Page 2 - AGENCY APPROVALS; EMC Framework of Australia; US
ii Printed in Mexico. U.S. Patent 5,632,555; 6,000,846; 6,036,361; 6,971,790. Additional U.S. and foreign patents pending. AGENCY APPROVALS CERTIFIED TO: CAN/CSA STD C22.2 NO. 601.1 CONFORMS TO: IEC 60601-1, 60601-1-2, UL STD 2601-1 EMC Framework of Australia The CE mark on this product indicates th...
Page 3 - Table of Contents
Table of Contents SYMBOLS AND DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY AND WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - SYMBOLS AND DESCRIPTIONS; IPXØ
1 SYMBOLS AND DESCRIPTIONS ATTENTION: Caution consult user’s manual for additional information. Type BF Applied Part Handle with Care Transport/Storage Temperature Transport/Storage Humidity Internally Powered Alkaline Battery - AA 1.5V IPXØ Not protected against the ingress of water. Latex Free Do ...
Page 6 - SAFETY AND WARNINGS
2 SAFETY AND WARNINGS In order to obtain accurate and reliable temperature results and ensure patient safety, it is important that this booklet is read thoroughly prior to using the instrument. If you have any technical or clinical questions concerning the thermometer’s use and/or care, please conta...
Page 8 - INTRODUCTION
4 INTRODUCTION Congratulations on your purchase of the Welch Allyn SureTemp Plus Thermistor Thermometer. Please follow the operating and maintenance instructions provided in this manual to ensure years of accurate and reliable service. Please read these instructions thoroughly before using the instr...
Page 9 - SURETEMP PLUS MODEL COMPARISON CHART; SureTemp Plus
5 SURETEMP PLUS MODEL COMPARISON CHART This manual describes features found in SureTemp Plus model 690 and 692 thermometers. Certain features are not available to users of the model 690 thermometer. SureTemp Plus Model 690 SureTemp Plus Model 692 Probe Cover Storage X X F/C Conversion X X Last Tempe...
Page 11 - BUTTON FUNCTIONS; ASSEMBLING THE UNIT
7 BUTTON FUNCTIONS SET-UP ASSEMBLING THE UNIT Your SureTemp Plus thermometer is shipped to you with three 1.5V AA batteries installed. 1. Install the oral/axillary probe (blue ejection button) or optional rectal probe (red Ejection button) by inserting the latching probe connector on the end of the ...
Page 12 - MOUNTING THE UNIT
8 2. Connect the appropriate removable probe well to the thermometer. Note that the cut-out in the probe well fits over the probe cord strain relief. Ensure that the removable probe well “snaps” into position and is completely seated to the thermometer. Place the probe into the well. 3. Insert the b...
Page 13 - DISPLAY INDICATORS; Instrument Malfunction
9 DISPLAY INDICATORS Instrument Malfunction The device is not working properly. Call Welch Allyn’s Customer Service Department for assistance. Broken Probe The probe is broken. Replace probe or call Welch Allyn’s Customer Service Department for assistance. Loss of Tissue Contact The probe has lost c...
Page 16 - ORAL TEMPERATURE MEASUREMENT; Using Probe with Blue Ejection Button and Blue Probe Well; TAKING AN ORAL TEMPERATURE; Ensure that the oral probe (; blue ejection button; button until the head icon appears.
12 ORAL TEMPERATURE MEASUREMENT Using Probe with Blue Ejection Button and Blue Probe Well When used correctly, the SureTemp Plus thermometer accurately measures an oral temperature in approximately 4–6 seconds. The ability of the SureTemp Plus thermometer to take an accurate oral temperature require...
Page 18 - AXILLARY TEMPERATURE MEASUREMENT; PLACING THE THERMOMETER INTO AXILLARY MODE; Ensure that the axillary probe (; button to select the Adult Axillary or Pediatric Axillary icon is; TAKING AN AXILLARY TEMPERATURE
14 AXILLARY TEMPERATURE MEASUREMENT Using Probe with Blue Ejection Button and Blue Probe Well When used correctly, the SureTemp Plus thermometer accurately measures an axillary temperature for pediatric patients (ages 17 and younger) in approximately 10–13 seconds and for adult patients (ages 18 and...
Page 20 - RECTAL TEMPERATURE MEASUREMENT; Using Probe with Red Ejection Button and Red Probe Well; TAKING A RECTAL TEMPERATURE; Ensure that the rectal probe (; red ejection button; engage the probe cover.
16 RECTAL TEMPERATURE MEASUREMENT Using Probe with Red Ejection Button and Red Probe Well When used correctly, the SureTemp Plus thermometer accurately measures rectal temperature in approximately 10–13 seconds. TAKING A RECTAL TEMPERATURE 1. Ensure that the rectal probe ( red ejection button ) and ...
Page 22 - MONITOR MODE TEMPERATURE MEASUREMENT; TAKING A TEMPERATURE USING MONITOR MODE; Press the; Mode Selection; button until the Monitor Mode
18 MONITOR MODE TEMPERATURE MEASUREMENT Using Probe with Blue Ejection Button (Oral/Axillary) or Red Ejection Button (Rectal) Monitor Mode continuously displays the temperature of the probe for as long as the probe remains in place at the measurement site and remains within the operating patient tem...
Page 24 - INSTRUMENT SECURITY; as a warning, along with a number
20 INSTRUMENT SECURITY The SureTemp Model 692 thermometer is equipped with electronic security options designed to reduce the risk of theft. These options include both Temperature Count and Instant-On security features. TEMPERATURE COUNT The Temperature Count security feature allows you to take a se...
Page 25 - MAINTENANCE; REPLACING THE BATTERIES; Remove the probe and the probe well.; CLEANING; ROUTINE CLEANING; as CaviCide
21 MAINTENANCE REPLACING THE BATTERIES 1. Remove the box of probe covers from the probe cover storage compartment on the back of the unit. 2. Remove the probe and the probe well. 3. Press inward on the textured grips on each side of the assembly to remove the battery door from the back of the unit. ...
Page 26 - CLEANING THE REMOVABLE PROBE WELL; Cide; DISPOSAL; DISPOSING OF EQUIPMENT
22 CLEANING THE REMOVABLE PROBE WELL • Remove the probe well from the unit. Unplug the latching probe connector to prevent the device from consuming battery power while you are cleaning the probe well. • Clean the inner surface of the probe well by swabbing the surface with a cloth dampened with a m...
Page 27 - PERFORMANCE AND TECHNICAL SPECIFICATIONS
23 PERFORMANCE AND TECHNICAL SPECIFICATIONS Ambient Operating Temperature Range 50.0 ° F to 104.0 ° F (10.0 ° C to 40.0 ° C) Operating Altitude -557 ft. to +16,000 ft / -170m to +4877m Patient Temperature Range 80.0 ° F to 110.0 ° F (26.7 ° C to 43.3 ° C) Temperature Predict Time* Oral: Approximatel...
Page 28 - WELCH ALLYN SERVICE POLICY; Welch Allyn does not accept returns that are missing an RMA
24 REPLACEMENT PARTS AND ACCESSORIES To order replacement parts and accessories, please contact the Welch Allyn office nearest to you. The phone numbers for these offices are provided on page 26. SERVICE Except for the replaceable AA batteries, this instrument contains no user-serviceable parts. Ret...
Page 29 - LIMITED WARRANTY; ONE-YEAR LIMITED WARRANTY ON PROBES AND PROBE COVERS
25 LIMITED WARRANTY THREE-YEAR LIMITED WARRANTY ON MODEL 692 AND TWO-YEAR LIMITED WARRANTY ON MODEL 690 INSTRUMENTS Instrumentation purchased new from Welch Allyn, Inc. (Welch Allyn) is warranted to be free from original defects in material and workmanship under normal use and service for a period o...
Page 30 - SERVICE CENTERS
26 SERVICE CENTERS For information about any Welch Allyn product, call Welch Allyn Customer Support: USA +1 800 535 6663 +1 315 685 4560 Australia +61 2 9638 3000 Canada +1 800 561 8797 China +86 21 6327 9631 European Call Center +353 46 90 67790 France +33 1 60 09 33 66 Germany +49 7477 9271 70 Jap...
