Ultra 93900 - Manual
Ultra 93900 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Package Contents; UltraATA 133 PCI adapter; Layout; Hardware Installation
- Page 3 – Device Connection
- Page 4 – Driver Installation; UltraATA 133 PCI drivers for the following operating
- Page 5 – Computer and click Properties. Select Device
- Page 6 – Windows ME; Computer, then click Properties. Select Device; To Verify Windows 98SE/ME Installation; Image SiI 0680 ATA/133 Controller should be listed.
- Page 7 – SiI 0680 ATA/133 Controller and restart your system.
- Page 8 – To Verify Windows NT 4.0 Installation; Controller from SCSI Adapters listing and click; Properties. A message This device is working properly
- Page 10 – Controller to display driver properties.; Bios Configuration
- Page 11 – Technical Support and Warranty; Q U E S T I O N S ? S I I G ’ s O n l i n e S u p p o r t h a s a n s w e r s !
1
UltraATA 133 PCI
Quick Installation Guide
04-0233D
Introducing the UltraATA 133 PCI
The UltraATA 133 PCI is an ultra high-speed dual channel
Ultra ATA/133 controller board for use in Pentium-class
computer.
Features and Benefits
•
Compliant with UltraDMA6 ATA/133 specifications
•
Compliant with PCI v2.2 Plug-n-Play
•
Provides two independent Ultra ATA channels
(built-in 256-byte FIFOs per channel)
•
Full ACPI power management support
•
Supports Ultra DMA 0-6 and Multi-word DMA 0-2
•
Breaks the 137GB barrier! Supports hard drives
larger than 137GB
•
Coexists with on-board controller
•
CRC (Cyclical Redundancy Check) error-checking
provides data verification and achieves flawless
data tranfer
•
Flash BIOS for easy upgrade
•
Achieves burst data transfer rates up to 133MB/sec
•
Works with various brand, capacity hard disk drives
and ATAPI devices
System Requirements
•
Pentium-class computer with an available PCI slot
•
Windows 98SE/ME/NT 4.0/2000/XP/Server 2003
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents • UltraATA 133 PCI adapter • Driver diskette • 40-pin/80-wire Ultra ATA cable • This quick installation guide Layout IDE1 IDE2 Jumper On (do not remove) Pin1 Pin1 HDD Activity LED Figure 1. UltraATA 133 PCI RAID layout Hardware Installation General instructions for installing the ...
3 1. Turn OFF the power to your computer and any other connected peripheral devices. 2. Unplug the power cord from the back of the computer. 3. Remove your computer’s cover. 4. Remove the slot bracket from an available PCI slot. 5. To install the card, carefully align the card's bus connector with t...
4 4. The Ultra ATA ribbon cable has two connectors. If you install only one drive, connect it to the end connector of the cable. On the other hand, if you install two drives, connect the master drive to the end connector of the cable and the slave drive in the middle connector. Figure 2. Connecting ...
