Turboair TBC-80SD, 80SB - Manual

Turboair TBC-80SD, 80SB

Turboair TBC-80SD, 80SB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
Page: / 13

Table of Contents:

  • Page 2 – Horizontal Bottle Cooler; CONTENTS; MODEL; SERIAL NUMBER
  • Page 3 – INSTALLATION OF THE BOTTOM SHELVES
  • Page 4 – INSTALLATION OF THE DIVIDERS; ) Spring in back of divider point ‘C’ will be shorten to about 1/2 inch.
  • Page 5 – INSTALLATION OF THE OPENER KIT; ) On the front outside wall of bottle cooler, there are screws.
  • Page 6 – Grip the bottle tightly so it will not fall on removing cap.; HOW TO USE THE BOTTLE OPENER
  • Page 7 – GOOD AIR CIRCULATION; the cabinet and contents.; DO NOT PLACE NEAR HEAT; - Make sure the unit is installed in a stable condition.; Do not plug in with other units on same breaker.; INSTALLATION
  • Page 8 – CLEANING; POSITIONING DRINKS; CAUTION; Before cleaning, turn unit off at power switch.; CLEANING THE INTERIOR AND EXTERIOR
  • Page 9 – BASIC OPERATION; Set toward “1” for warmer temperature and “7” for colder temperature.; REFRIGERATORS
  • Page 10 – BEFORE REQUESTING SERVICE; SYMPTOMS; There is a loud noise.; The following points are not malfunctions:; • A water-flowing sound can be heard when the compressor stops.
  • Page 11 – Warranty Claims; Warranty
  • Page 12 – What Is Not Covered By This Warranty
Loading the manual

Turbo air Speeds Up the Pace of Innovation

Horizontal Bottle Cooler
Installation and Operation Manual

Please read this manual completely before attempting to install or operate this equipment!

TBC-24SD, 24SB / TBC-36SD, 36SB / TBC-50SD, 50SB /
TBC-65SD, 65SB / TBC-80SD, 80SB / TBC-95SD, 95SB

SD series: Stainless Steel Exterior
SB series: Black Laminated Vinyl Exterior or Black Powder Coating Exterior
(This picture shows TBC-50SD in the SD series.)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Horizontal Bottle Cooler; CONTENTS; MODEL; SERIAL NUMBER

SPECIFICATIONS ........................................................................................... 2 SERIAL NUMBER ............................................................................................ 2 INSTALLATION OF THE BOTTOM SHELVES ..................................................

Page 3 - INSTALLATION OF THE BOTTOM SHELVES

3 Turbo air * Note: The size and quantities of the bottom shelves can be different according tomodel number. INSTALLATION OF THE BOTTOM SHELVES 1) Before adding cans or bottles to cooler, please install bottom shelves. 2) Then install dividers. (see page 4)

Page 4 - INSTALLATION OF THE DIVIDERS; ) Spring in back of divider point ‘C’ will be shorten to about 1/2 inch.

4 Turbo air INSTALLATION OF THE DIVIDERS 1) To re-position divider, push back wards. 2) Spring in back of divider point ‘C’ will be shorten to about 1/2 inch. 3) Front of divider will be able to remove from point ‘A’ and ‘B’. 4) Position divider in the hole, point ‘C’ where you would like it. 5) Pus...

Other Turboair Models

All Turboair Other