Vizio E241i-A1 - Manual

2 Setting Up Closed Captioning ........................................... 41 Changing the Appearance of Digital Closed Captions . 41 Renaming Devices on the Input Menu .............................. 43Changing the TV Settings ................................................... 44 Viewing System Inf...

3 1 installing the TV insPeCTing The PaCkage ConTenTs Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. VIZIO LED HDTV with Stand PaCkage ConTenTs insTalling The TV After removing the TV from the box and inspec...

1 5 installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. e241i-a1 Screw Size: M4 H...

2 6 Controls and Connections ethernet - Connect an Ethernet cable from a home network. Coaxial - Connect a coaxial cable from an antenna or a cable or satellite box. optical audio out - Connect an optical/SPDIF audio device, such as home audio receiver. stereo audio out - Connect a 3.5mm audio devic...

2 7 PoWer - Turn TV off or on. menu - Open the on-screen menu. Channel uP/doWn - Change the channel. Volume uP/doWn - Increase or decrease the volume level. inPuT - Change the input source. side Panel INPUT MENU CH CH VOL VOL

2 8 Front Panel fronT Panel remoTe sensor & PoWer indiCaTor When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On ...

2 9 remote control remoTe ConTrol inPuT Change the currently-displayed input. arroW Navigate the on-screen menu. exiT Close the on-screen menu. Closed CaPTions Turn closed captions on or off. a/V ConTrols Control USB media player. Wide Switch the display mode. muTe Turn the audio off or on. BaCk Go ...

2 10 replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.

3 11 Connecting Your devices ConneCting A DeviCe * Maximum Resolution Game Console Cable/Satellite Box DVD/Blu-ray Player Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). 2. Turn the ...

3 12 COAXIAL CABLE Coaxial cables are the traditional way of connectiong antennas and cable television signals to your TV. Coaxial cables carry both audio and video signals through a single connector. AV CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to your...

3 14 ConneCting A Computer Personal Computer Your TV can be used to display output from a personal computer. To use your TV as a PC display: 1. Connect a VGA cable (not included) to your PC and the RGB port on the back of the TV. This cable transmits video. 2. Connect a 3.5mm cable (not included) to...

3 15 ConneCting An AuDio DeviCe Home Audio Receiver VIZIO Sound Bar Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has a video port that matches an available port on the TV (Optical, RCA, or HDMI). 2. Turn the TV and your audio device off. 3....

3 16 HDmi CABLe HDMI technology transmits crystal-clear digital multi-channel surround audio through a single HDMI cable. Audio Return Channel-enabled (ARC) TVs allow audio to be sent over an already connected HDMI cable, eliminating the need for a separate audio cable. See Connecting an Audio Devic...

3 17 Without hdmi arC With hdmi arC ConneCTing an audio deViCe - arC HDMI HDMI Your Home Audio Receiver Your Blu-Ray Player 3.5 mm (Audio) Your TV HDMI HDMI Your Home Audio Receiver Your Blu-Ray Player Your TV With an HDMI ARC setup, the audio connection between your TV and Home Audio Receiver can b...

3 18 ConneCting to your network Your TV is internet-ready. It can be connected to your home network with a Wired or Wireless connection. Connecting to a Wired network (Best) 1. Connect an ethernet cable to your router and to the ethernet port on the back of the TV. See below. 2. Use the Guided Netwo...

4 19 The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use. Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. • Your devices should be connect...

5 21 using the on-screen menu Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the menu button on the remote. You can also open the on-screen menu by pressing the VIA button and selecting hdTV settings from the VIA Dock, then pressing ok . From this menu, you can: • ...

5 23 viewing video with the menu oPen When the on-screen menu opens, it covers the left-hand portion of the picture. The picture can be displayed in three different ways: • full-sized and centered on the screen - The left-hand portion of the picture covered by the menu. • resized to fit - The entire...

5 24 adjuSting the Picture SettingS Your TV display can be adjusted to suit your preferences and viewing conditions. To adjust the picture settings: 1. Press the menu button on the remote. The on-screen menu is displayed. 2. Use the arrow buttons on the remote to highlight Picture and press ok . The...

5 32 adjuSting the audio SettingS To adjust the audio settings: 1. Press the menu button on the remote. The on-screen menu is displayed. 2. Use the arrow buttons on the remote to highlight audio and press ok . The AUDIO menu is displayed. 3. Use the arrow buttons to highlight the setting you wish to...

5 34 setting the auto Power off feature To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. To set the Auto Power Off feature: 1. From the TIMERS menu, use the up/down arrow buttons on the remote to highlight a...

5 35 uSing the network connection menu Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. Connecting to a Wireless network To connect to a wireless network whose network name (SSID) is being broadcast: If your TV is connected to a network with an Ethernet ...

5 37 Setting uP the tuner You can use the TV’s Tuner menu to: • Select a Tuner Input• Perform an Auto Channel Scan• Perform a Partial Channel Scan• Manually Add Channels• Select channels to skip• Select Analog MTS modes• Select Digital Languages Help VIZIO Network Sleep Timer Input CC ABC Audio Wide...

5 40 Changing the digital audio language Some digital over-the-air (free), cable, and satellite channels broadcast programs in more than one language. The TV’s Digital Audio feature allows you to listen to audio in alternate languages. Not all programs are broadcast in alternate languages. The Digit...

5 41 Setting uP cloSed caPtioning Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. The Closed Captions menu does not appear when an HDMI input is selected. To activate or deactivate closed captions: 1. Press the menu...

5 42 • Background Color - Change the color of the background directly behind the text. • Background opacity - Change the transparency of the background directly behind the text. • Window Color - Change the color of the closed captioning box. • Window opacity - Change the opacity of the closed captio...

5 43 renaming deviceS on the inPut menu Inputs can be renamed to make them easier to recognize on the Input menu (see Changing the Input Source on page 22). For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” To change the name o...

5 44 changing the tv SettingS Using the System menu, you can: • View system information• Change the on-screen menu language • Set the time zone and local settings • Set up parental controls• Adjust the CEC settings• Adjust when the power indicator is illuminated • Reset the TV settings & set up ...

5 50 uSing the inFo window The Info Window can be displayed by pressing the info or guide button on the remote: • Press the info or guide button one time to display channel, input, and display information. • Press the info or guide button two times to display the program title, program rating, audio...

6 51 using the usB media Player using The usB media PlaYer The USB Media Player allows you to connect a USB thumb drive to your TV and play music, video, or photos. Preparing Your usB drive to Play usB media To play USB media, you must first save your files on a USB thumb drive: • The USB thumb driv...

6 52 Browse Photos Artist A-Z View: Sort: Music MyFlashDrive\Audio\root\My Music USB1: MyFlashDrive My Music Page 1 of 1 VIZIO album art If included on the USB thumb drive and associated with your music, the album art will display here. Progress Bar Displays the duration of the current- ly-playing s...

7 55 using ViZio internet apps Plus ™ (V.i.a. Plus) VIZIO Internet Apps Plus (V.I.A. Plus) delivers popular online content to your TV. V.I.A. features a selection of Apps that allow you to watch movies and TV shows, listen to music, get weather and news information, and more—all on demand. A high-sp...

a Troubleshooting & Technical support DO YOU HAVE QUESTIONS? LET US HELP! YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT Phone: Email: Web: (877) 878-4946 (TOLL-FREE) [email protected] www.VIZIO.com/support Hours of operation: Monday - Friday: 5 AM TO 8 PM (PST) Saturday - Sunday: 7 AM TO ...

B 63 specifications e241i-a1 screen size: 24” Class Viewable area: 23.54” dimensions w/ stand: w/o stand: 22.08” x 14.31” x 6.20” 22.08” x 14.31 x 1.57” Weight w/ stand: w/o stand: 8.11 lbs 7.91 lbs TV Type: LED refresh rate: 60 Hz maximum resolution: 1920 x 1080 Pixel Pitch: 0.2715 mm (H) x 0.2715 ...

B 64 e241i-a1 audio outputs: RCA Analog Stereo Output, Optical Digital osd language: English, Spanish, French ambient light sensor: No remote Control model: XRT112 Certifications: UL/CUL, FCC Class B, HDMI 1.4, Dolby Digital Plus Compliance: Energy Star Voltage range: 120V @ 60 Hz Power Consumption:...

C 65 limited Warranty on ParTs and laBor Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of...