfort Alert II Module (1F85CA only)
Yes
Index
Page
Installation
2
Wiring Connections
2
Wiring Diagrams
3
Thermostat Quick Reference
4
Installer Confi guration Menu
5
Operating Your Thermostat
7
Programming
7
Troubleshooting
9
PART NO. 37-6920B
Replaces 37-6920A
0905
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION Thermostat installation and all components of the control system shall conform to Class II circuits per the NEC code. WARNING ! Remove Old Thermostat A standard heat/cool thermostat consists of three basic parts:1. The cover, which may be either a snap-on or hinge type. 2. The base, w...
3 WIRING DIAGRAMS Heat Pump Connections If you do not have a heat pump system, refer to fi gures 4-6.Refer to equipment manufacturers’ instructions for specifi c system wiring information.You can confi gure the thermostat for use with the following heat pump systems. Figure 3 – Heat Pump Systems HEA...
4 Set Save Month Call For Service Change Filter System On 2 SYSTEM Cool Off Time Heat Emer Auto FAN On Auto Run Sched Schedule Menu P Date Run Hold Heat Pump Temp Hold Mo Tu We Th Fr Sa Su Auto Sched Cool Savings Year 11 10 9 1 8 7 6 5 4 3 2 12 Set Mo P SYSTEM Heat FAN Auto Menu RoomTemperature Sett...
