Transcend TS128M~8GJF2A - Manual

Driver Installation for Windows Me, 2000, and XP No driver is required. These Windows operating systems have built-in drivers to support JetFlash . Simply plug JetFlash into an available USB port, and Windows will install the files needed to use your device. A new Removable Disk drive with a newly a...

2. Select Uninstall driver . Click Start to continue. 3. After Uninstall driver has been completed, click OK . To Safely Unplug JetFlash To Remove JetFlash in Windows 98SE Unplug JetFlash from your system directly when data is not being transferred. To Remove JetFlash in Windows Me, 2000, and XP 1. ...

System Requirements for the Boot-Up Function • • • A desktop or notebook computer that supports USB-ZIP or USB-HDD as the First Boot Device in BIOS Windows 98SE or Me on the C: drive Any anti-virus program present must be turned off Boot-Up Function is not supported for Mac or Linux Operating System...

Format Introduction JetFlash Product Number, Drive Letter and Capacity Information of Partitioned Disk 1 Disk-Volume bar. Use it to maketwo partitions and adjust thecapacity sizes. The minimumsize is 2MB. Information of Partitioned Disk 2 Progress bar Type of Format Quick: Erase and check blocks at ...

Configuration Slide the Disk-Volume bar to adjust the disk size of your JetFlash . You can make one disk or two disks by adjusting the volume sizes. The options will change automatically and enable your choice. Make an USB-ZIP startup disk: When the size of Disk 1 is set to be larger than 2MB. This ...

Option 2: Make an USB-HDD startup disk (Only for Windows 98SE) a. Select Type of format (Quick, Full or Configure device only) and Make USB-HDD startup disk option. Click Start to continue. b. After the completion of the format, you need to re-insert JetFlash to enable the settings. Restart your com...

Create Two Partitions Slide the Disk-Volume bar to adjust the size of Disk1 to fit your needs. The size of Disk2 will be changed automatically according to the size of Disk1 , as adjusted by the user. JetFlash can be setup to a USB-ZIP or USB-HDD boot-up mode as indicated below. Option Disk 1 Size D...

Security Function The Security Function is not supported by Mac or Linux Operating Systems. Security Function for Windows 98SE, Me, 2000, and XP Create Single Partition 1. You must run the mFormat Utility program on the JetFlash to enable this feature. This procedure will reformat the JetFlash and e...

Use of JetFlash with Security Function Enabled 1. Insert JetFlash and run the mFormat Utility program. Click the Login button . 2. Enter the correct password to access data on the secured disk. 3. When you finish, you need to safely remove JetFlash to protect data (procedure described as below). 4. ...

PC-Lock Function Once the PC-Lock function is enabled, you can use the JetFlash as a key to lock your computer, protecting it from being used by unauthorized persons. The PC-Lock function is not supported on Mac and Linux Operating Systems. To use the PC-Lock function, you must login into the Window...

Specifications Size: 75mm x 25mm x 11mm (Mini Size) 88mm x 33mm x 15mm (Normal Size) Weight: 15 g (Mini Size) 24 g (Normal Size) Data Retention: Up to 10 years Erase Cycles: ＞ 100,000 times Speed: Read 10.0 MB/sec (Max.) Write 8.0 MB/sec (Max.) Certificates: CE, FCC, BSMI Ordering Information Transc...

JetFlash Limited Warranty “Above and beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm. It’s all part of our commitment to Customer Satisfaction. All Transcend Information, Inc. (Transcend) produ...