Page 2 - The control panel; Programme selector dial; Description of the appliance
2 The control panel 1. On/Off push button 2. Programme guide 3. Programme marker 4. Programme selector dial Description of the appliance 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Salt container 5. Lower spray arm 6. Detergent dispenser 7. Control panel 8. Rating plate...
Page 3 - Washing programmes
3 Washing programmes Programme Degree of soil and type of load Require push button Starting position of the programme selector Recommended quantity of detergent Wash Prewash Normal soilCrockery and cutlery Light soilCrockery and cutlery Light soilCrockery and partycrockery Any.Partial load (to becom...
Page 4 - Operating sequence
4 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Check that there is rinse aid and salt 3. Load the dishes Remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket ...
Page 5 - Using your appliance
5 Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through the baskets. The lower basket The lower basket is designed to take saucepans, lids,plat...
Page 6 - The upper basket
6 The upper basket The upper basket is designed for plates (dessert plates,saucers, dinner plates of up to 25 cm in diameter), saladbowls, cups and glasses. Arrange items on and underneath the cup rack so that watercan reach all surfaces. Light items (plastic bowls etc.) should be loaded in the uppe...
Page 7 - Technical specifications; Hints for test centres
Dimensions Width 59.6 cm Height 81.8 - 87.8 cm Max depth 55.5 cm Max depth with open door 111.4 cm Electrical connection Voltage 220/240 V - 50 Hz Motor rating during wash 200 W Power of heating element 2100 W Overall power 2300 W Water supply pressure Minimum 50 kPa (0.5 bar) Maximum 800 kPa (8 bar...
Page 8 - Instruction Book; Contents; Guide to use the instruction book; Safety instructions; DISHWASHER
Instruction Book - Before use - Maintenance - Installation 1 Contents Important safety information 2 Before use 3 Setting the water softener 3 Filling with salt 4 Filling with rinse aid and adjusting the dose 5 Use of detergent 6 Hints and tips 7 Maintenance and cleaning 8 Internal cleaning 8 Cleani...
Page 9 - During Use; Conservation; In the interest of the environment:; Important safety information
Installation ● This appliance is heavy. Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way. ● Care must be taken to ensure that the appliance does not stand on the electrical supply cable. ● Any electrical work required to ...
Page 10 - Before use; Setting the water softener; To adjust the water softener
3 Before use Before using your dishwasher for the firsttime: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with...
Page 11 - Filling with salt
4 Filling with salt Attention!Only use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener.Only fill with salt just before starting a washing programme. This will prevent any ...
Page 12 - Adjusting the dose
5 Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, and spot and streak free drying.The dispenser, which is positioned inside the door, holdsabout 110 ml of rinse aid, which is sufficient for 16 - 40dishwashing programmes, depending upon the dosagesetting. F...
Page 13 - Use of detergent; Compact detergents with enzymes
6 Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which areavailable in the following options: Finish Double Action Tablets. Each tablet has the exactamount of detergent required, simply place in the dispenser. Finish Powde...
Page 14 - Hints and tips
7 To save energy Place dishes in the machine immediately after every mealand wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see"Washing Programmes" chart) so that any food scraps donot become caked on the dishes while you are waiting torun th...
Page 15 - Maintenance and cleaning
8 Internal cleaning Ensure that the seals around the door, the detergent andrinse aid dispensers are cleaned regularly with a damp cloth.We recommend the use of Finish Dishwasher Cleanerevery 3 months or run a 65°C wash without dishes usingdetergent. Regular use of Finish Dishwasher Cleanercleans in...
Page 16 - Something not working; Symptom
9 Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out anengineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Important: If you call out an engineer to a fault list...
Page 17 - Levelling; Installation
min 30 cm max 100 cm min 4 cm Ø 21 Ø 18 CS09 2 3 1 max 100 cm 10 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent...
Page 18 - Electrical connection
11 The waste connection must be at a height of between 30 cm(minimum) and 100 cm (maximum) from the bottom of thedishwasher. The drain hose can face either to the right or left of thedishwasher Ensure the hose is not bent or squashed as this couldprevent or slow down the discharge of water. If you u...
