Vulcan VE40 ML-126850 - Manual
Vulcan VE40 ML-126850 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 3 – GENERAL; INSTALLATION, OPERATION; Control Panel; TOOLS; Standard; NOTE; Special
- Page 4 – SPECIFICATIONS; REMOVAL AND REPLACEMENT OF PARTS; COVERS AND PANELS
- Page 5 – POWER SUPPLY BOX
- Page 6 – TEMPERATURE CONTROLLER
- Page 7 – LEFT SIDE VIEW SHOWN; PAN POSITION/DOWN LIMIT
- Page 8 – SIDE VIEW SHOWN
- Page 10 – DC LIFT MOTOR
- Page 11 – VE30 REAR VIEW SHOWN; GEAR REDUCER
- Page 12 – HEATING ELEMENTS
- Page 13 – RIGHT SIDE REAR VIEW SHOWN; HIGH LIMIT THERMOSTAT
- Page 15 – SERVICE PROCEDURES AND ADJUSTMENTS
- Page 16 – THERMOCOUPLE TEST
- Page 17 – HEATING ELEMENT TEST
- Page 19 – LID SWITCH ADJUSTMENT
- Page 20 – LID SPRING TENSION
- Page 21 – ELECTRICAL OPERATION; COMPONENT FUNCTION; BRAISING PAN CONTROLS; MOTORIZED PAN LIFT OPTION CONTROLS
- Page 22 – COMPONENT LOCATION
- Page 23 – SEQUENCE OF OPERATION
- Page 25 – SCHEMATIC DIAGRAM
- Page 26 – WIRING DIAGRAMS
- Page 28 – TROUBLESHOOTING; ELECTRIC HEATING (MANUAL LIFT OR MOTORIZED LIFT OPTION); SYMPTOMS
- Page 29 – MOTORIZED LIFT OPTION ONLY
- Page 32 – CONDENSED SPARE PARTS LIST
A product of VULCAN-HART
LOUISVILLE, KY 40201-0696
F35410 (May 2003)
- NOTICE -
This Manual is prepared for the use of trained Vulcan Service
Technicians and should not be used by those not properly
qualified. If you have attended a Vulcan Service School for this
product, you may be qualified to perform all the procedures
described in this manual.
This manual is not intended to be all encompassing. If you have
not attended a Vulcan Service School for this product, you should
read, in its entirety, the repair procedure you wish to perform to
determine if you have the necessary tools, instruments and skills
required to perform the procedure. Procedures for which you do
not have the necessary tools, instruments and skills should be
performed by a trained Vulcan Service Technician.
Reproduction or other use of this Manual, without the express
written consent of Vulcan, is prohibited.
VE40 SHOWN
SERVICE MANUAL
ELECTRIC BRAISING PANS
(30 & 40 GALLON)
VE30
ML-126849
VE40
ML-126850
For additional information on Vulcan-Hart Company or to locate an authorized parts
and service provider in your area, visit our website at www.vulcanhart.com.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ELECTRIC BRAISING PAN F35410 (May 2003) Page 2 of 32 TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation, Operation and Cleaning . . . . . . . . . . . ...
ELECTRIC BRAISING PAN F35410 (May 2003) Page 3 of 32 GENERAL INSTALLATION, OPERATION AND CLEANING Refer to the Installation & Operation Manual forspecific instructions. INTRODUCTION The tilting braising pan (skillet) is a versatile pieceof cooking equipment. It can be used to stew,simmer, steam,...
ELECTRIC BRAISING PANS - REMOVAL AND REPLACEMENT OF PARTS F35410 (May 2003) Page 4 of 32 SPECIFICATIONS VOLTS PHASE AMPERAGE PER LINE VE30 VE40 TOTAL KW L1-L3 TOTAL KW L1 L2 L3 208 1 9 43 12 58 58 --- 240 1 12 50 16 67 67 --- 208 3 9 25 12 39 39 25 240 3 12 29 16 46 46 29 480 3 12 15 16 23 23 15 NOT...
