Whirlpool SF367LEMB0 - Manual

5 PARTS AND FEATURES This manual covers several different models. The range you have purchased may have some or all of the parts and features listed. The locations and appearances of the features shown here may not match those of your model. Control Panel Range 1. Left Rear Burner Control2. Left Fro...

6 COOKTOP USE Cooktop Controls Electric igniters automatically light the surface burners when control knobs are turned to IGNITE. Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or while the grate is unoccupied. To Set: 1. Push in and t...

7 Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports. To Clean: 1. Remove the burner cap from th...

9 4. Press TIMER OFF or TIMER* CANCEL anytime to cancel the Timer and reminder tones. Remember, do not press the CANCEL pad because the oven will turn off. To display the time of day for 5 seconds when the timer is counting down, press CLOCK. Control Lock The Control Lock shuts down the control pane...

10 Split Oven Rack (on some models) Split-Rack with Removable Insert The split-rack with removable insert is a space maximizer. When the two are attached, they make a full rack. The insert can also be removed to provide room for large items such as a turkey and casseroles. The insert can also be use...

11 To Bake or Roast: 1. Press BAKE. 2. Press TEMP or TEMP/TIME “up” or “down” arrow pad to set a temperature other than 350°F (175°C) in 5 degree amounts. The bake range can be set between 170°F and 500°F (75°C and 260°C). When the oven temperature is greater than 170°F (77°C), no preheat conditioni...

12 Warm Hold Feature (on some models) IMPORTANT: Food must be at serving temperature before placing it in the warmed oven. Food may be held up to one hour, however breads and casseroles may become to dry if left in the oven during Warm Hold. Warm Hold Feature allows hot cooked foods to stay serving ...

13 Style 2 Series Electronic Oven Control (see “Electronic Oven Controls” section) To Set a Timed Cook: 1. Press BAKE. The bake indicator light will light up. 2. Set the temperature (optional). 3. Press the TEMP/TIME “up” or “down” arrow pad to enter a temperature other than the one displayed. 4. Pr...

14 To Modify Sequence Programming: 1. Press UNDO. The last step of the sequence will be cancelled, and the step prior to the canceled sequence will show on the display for either review or modification. If the programmed sequence has not been started, see “To Program Next Steps of the Sequence” sect...

15 RANGE CARE Self-Cleaning Cycle (on some models) IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well ventilated room. Self-clean th...

16 5. Press START. The time of day is displayed. The door will automatically lock and “LOCKED” and “DELAY” will appear on the display. The door will not unlock until the oven cools. When the start time is reached, the oven will automatically turn on. When the cycle is complete and the oven cools, “E...

17 WARMING DRAWER and TRAY (on some models) Make sure drawer is cool and remove tray. ■ Mild detergent (for both) Oven Light The oven light is a standard 40-watt appliance bulb. It will come on when the oven door is open. It will not work during the Self-Cleaning cycle. On some models, when the oven...

18 To Remove: 1. Open drawer to its full open position. 2. Locate the black triangle-shaped tabs on both sides of the drawer. 1. Tab 3. Press the tab down on the right side, and lift tab up on the left side at the same time, then pull drawer out another inch. 4. Holding the drawer by its sides, not ...

19 Self-Cleaning cycle will not operate ■ Is the oven door open? Close the oven door all the way. ■ Has the function been entered? See “Self-Cleaning Cycle” section. ■ On some models, has a delay start Self-Clean cycle been set? See “Self-Cleaning Cycle” section. ■ Has a delay start been set? See “T...