WEN 20653 - User Manual

GENERAL SAFETY RULES 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct power tool fo...

6 WORKPIECE SAFETY 1. Secure the workpiece to a stable platform using clamps or another practical method. Never hold it in your hand or across your legs. Unstable support could result in a loss of control and personal injury.2. Small workpieces must be adequately secured so that the rotating planer ...

7 ELECTRICAL INFORMATION (CHARGER) AMPERAGE REQUIRED GAUGE FOR EXTENSION CORDS 25 ft. 50 ft. 100 ft. 150 ft. 2A 18 gauge 16 gauge 16 gauge 14 gauge IMPORTANT: Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personne...

• Avoid dangerous environments – Do not charge the battery pack in rain, snow or in damp or wet locations. Do not use the battery pack or charger in the presence of explosive atmospheres (gaseous fumes, dust or flam- mable materials) because sparks may be generated when inserting or removing the bat...

BATTERY & CHARGER SAFETY WARNINGS ABOUT THE BATTERY 1. The battery pack has to be charged completely before you use the tool for the first time.2. For optimum battery performance, avoid low discharge cycles by charging the battery pack frequently.3. Lithium-ion batteries are subject to a natural...

10 Accessories Components UNPACKING & PACKING LIST UNPACKING Carefully remove the planer from the packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make s...

11 KNOW YOUR PLANER TOOL PURPOSE The power to trim doors, flatten boards, and much more is in the palm of your hand with your WEN Planer. Refer to the following diagrams to become familiarized with all the parts and controls of your planer. The components will be referred to later in the manual for ...

12 OPERATION WARNING! To prevent serious injury, make sure all the instructions have been read and understood before operating this tool. Before plugging the machine into the power supply, always check that the trigger switch and trigger lock work properly. USING THE SAFETY KICKSTAND The safety kick...

13 OPERATION ADJUSTING THE CUTTING DEPTH The planer’s cutting depth is determined by the height difference between the adjustable front shoe and the cutting edge of the blade. The depth adjustment knob moves the front shoe to adjust how much blade is exposed, which determines the amount of material ...

OPERATION OPERATING YOUR PLANER 1. Secure the workpiece to a stable platform. Make sure that the surface to be planed is face grain or side grain. Do not plane end grain, as the wood could splinter or possibly explode (see “The Do’s and Dont’s of Grain Direction). 2. Hold the planer firmly with both...

OPERATION WARNING! To avoid injury from accidental startups, always ensure that the tool is switched OFF and un- plugged from the power supply before making any adjustments to the planer. USING THE PARALLEL GUIDE FENCE The parallel guide fence ensures that the planer travels parallel to the edge of ...

ADJUSTMENTS REMOVING OR INSTALLING PLANER BLADES WARNING! To avoid injury from accidental startups, always ensure that the tool is switched OFF and un- plugged from the power supply before making adjustments or installing or removing blades. WARNING! Planer blades are sharp and fragile. Wear protect...

MAINTENANCE WARNING! To prevent serious injury from accidental operation, make sure that the planer is turned off and unplugged from power source before installation, cleaning and maintenance operations. WARNING! Preventive maintenance performed by unauthorized personnel may result in misplacing of ...

EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty. 19

20 EXPLODED VIEW & PARTS LIST No. Part No. Description Qty. 1 Front Shoe 1 2 Front Shoe Spring 1 3 Depth Regulating Shaft 1 4 Depth Gauge Ring 1 5 Depth Knob 1 6 Screw, ST4x16 5 7 Knob Cover 1 8 Screw with Washer, ST4x10 2 9 Square Nut, M6 2 10 Ball Spring 1 11 Ball, 3.5mm 1 12 Housing 1 13 Lock...

21 WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser...