Page 3 - Welcome; Thank You for Choosing ViZio; extended Warranties; When reading This Manual
Welcome Thank You for Choosing ViZio And congratulations on your new VIZIO HDTV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged pa...
Page 6 - lightning Protection
TeleVision anTenna ConneCTion ProTeCTion If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical...
Page 7 - Table of Contents; Changing the Appearance of Digital Closed Captions . 32
Table of Contents 1 Installing the TV ................................................ 3 Inspecting the Package Contents ..................................... 3Installing the TV ................................................................... 3 Installing the TV Stand ...............................
Page 9 - Installing the TV; InspecTIng The package conTenTs; Installing the TV stand; package conTenTs
3 1 Installing the TV InspecTIng The package conTenTs Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. VIZIO LED HDTV with Stand InsTallIng The TV After removing the TV from the box and inspecting the package ...
Page 10 - Installing the TV on a Wall
1 4 To install the base: 1. Place the TV screen-down on a certain, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface, such as a blanket. 2. Align the base with the neck and tighten the hex screw into the base with the included hex wrench. 3. Move the TV with ...
Page 11 - ReaR Panel; Controls and Connections; - Connect component or composite device.
2 5 ReaR Panel Controls and Connections Coaxial - Connect coaxial cable from cable, satellite, or antenna. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out - Connect RCA audio device, such as sound bar. Component/Composite - Connect component or c...
Page 12 - Side Panel; SIDe PAnel; Press and hold to
2 6 Side Panel SIDe PAnel POWeR - Press and hold to turn TV on or off. InPUT - Press to change input source.
Page 13 - FRont Panel; ReMOTe SenSOR & POWeR InDICATOR; When using the remote, aim it directly at this sensor.; FROnT PAnel
2 7 FRont Panel ReMOTe SenSOR & POWeR InDICATOR When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on pa...
Page 14 - Remote ContRol; ReMOTe COnTROl
2 8 Remote ContRol ReMOTe COnTROl INPUT EXIT GUIDE BACK 1 4 7 WIDE MENU OK VOL VOL CH CH 3 6 9 — 2 5 8 0 inPut Change the currently-displayed input. aRRow Navigate the on-screen menu. exit Close the on-screen menu. wide Switch the display mode. mute Turn the audio off or on. BaCk Go to the previous ...
Page 15 - Replacing the Batteries; Insert two batteries into the remote control. Make sure that
2 9 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
Page 16 - Connecting Your Devices; ConneCting A DeviCe; Game Console; BACK OF TV; BETTER
3 10 Connecting Your Devices ConneCting A DeviCe Game Console Cable/Satellite Box DVD/Blu-ray Player Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). 2. Turn the TV and your device of...
Page 17 - GOOD; CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES
3 11 COAXIAL CABLE Coaxial cables are are the traditional way of connectiong antennas and cable television signals to your TV. Coaxial cables carry both audio and video signals through a single connector. AV CABLE AV cables (or Composite cables) are the traditional way of connecting your devices to ...
Page 19 - ConneCting An AuDio DeviCe
3 13 ConneCting An AuDio DeviCe Home Audio Receiver VIZIO Sound Bar Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, RCA, etc). 2. Turn the TV and your audio device off. 3. Connec...
Page 20 - HDMi CABLe; • CFC 2-way Communication; CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES; RCA CABLE
3 14 HDMi CABLe HDMI technology transmits crystal-clear digital multi-channel surround audio through a single HDMI cable. Audio Return Channel- enabled (ARC) TVs allow audio to be sent over an already connected HDMI cable, eliminating the need for a separate audio cable. See Connecting an Audio Devi...
Page 21 - CONNECTING AN AUDIO DEVICE - ARC
3 15 Without HDMI ARC With HDMI ARC CONNECTING AN AUDIO DEVICE - ARC HDMI HDMI Your Home Audio Receiver Your Blu-Ray Player Your TV HDMI HDMI Your Home Audio Receiver Your Blu-Ray Player Your TV With an HDMI ARC setup, the audio connection between your TV and Home Audio Receiver can be removed. The ...
Page 22 - Completing the First-Time Setup
4 16 Completing the First-Time Setup The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV ready for use. Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. ...
Page 23 - Using the On-Screen Menu; VIZIO; NavigatiNg the ON-ScreeN MeNu
5 17 Using the On-Screen Menu Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the MENU button on the remote. You can also open the on-screen menu by pressing the VIA button and selecting HDTV Settings from the VIA Dock, then pressing OK . From this menu, you can: • ...
Page 25 - adjuStiNg the picture SettiNgS
5 19 adjuStiNg the picture SettiNgS Your TV display can be adjusted to suit your preferences and viewing conditions. To adjust the picture settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Picture and press OK . The...
Page 32 - adjuStiNg the audiO SettiNgS
5 26 adjuStiNg the audiO SettiNgS To adjust the audio settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK . The AUDIO menu is displayed. 3. Use the Arrow buttons to highlight the setting you wish to...
Page 33 - activatiNg the Sleep tiMer
5 27 Resetting the Audio Settings To reset the audio settings to the factory default settings: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK . The Audio menu is displayed. 3. Use the Arrow buttons to hi...
Page 34 - SettiNg up the tuNer
5 28 Setting the Auto Power Off Feature To help save energy, your TV is set by default to turn off after 10 minutes if no signal is being displayed on the screen. This feature can be deactivated. To set the Auto Power Off feature: 1. From the SLeeP TIMer menu, use the Up/Down Arrow buttons on the re...
Page 38 - SettiNg up clOSed captiONiNg
5 32 SettiNg up clOSed captiONiNg Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. The Closed Captioning menu only appears when the input is an antenna for Over-the-Air signals, cable TV directly from the wall (no ca...
Page 39 - Closed caption text sample
5 33 • Window Color - Change the color of the closed captioning box. • Window Opacity - Change the opacity of the closed captioning box 4. When you are satisfied with the appearance of the closed captions, press the EXIT button on the remote. In the example below, the closed caption text is green, t...
Page 40 - SettiNg up deviceS
5 34 SettiNg up deviceS To make it easier to recognize the different devices attached to the inputs on your TV, you can rename the inputs. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player”. To change the name of an input: 1. Pre...
Page 41 - chaNgiNg the tv SettiNgS
5 35 chaNgiNg the tv SettiNgS Using the settings menu, you can: • View system information• Set up parental controls• Change the on-screen menu language • Set the time• Adjust the CeC settings• Adjust when the power indicator is illuminated • reset the TV settings & set up administrative controls...
Page 46 - uSiNg the reSet & adMiN MeNu
5 40 uSiNg the reSet & adMiN MeNu You can use the TV’s reset & Admin menu to: • restore the TV to its factory default settings • Start the Store Demo Help VIZIO Network Sleep Timer Input CC ABC Audio Wide Normal Picture Settings Panoramic Wide Zoom 2D 3D Exit reSeT & ADMIN reset TV to Fa...
Page 47 - uSiNg the guided Setup MeNu
5 41 uSiNg the guided Setup MeNu Using Guided Setup The TV’s Setup App can be used to easily set up the TV tuner or to connect the TV with your network. To use guided setup: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Highlight Guided Setup and press OK . 3. Highlight...
Page 48 - uSiNg the iNfO WiNdOW; Oliver’s Holiday Surprise; he’ll encounter on the way?; Program Description; Channel/Input Information
5 42 uSiNg the iNfO WiNdOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote: • Press the INFO or GUIDE button one time to display channel, input, and display information. • Press the INFO or GUIDE button two times to display the program title, program rating, audio...
Page 49 - Using the USB Media Player; USing the USB Media Player
6 43 Using the USB Media Player USing the USB Media Player The USB Media Player allows you to connect a USB thumb drive to your TV and view photos. Connecting a USB thumb drive to the tV 1. Turn the TV off. Connect your USB thumb drive to the USB port on the back of the TV. 2. Press the Power/Standb...
Page 51 - Troubleshooting & Technical Support; do you have questions?; youR PRoduCt inCLudes FRee LiFetiMe teCh suPPoRt; hours of operation:; We speak English • Se habla Español • Nous parlons Français
A Troubleshooting & Technical Support do you have questions? Let us heLP! youR PRoduCt inCLudes FRee LiFetiMe teCh suPPoRt Phone: email: Web: (877) 878-4946 (toLL-FRee) [email protected] www.viZio.com/support hours of operation: Monday - Friday: 5 aM to 8 PM (Pst) saturday - sunday: 7 aM to ...
Page 54 - Specifications; DLED; Component Video Inputs:; Optical Digital
B 48 Specifications E320-B0 Screen Size: 32” Class Viewable Area: 31.50” Dimensions w/ Stand: w/o Stand: 28.43” x 18.55” x 6.87” 28.43” x 16.83” x 2.48” Weight w/ Stand: w/o Stand: 9.92 lbs 9.26 lbs TV Type: DLED Refresh Rate: 60 Hz Maximum Resolution: 1366 x 768 Pixel Pitch: .510 mm x .510 mm Respo...
Page 55 - Ambient Light Sensor:; Yes; Remote Control Model:; Energy Star
B 49 E320-B0 OSD Language: English, Spanish, French Ambient Light Sensor: Yes Remote Control Model: XRT020 Certifications: CSA, CSA-US, FCC Class B, HDMI, Dolby digital Compliance: Energy Star Voltage Range: 108~132V @ 50/60 Hz Power Consumption: 29.8W Standby Power: <1W
Page 56 - Limited Warranty
C 50 Limited Warranty ON PARTS AND LABOR Covers units purchased as new in United States and Puerto Rico Only. VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety (90) days of...
