Vision Fitness T9700HRT - Manual
Vision Fitness T9700HRT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
HARDW
ARE INCLUDED
Screwdriver
TOOLS, HARDW
ARE, & P
A
R
TS INCLUDED
P
A
R
TS BOX
W
ater Bottle, Qty: 1
Hear
t Rate Chest Strap, Qty: 1
Color-coded Hardware Bags
Owner’
s Guide
Assembly Guide
W
a
rranty Card
8
MM
Allen W
rench
ORANGE BAG
BLUE BAG
M8 x 135L Bolts
Quantity: 4
M8 x 15L Bolts
Quantity: 4
Assembly
Guide
T9500HR
T
AND
T9700HR
T
PLA
TFORM TREADMILLS
©
2004 V
ision Fitness. All Rights Reser
ved. 8.03 Par
t #Z92TM49-AG1812PRD
AG18.12PRD
REV3 Mar
.03.04
M8 x 55L Flathead Bolts
Quantity: 4
YELLOW BAG
M4 x 12L Panhead Screws
Quantity: 6
M8 x 20L Bolts
Quantity: 2
5mm L-Shaped W
rench
4
STEP
Once the treadmill is plugged in, you need to per
for
m
an Auto-Calibration to assure maximum per
for
mance.
MODELS T9500HR
T:
DO NOT ST
AND ON THE BEL
T WHEN PERFORMING THE AUTO-CALIBRA
TION
• Y
ou need to access User Engineering Mode to run the Auto-Calibration. With the Safety Key in place, please
hold down SPEED DOWN and SELECT for 5 seconds. When in the User mode, "USEr" displays in the center
window
. T
o access the data press the ELEV
A
TION keys until "Auto" appears in the center window
. Press Star
t to
select this function.
• T
o begin Auto-Calibration, press ST
AR
T.
The treadmill will run through minimum and maximum Speed and
maximum Elevation. This will take 3-5 minutes. Let the treadmill per
for
m
this complete function before exiting the
Engineering Mode.
• Elevation A/D or Elevation in % appears in the left window
. PWM value or Speed appears in the right
window
. "End" will appear in the center window when the Auto-Calibration is complete. When Auto-Calibration
is complete, it will take the treadmill about 30 seconds to go to 0% Elevation and retur
n to the star
t-up screen
with “P1” showing in the Function window
.
MODELS T9700HR
T:
DO NOT ST
AND ON THE BEL
T WHEN PERFORMING THE AUTO-CALIBRA
TION
• Y
ou need to access User Engineering Mode to run the Auto-Calibration. With the Safety Key in place, please
hold down SPEED DOWN and SELECT for 5 seconds. When in the User mode, "User Mode" appears in the
alphanumeric window
. T
o access the data press the ELEV
A
TION keys until "Auto-Cal" appears. Press Star
t to select
this function.
• T
o begin Auto-Calibration, press ST
AR
T.
The treadmill will run through minimum and maximum Speed and
maximum Elevation. This will take 3-5 minutes. Let the treadmill per
for
m
this complete function before exiting the
Engineering Mode.
• Elevation A/D or Elevation in % appears in the left window
. PWM value or Speed appears in the right
window
. "Cal Passed" will appear in the alphanumeric window when the Auto-Calibration is complete. The
treadmill will come to a complete stop and retur
n to the star
t-up screen in the alphanumeric window
.
AUTO CALIBRA
TION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
