Page 3 - Welcome; THANK YOU FOR CHOOSING VIZIO; Extended Warranties; WHEN READING THIS MANUAL
Welcome THANK YOU FOR CHOOSING VIZIO And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged pa...
Page 6 - Lightning Protection
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical...
Page 7 - Table of Contents; Changing the Appearance of Digital Closed Captions . 32
Table of Contents 1 Installing the TV ................................................ 3 Inspecting the Package Contents ..................................... 3Installing the TV ................................................................... 4 Installing the TV Stand ...............................
Page 9 - Installing the TV; INSPECTING THE PACKAGE CONTENTS; PACKAGE CONTENTS
3 1 Installing the TV INSPECTING THE PACKAGE CONTENTS Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. VIZIO LED HDTV Power Cord Quick Start Guide Remote Control with Batteries PACKAGE CONTENTS 6 x M4 14mm Phi...
Page 10 - INSTALLING THE TV; Installing the TV Stand
1 4 Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface such as a blanket. INSTALLING THE TV After removing the TV from the box and inspecting the package contents you can begin installing the TV. Your TV can be installed in...
Page 13 - REAR PANEL; Controls and Connections; a home audio receiver.
2 7 REAR PANEL Controls and Connections REAR PANEL Coaxial - Connect coaxial cable from cable, satellite, or antenna. Optical Audio Out - Connect an optical/SPDIF audio device, such as a home audio receiver. Stereo Audio Out - Connect an RCA audio device, such as sound bar. HDMI - Connect an HDMI de...
Page 14 - SIDE PANEL; Press once to access the Input menu.
2 8 SIDE PANEL SIDE PANEL Power/Input - Press once to turn on the TV. Press once to access the Input menu. Press and hold to turn off the TV.
Page 15 - REMOTE SENSOR & POWER INDICATOR; When using the remote, aim it directly at this sensor.; FRONT PANEL
2 9 FRONT PANEL REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on pa...
Page 16 - REMOTE CONTROL
2 10 REMOTE CONTROL REMOTE CONTROL INPUT EXIT GUIDE BACK 1 4 7 WIDE MENU OK VOL VOL CH CH 3 6 9 — 2 5 8 0 INPUT Change the currently-displayed input. ARROW Navigate the on-screen menu. EXIT Close the on-screen menu. WIDE Switch the display mode. MUTE Turn the audio off or on. BACK Go to the previous...
Page 17 - Replacing the Batteries; Insert two batteries into the remote control. Make sure that
2 11 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
Page 18 - Connecting Your Devices; CONNECTING A DEVICE; Game Console; BEST; GOOD; BACK OF TV; BETTER
3 12 Connecting Your Devices CONNECTING A DEVICE Game Console Cable/Satellite Box DVD/Blu-ray Player Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.). 2. Turn the TV and your device o...
Page 19 - CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
3 13 COAXIAL CABLE Coaxial cables are the traditional way of connecting antennas and cable television signals to your TV. Coaxial cables carry both audio and video signals through a single connector. AV CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to your ...
Page 21 - CONNECTING AN AUDIO DEVICE
3 15 CONNECTING AN AUDIO DEVICE Home Audio Receiver VIZIO Sound Bar Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has an audio port that matches an available port on the TV (HDMI, RCA, etc.). 2. Turn the TV and your audio device off. 3. Conn...
Page 22 - CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES; • CEC 2-way Communication
3 16 CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES HDMI CABLE HDMI technology transmits crystal-clear digital multi-channel surround audio through a single HDMI cable. Audio Return Channel-enabled (ARC) TVs allow audio to be sent over an already connected HDMI cable, eliminating the need for a sepa...
Page 23 - CONNECTING AN AUDIO DEVICE - ARC
3 17 Without HDMI ARC With HDMI ARC CONNECTING AN AUDIO DEVICE - ARC HDMI HDMI Your Home Audio Receiver Your Blu-Ray Player Your TV HDMI HDMI Your Home Audio Receiver Your Blu-Ray Player Built-in Tuner Built-in Tuner 3.5mm (Audio) Your TV With an HDMI ARC setup, the audio connection between your TV ...
Page 25 - Using the On-Screen Menu; VIZIO; NAVIGATING THE ON-SCREEN MENU
5 19 Using the On-Screen Menu Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the MENU button on the remote. From this menu, you can: • Adjust the Picture settings• Adjust the Audio settings• Activate the Sleep Timer • Adjust the Tuner settings• Set up Closed Captio...
Page 27 - ADJUSTING THE PICTURE SETTINGS
5 21 ADJUSTING THE PICTURE SETTINGS Your TV display can be adjusted to suit your preferences and viewing conditions. To adjust the picture settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Picture and press OK . The...
Page 31 - ADJUSTING THE AUDIO SETTINGS
5 25 ADJUSTING THE AUDIO SETTINGS To adjust the audio settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK . The AUDIO menu is displayed. 3. Use the Arrow buttons to highlight the setting you wish to...
Page 33 - SETTING TIMERS
5 27 Setting the Auto Power Off Feature To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. To set the Auto Power Off feature: 1. From the TIMERS menu, use the Up/Down Arrow buttons on the remote to highlight A...
Page 34 - SETTING UP THE TUNER
5 28 SETTING UP THE TUNER You can use the TV’s Tuner menu to: • Select a Tuner Input• Perform an Auto Channel Scan• Perform a Partial Channel Scan• Manually Add Channels• Select Channels to Skip• Select Analog MTS Modes• Select Digital Languages Help VIZIO Network Sleep Timer Input CC ABC Audio Wide...
Page 37 - LISTENING TO ALTERNATE AUDIO
5 31 Changing the Digital Audio Language Some digital over-the-air (free), cable, and satellite channels broadcast programs in more than one language. The TV’s Digital Audio feature allows you to listen to audio in alternate languages. Not all programs are broadcast in alternate languages. The Digit...
Page 38 - SETTING UP CLOSED CAPTIONING
5 32 SETTING UP CLOSED CAPTIONING Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. The Closed Captioning menu only appears when the input is an antenna for Over-the-Air signals, cable TV directly from the wall (no ca...
Page 39 - CLOSED CAPTION TEXT SAMPLE
5 33 • Background Color - Change the color of the background directly behind the text. • Background Opacity - Change the transparency of the background directly behind the text. • Window Color - Change the color of the closed captioning box. • Window Opacity - Change the opacity of the closed captio...
Page 40 - RENAMING DEVICES ON THE INPUT MENU
5 34 RENAMING DEVICES ON THE INPUT MENU Inputs can be renamed to make them easier to recognize on the Input menu (see Changing the Input Source on page 20). For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” To change the name o...
Page 41 - CHANGING THE TV SETTINGS
5 35 CHANGING THE TV SETTINGS Using the system menu, you can: • View system information• Change the on-screen menu language • Set the time zone and local settings • Set up parental controls• Adjust the CEC settings• Adjust when the power indicator is illuminated • Reset the TV settings & set up ...
Page 47 - USING THE INFO WINDOW; GUIDE; Oliver’s Holiday Surprise; he’ll encounter on the way?; Program Description; Channel/Input Information
5 41 USING THE INFO WINDOW The Info Window can be displayed by pressing the GUIDE button on the remote: • Press the GUIDE button once to display channel, input, and display information. • Press the GUIDE button twice to display the program title, program rating, audio information, and the start and ...
Page 48 - Using the USB Media Player; USING THE USB MEDIA PLAYER
6 42 Using the USB Media Player USING THE USB MEDIA PLAYER The USB Media Player allows you to connect a USB thumb drive to your TV and view photos. Preparing Your USB Drive to Play USB Media To play USB media, you must first save your photos onto a USB thumb drive: • The USB thumb drive must be form...
Page 49 - View Thumbnails or
6 43 Start Slideshow Name A-Z Thumbnails Settings View: Sort: Photo VIZIO_2GB\Photo\root File Name: D 1920x1080 Resolution: 1920x1080 Size: 1607270KB USB1: A.jpg root B.jpg C.jpg D.jpg E.jpg F.jpg G.jpg H.jpg I.jpg Page 1 of 1 VIZIO Current Folder Displays the folder path. Page Information If your U...
Page 50 - Troubleshooting & Technical Support; Your can also contact our; Live Chat; Do You Have Questions? Find Answers At
A Troubleshooting & Technical Support Find help with: • New Product Setup• Connecting Your Devices• Technical Problems• Product Updates• And More Your can also contact our award-winning support team at: Phone:Email: (877) 878-4946 (TOLL-FREE) techsuppor t@ VIZIO .com Hours Of Operation: Monday -...
Page 53 - Specifications; Component Video Inputs:; RCA Analog Stereo Output,
B 47 Specifications E320-B1 Screen Size: 32" Class Viewable Area: 31.50" Dimensions w/ Stand: w/o Stand: 28.56" x 18.69" x 6.87" 28.56" x 17.00" x 2.48" Weight w/ Stand: w/o Stand: 11.46 lbs 10.80 lbs TV Type: D-LED Refresh Rate: 60 Hz Maximum Resolution: 1366 x 768 P...
Page 54 - Remote Control Model:
B 48 E320-B1 Remote Control Model: XRT020 Certifications: UL/CUL, FCC Class B, HDMI (CEC, ARC), Dolby Digital Compliance: Energy Star 6.0 Voltage Range: 120V @ 60 Hz Power Consumption: 32W Standby Power: <1W
Page 55 - Limited Warranty
C 49 Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of...
