VTech IS6100 - Manual

VTech IS6100

VTech IS6100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – light flashes three times in blue; Headset charging; Telephone base overview
  • Page 3 – Handset overview; Headset overview
  • Page 4 – Telephone settings; Screen display; Using the menu; Predial by first dialing the telephone number and then press; Telephone operation
  • Page 5 – You can use a maximum of five handsets, or four handsets and
  • Page 6 – the first or second ring.; Call log
  • Page 7 – about answering system and voicemail; message window on the telephone base flashes, there are; answering system settings; answering system operation; “Record after the tone. Press
  • Page 8 – If you have difficulty with your telephone and headset, please
Loading the manual

Quick start guide

LS6375-3 (LS6325-2 and IS6100)

Introduction

This quick start guide provides you with the basic installation

and use instructions. A limited set of features are described in

abbreviated form.
Please refer to the user’s manual for complete installation and

operation instructions.

Telephone base and handset charger installation

Install the telephone base and handset charger as shown below.

Use only the power adapters and batteries supplied with

this product.

Handset battery installation and charging

Install the handset battery as shown below. Once you have

installed the handset battery, you may be able to make and

receive short calls. For best performance, charge the handset

battery continuously for at least 6 hours.

CHarge light

remains on

when charging.

Plug the battery connector

securely into the socket,

matching the color-coded

label.

2 Place the battery with the

wires inside the battery

compartment.

3 Slide the battery

compartment towards the

center of the handset until it

clicks into place.

4 Charge the handset in the

telephone base.

Telephone base

Telephone

wall jack

Handset charger

Electrical outlet not

controlled by a wall switch

If you have DSL

high speed

Inter net ser vic e,

a DSL filter (not

inc luded) is

required.

Telephone

line c ord

Telephone base

power adapter

Handset

c harger

adapter

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - light flashes three times in blue; Headset charging; Telephone base overview

2 Headset charger installation Install the headset charger as shown below. Headset c harger Plug the small end of the headset c harger power adapter into the power jack of the headset c harger. Plug the large end of the headset charger power adapter into an electrical outlet not controlled by a wall...

Page 3 - Handset overview; Headset overview

3 Handset overview / VOL (directory/volume)Review the directory when the telephone is not in use.Scroll up while in a menu.Increase the listening volume during a call. CHarge lightOn when the handset is charging. 1Press repeatedly to add or remove 1 in front of a call log number before dialing or sa...

Page 4 - Telephone settings; Screen display; Using the menu; Predial by first dialing the telephone number and then press; Telephone operation

4 Telephone settings Default settings are indicated by an asterisk(*). Screen display Function Options LCD language Set the screen display language. english* Français español Clr voicemail Turn off the voicemail indicators. Turn off indicator? Key tone Set whether the handset beeps whenever a key is...

Other VTech Models

All VTech Other