Wayne RPP50 - Manual

Operating Instructions
Instructions d’Utilisation
Manual de Instrucciones

Notes
Notas

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the
product described. Protect yourself and others by observing all safety information. Failure to comply with instructions
could result in personal injury and/or property damage! Retain instructions for future reference.

Description

This sewage pump is suitable for
pumping sewage, effluent, wastewater,
groundwater and other nonexplosive,
noncorrosive liquids with up to two
inch solids. The pump includes a wide
angle float switch that turns the pump
on and off as the fluid level rises and
falls.

Unpacking

Inspect this unit before it is used.
Occasionally, products are damaged
during shipment. If the pump or
components are damaged, return the
unit to the place of purchase for
replacement. Failure to do so could
result in serious injury or death.

Operating Instructions

Model RPP50

331300-001 8/04

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.

Danger indicates
an imminently

hazardous situation which, if not
avoided, will result in death or serious
injury.

Warning indicates
a potentially

hazardous situation which, if not
avoided, could result in death or
serious injury.

Caution indicates a
potentially

hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.

Notice indicates

important

information, that if not followed, may
cause damage to equipment.

NOTICE

!

CAUTION

!

WARNING

!

DANGER

General Safety
Information

1. Know the pump application,

limitations, and potential hazards.

Do not use to pump
flammable or explosive
fluids such as gasoline, fuel
oil, kerosene, etc. Do not
use in flammable and/or explosive
atmospheres. Use pump only with
liquids compatible with pump
component materials. Failure to follow
this warning can result in personal
injury and/or property damage.

2. Make certain that the power source

(electric motor) conforms to the
requirements of the equipment.

Disconnect power before
servicing. If the power dis-
connect is out of sight, lock
in the open position and
tag it to prevent unexpected
application of power. Failure to do so
could result in fatal electrical shock!

!

DANGER

!

WARNING

© 2004 Wayne Water Systems

Specifications

Power supply requirements ......120V, 60 hz
Circuit requirements..................15 amps (min)
Motor duty .................................Intermittent
Motor .........................................120V, 1 Phase
Horsepower ...............................1/2
Motor full load ..........................6.3 amps
Liquid temperature range ........40°F to 120°F
Max. operating position ...........45

o

from vertical

Dimensions .................................14” x 12”
Intake .........................................2”
Discharge....................................2” NPT female
Cut-in level (factory set) ............16”
Cut-out level (factory set) .........7.5”
Differential.................................8.5”
Switch .........................................90

o

wide angle

mechanical tether switch

Power cord .................................18 gauge 3 conductor

w/plug

Construction

Motor housing ...........................Cast iron
Volute .........................................Cast iron
Impeller ......................................Glass reinforced PBT
Seal plate....................................Cast Iron
Shaft seal ....................................Mechanical

GALLONS PER HOUR AT TOTAL HEAD IN FEET

Model

0

5

10

15

RPP50

5700

4560

3240

900

Performance

1/2 HP Cast Iron
Sewage Pump

For parts, product & service information

visit

www.waynepumps.com