Transcend USB JetFlash - Manual

5 Driver Installation for Linux Kernel 2.4 or Later No driver is required. Just plug JetFlash into the USB port and mount it. Example: 1. Create directory of /mnt/JetFlash first: mkdir /mnt/JetFlash 2. mount JetFlash : mount –a –t msdos /dev/sda1 /mnt/JetFlash Data Storage After installing the drive...

6 Uninstall 1. Put the Driver CD into the CD-ROM (Auto-Run supported). Click Win98 Driver button. 2. Click OK to continue. How to Unplug JetFlash Safely Before removing JetFlash , please make sure the LED is not flashing! If you remove JetFlash while the LED is flashing, unpredictable damage to the ...

8 Product Overview REC Button PLAY/PAUSE Button Record LED Power/Play LED Repeat LED USB Connector Cover HOLD Switch Microphone Earphone Jack Track Control Wheel Volume Control Wheel Basic Operation Enter MP3 Mode 1. Disconnect JetFlash from your computer. 2. Press and hold the PLAY/PAUSE button for...

10 Repeat All Tracks Press the Track Control Wheel when the Repeat LED is on, or press the Track Control Wheel twice when the Repeat LED is off. The Repeat LED blinks orange. ™ To resume normal playback, press the Track Control Wheel again. Repeat a Portion of One Track (AB Repeat) 1. Press the Volu...

11 To Play MP3 Music 1. Make sure you have downloaded MP3 or WMA files to the root directory of your JetFlash . 2. Disconnect JetFlash from your computer. 3. Connect the earphone with the earphone jack . 4. Set HOLD switch to “ OFF ” position. 5. Press and hold the PLAY/PAUSE button for a few second...

12 4. Press and hold the REC button for a few seconds to enter Record mode. The Record LED turns red. 5. Press the REC button. The Record LED blinks red and voice recording starts. 6. Press the REC button to stop voice recording when you wish to stop. 7. Press the REC button to start voice recording...

13 LED Indication Record LED (Red) Power/Play LED (Green) Repeat LED (Orange) Status off off off Power off off fast blink off Data transfer off on off Power on (in MP3 mode) off normal blink off Play MP3 music off normal blink on Repeat a track off normal blink normal blink Repeat all tracks off nor...

16 remains unchecked. Click Start to initiate the low-level format. 10. Complete message appears. Click Close to complete the Recovery procedures. 11. Release the PLAY/PAUSE button. JetFlash has been returned to its initial status for your usage.

17 To Recover JetFlash in Windows Me, 2000, and XP ™ Skip steps 1-3 if the Utility program has already been installed. 1. Put the Driver CD into the CD-ROM (Auto-Run supported) and click the Utility button on the JetFlash splash screen. 2. SigmaTel MSCN Audio Player Setup window appears. Click Next ...

22 16. Complete message box appears. Click Close to complete the Recovery procedures. 17. Release the PLAY/PAUSE button. JetFlash has been returned to its initial status for your usage.

23 Troubleshooting Q1: Why doesn’t the driver CD Auto-Run after it is inserted into the CD-ROM drive in Windows? A1: This problem usually occurs because the Auto-Insert function of the CD-ROM drive is disabled. Please enter Device Manager in Control Panel and enable the Auto-Insert function of the C...

26 Specifications • Size: 97 mm × 31 mm × 18 mm • Weight: 25 g (without battery) • Data retention: Up to 10 years • Shock resistance: 1000 G (maximum) • Erase cycles: 1,000,000 times • Signal-to-Noise Ratio: 90dB • Output frequency: 20Hz–20KHz • Estimated battery life: 12 hours (alkaline battery) • ...

JetFlash Limited Warranty “Above and beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm. It’s all part of our commitment to Customer Satisfaction. All Transcend Information, Inc. (Transcend) produ...