Page 2 - COPYRIGHT & TRADEMARKS; Specifications are subject to change without notice.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form ...
Page 3 - FCC STATEMENT; Reorient or relocate the receiving antenna.; FCC RF Radiation Exposure Statement:
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...
Page 4 - 당해; NCC Notice & BSMI Notice; 注意!
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. Canadian Compliance Statement This device complies with Industry Canada l...
Page 5 - Safety Information
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам , що передбачені чинними законодавчими актами України . Safety Information When product has power button, the power button is one of the way to shut off the product; when there is n...
Page 6 - DECLARATION OF CONFORMITY; 00Mbps Wireless N Router; The product carries the CE Mark:
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: 300Mbps Wireless N Router Model No.: TL-WR841N/TL-WR841ND/TL-WR847N Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations appli...
Page 7 - CONTENTS
CONTENTS Package Contents..................................................................................................... 1 Chapter 1. Introduction......................................................................................... 2 1.1 Overview of the Router.................................
Page 10 - 00Mbps Wireless N Router User Guide; Package Contents; The following items should be found in your package:
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 1 - Package Contents The following items should be found in your package: TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router Power Adapter for TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router Quick Installation...
Page 11 - Chapter 1. Introduction; Overview of the Router; Incredible Speed; TL-WR841ND Router with 2 detachable antennas
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 2 - Chapter 1. Introduction Thank you for choosing the TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router. 1.1 Overview of the Router The TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router integrates 4-port Switch, Fir...
Page 12 - Supports Virtual Server, Special Application and DMZ host.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 3 - 1.3 Main Features Complies with IEEE 802.11n to provide a wireless data rate of up to 300Mbps. One 10/100M Auto-Negotiation RJ45 WAN port, four 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX. Provides ...
Page 13 - The Front Panel; Figure 1-1 Front Panel sketch; Name
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 4 - 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 Front Panel sketch The Router’s LEDs are located on the front panel (View from left to right). Name Status Indication Off Power is off. ( Power ) On Power is on. Flashing The R...
Page 14 - The Rear Panel; Figure 1-2 Rear Panel sketch; The switch for the power.; Used as RESET button:; function on; System Tools; page in the
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 5 - 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ON/OFF: The switch for the power. POWER: The Power socket is where you will connect the power a...
Page 15 - To receive and transmit the wireless data.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 6 - Used as WPS button: If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this button to quickly establish a connection between the Router and client devices and automa...
Page 16 - Chapter 2. Connecting the Router; System Requirements; TCP/IP protocol on each PC; Installation Environment Requirements; Avoid direct irradiation of any strong light (such as sunlight); Connecting the Router; electrical outlet. The Router will start to work automatically.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 7 - Chapter 2. Connecting the Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to ...
Page 19 - Chapter 3. Quick Installation Guide; Quick Setup; you need instructions as to how to do this, please refer to; command prompt; to verify the network connection; Enter; and the Router has been established well.; Figure 3-1 Success result of Ping command; and the Router is failed.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 10 - Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TL-WR841ND 300Mbps Wireless N Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default do...
Page 20 - Figure 3-2 Failure result of Ping command; Please check the connection following these steps:; Quick Installation Guide; Log in the Router; admin
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 11 - Figure 3-2 Failure result of Ping command Please check the connection following these steps: 1. Is the connection between your PC and the Router correct? Note: The 1/2/3/4 LEDs of LAN ports which you link to on the Router a...
Page 21 - Figure 3-4 Login Windows; After successfully log in, you can click the; menu to quickly configure your; Figure 3-5 Quick Setup; page after; Next; , the background will detect the Internet accessibility.; Wireless settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 12 - Figure 3-4 Login Windows Note: If the above screen does not pop-up, it means that your Web-browser has been set to a proxy. Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears, ca...
Page 22 - Figure 3-6 WAN Connection Type; function is not suitable for; Static IP; and; PPTP; , you need to specify the connection type manually.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 13 - Figure 3-6 WAN Connection Type The Router provides Auto-Detect function and supports five popular ways Dynamic IP , Static IP , PPPoE/Russia PPPoE , L2TP/Russia L2TP and PPTP/Russia PPTP to connect to the Internet. It’s recom...
Page 25 - Figure 3-12 Quick Setup – Wireless
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 16 - Figure 3-11 Quick Setup - PPTP/Russian PPTP User Name / Password - Enter the User Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP. ...
Page 26 - TEST; Figure 3-13 Quick Setup - More Advanced Wireless Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 17 - network. Considering your wireless network security, the default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address). This value is case-sensitive. For example, TEST is...
Page 27 - Click the; Finish; button to finish the
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 18 - Click the Finish button to finish the Quick Setup . Figure 3-14 Quick Setup - Finish
Page 28 - Chapter 4. Configuring the Router
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 19 - Chapter 4. Configuring the Router This chapter will show each Web page's key functions and the configuration way. 4.1 Login After your successful login, you will see the fifteen main menus on the left of the Web-based utility...
Page 29 - Figure 4-1 Router Status; Please refer to; WPS
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 20 - Figure 4-1 Router Status 4.3 Quick Setup Please refer to 3.2 Quick Installation Guide . 4.4 WPS This section will guide you to add a new wireless device to an existing network quickly by WPS (Wi-Fi Protected Setup) function. ...
Page 30 - Figure 4-3 Add A New Device
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 21 - Figure 4-2 WPS WPS Status - Enable or disable the WPS function here. Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the Router can be found in the label attached on the router. ...
Page 31 - successfully added to the network.; Figure 4-5 the Network menu
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 22 - Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 4: When the WPS LED is on, the client device has successfully connected to the Router. Step 5: Refer back to your cl...
Page 32 - WAN; Figure 4-6 WAN – Dynamic IP
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 23 - 4.5.1 WAN Choose menu “ Network → WAN ”, you can configure the IP parameters of the WAN on the screen below. 1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will automatically get IP pa...
Page 35 - Only when you have configured the system time on “; function can take effect.; Figure 4-9 PPPoE Advanced Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 26 - Note: Only when you have configured the system time on “ System Tools → Time ” page, will the Time-based Connecting function can take effect. Connect Manually - You can click the Connect / Disconnect button to connect/dis...
Page 38 - After a specified period of inactivity (; Figure 4-12 PPTP Settings; Enter the User Name and Password provided by your ISP. These
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 29 - enter the number of minutes you want to have elapsed before your Internet connection terminates. Connect Automatically - Connect automatically after the Router is disconnected. To use this option, check the radio button. ...
Page 39 - button to allow; PPPoE; Connections which use dynamic IP address assignment.; Connections which use static IP address assignment.; MAC Clone
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 30 - Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name. If you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. An...
Page 40 - Figure 4-13 MAC Address Clone; Only the PC on your LAN can use the MAC Address Clone function.; LAN; server will change accordingly at the same time
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 31 - Figure 4-13 MAC Address Clone Some ISPs require that you register the MAC Address of your adapter. Changes are rarely needed here. WAN MAC Address - This field displays the current MAC address of the WAN port. If your ISP r...
Page 41 - Figure 4-15 Wireless menu; Wireless Settings; Figure 4-16 Wireless Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 32 - 4.6 Wireless Figure 4-15 Wireless menu There are five submenus under the Wireless menu (shown in Figure 4-15): Wireless Settings , Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click an...
Page 42 - If; Mode
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 33 - When you select your local region from the drop-down list, click the Save button , then the Note Dialog appears. Click OK . Note Dialog Note: Limited by local law regulations, version for North America does not have region ...
Page 43 - Wireless Security
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 34 - Figure 4-17 SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a client. You can also use the search function to select the SSID to join. BSSID(to be bridged) - The BSSID of the AP your Router ...
Page 44 - Figure 4-18 Wireless Security; If you check the
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 35 - Figure 4-18 Wireless Security Disable Security - If you do not want to use wireless security, check this radio button. But it’s strongly recommended to choose one of the following modes to enable security. WPA/WPA2 - Pers...
Page 45 - WPA /WPA2 – Enterprise; radio button and choose TKIP encryption, you
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 36 - Figure 4-19 Wireless Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64 Hexadecimal characters. Group Key Update Period - Specify the group key update interval in seconds. The value should be...
Page 46 - Wireless MAC Filtering; Figure 4-22 Wireless MAC Filtering
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 37 - Type - you can choose the type for the WEP security on the drop-down list. The default setting is Automatic , which can select Shared Key or Open System authentication type automatically based on the wireless station's capa...
Page 47 - Figure 4-23 Add or Modify Wireless MAC Address Filtering entry
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 38 - Figure 4-23 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instructions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC ...
Page 48 - Wireless Advanced; Wireless
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 39 - 4.6.4 Wireless Advanced Choose menu “ Wireless → Wireless Advanced ”, you can configure the advanced settings of your wireless network. Figure 4-24 Wireless Advanced Transmit Power - Here you can specify the transmit power ...
Page 49 - Wireless Statistics; Figure 4-25 Wireless Statistics; This page will be refreshed automatically every 5 seconds.; DHCP Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 40 - Note: If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values; otherwise it may result in lower wireless network performance. 4.6.5 Wireless Statistics Choo...
Page 50 - Figure 4-27 DHCP Settings; DHCP Client List; Figure 4-28 DHCP Clients List
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 41 - Figure 4-27 DHCP Settings DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. Start IP Addres...
Page 51 - Address Reservation; Figure 4-29 Address Reservation
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 42 - Assigned IP - The IP address that the Router has allocated to the DHCP client Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired, a new dynamic IP address will be automatically assig...
Page 52 - Figure 4-31 The Forwarding menu; Virtual Servers
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 43 - 4.8 Forwarding Figure 4-31 The Forwarding menu There are four submenus under the Forwarding menu (shown in Figure 4-31), Virtual Servers , Port Triggering , DMZ and UPnP . Click any of them, and you will be able to configure ...
Page 53 - Figure 4-33 Add or Modify a Virtual Server Entry; Security; ” page to be any other value except 80 such as 8080.; Port Triggering
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 44 - 3. Type the IP Address of the computer in the IP Address box. 4. Select the protocol used for this application, either TCP , UDP , or All . 5. Select the Enable to enable the virtual server. 6. Click the Save button. Figure 4...
Page 55 - Figure 4-35 Add or Modify a Port Triggering Entry; connection of other hosts on LAN will be refused.; DMZ
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 46 - Figure 4-35 Add or Modify a Port Triggering Entry To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete . 2. Modify the information. 3. C...
Page 56 - UPnP; Figure 4-38 The Security menu
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 47 - 3. Click the Save button. Note: After you set the DMZ host, the firewall related to the host will not work. 4.8.4 UPnP Choose menu “ Forwarding → UPnP ”, you can view the information about UPnP (Universal Plug and Play) in ...
Page 57 - Basic Security; Figure 4-39 Basic Security
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 48 - 4.9.1 Basic Security Choose menu “ Security → Basic Security ”, you can configure the basic security in the screen as shown in Figure 4-39. Figure 4-39 Basic Security Firewall - A firewall protects your network from the out...
Page 58 - Advanced Security; Dos Protection will take effect only when the; Traffic Statistics; in “; System Tool
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 49 - TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep the default Enable . H323 ALG - To allow Microsoft NetMeeting clients to communicate across NAT, keep the default Enable . RTSP ALG - To all...
Page 59 - Local Management; Figure 4-41 Local Management
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 50 - ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the Router will startup the blocking function immediately....
Page 60 - Remote Management; Figure 4-42 Remote Management; in your browser. Later, you may be asked; Parental Control
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 51 - After click the Add button, your PC's MAC Address will be placed in the list above. Click the Save button to save your settings. Note: If your PC is blocked but you want to access the Router again, use a pin to press and ho...
Page 61 - Figure 4-43 Parental Control Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 52 - Figure 4-43 Parental Control Settings Parental Control - Check Enable if you want this function to take effect, otherwise check Disable . MAC Address of Parental PC - In this field, enter the MAC address of the controllin...
Page 62 - Figure 4-44 Add or Modify Parental Control Entry
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 53 - Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-44 Add or Modify Parental Control Entry For example : If you desire that the children’s PC with MAC address 00-1...
Page 63 - Figure 4-45 Parental Control Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 54 - Figure 4-45 Parental Control Settings 4.11 Access Control Figure 4-46 Access Control There are four submenus under the Access Control menu as shown in Figure 4-46: Rule , Host , Target and Schedule . Click any of them, and yo...
Page 64 - Figure 4-48 Quick Setup – Create a Host Entry
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 55 - Schedule - Here displays the schedule selected in the corresponding rule. Status - This field displays the status of the rule. Enabled means the rule will take effect, Disabled means the rule will not take effect. Modif...
Page 66 - Figure 4-52 Add Internet Access Control Entry
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 57 - Figure 4-51 Quick Setup – Create an Internet Access Control Entry Rule - In this field, create a name for the rule. Note that this name should be unique (e.g. Rule_1). Host - In this field, select a host from the drop-dow...
Page 67 - Figure 4-53 Host Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 58 - For example : If you desire to allow the host with MAC address 00-11-22-33-44-AA to access www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the LAN to access the Internet, you should f...
Page 68 - Figure 4-54 Add or Modify a Host Entry
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 59 - To add a new entry, please follow the steps below. 1. Click the Add New… button. 2. In the Mode field, select IP Address or MAC Address. If you select IP Address, the screen shown is Figure 4-54. 1) In Host Description fiel...
Page 69 - Figure 4-56 Target Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 60 - 4.11.3 Target Choose menu “ Access Control → Target ”, you can view and set a Target list in the screen as shown in Figure 4-56. The target list is necessary for the Access Control Rule. Figure 4-56 Target Settings Target D...
Page 70 - Figure 4-57 Add or Modify an Access Target Entry; only, you should first follow the
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 61 - Figure 4-57 Add or Modify an Access Target Entry Figure 4-58 Add or Modify an Access Target Entry For example : If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA in the LAN to access...
Page 71 - Figure 4-59 Schedule Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 62 - Figure 4-59 Schedule Settings Schedule Description - Here displays the description of the schedule and this description is unique. Day - Here displays the day(s) in a week. Time - Here displays the time period in a day....
Page 72 - Advanced Routing; Figure 4-61 Advanced Routing Menu
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 63 - 2. In Schedule Description field, create a unique description for the schedule (e.g. Schedule_1). 3. In Day field, check the Select Days radio button and then select Sat and Sun. 4. In Time field, enter 1800 in Start Time fie...
Page 74 - Bandwidth Control; Figure 4-65 Bandwidth Control Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 65 - 4.13 Bandwidth Control Figure 4-64 There are two submenus under the Bandwidth Control menu as shown in Figure 4-64. Click any of them, and you will be able to configure the corresponding function. The detailed explanations fo...
Page 75 - Figure 4-67 Bandwidth Control Rule Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 66 - Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. Ingress bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default ...
Page 76 - Figure 4-69 Binding Settings
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 67 - Figure 4-69 Binding Settings MAC Address - The MAC address of the controlled computer in the LAN. IP Address - The assigned IP address of the controlled computer in the LAN. Bind - Check this option to enable ARP bindin...
Page 77 - Figure 4-72 ARP List
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 68 - Figure 4-71 Find IP & MAC Binding Entry Click the Enable All button to make all entries enabled. Click the Delete All button to delete all entries. 4.14.2 ARP List To manage the computer, you could observe the computers i...
Page 80 - System Tools; Figure 4-76 The System Tools menu
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 71 - Connection Status - The status of the DDNS service connection is displayed here. Click Logout to log out the DDNS service. 4.16 System Tools Figure 4-76 The System Tools menu Choose menu “ System Tools ”, and you can see the ...
Page 83 - function. Option “Tracert Hops” are used for; Tracert; Figure 4-80 Firmware Upgrade
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 74 - Figure 4-79 Diagnostic Results Note: Only one user can use this tool at one time. Options “Number of Pings”, “Ping Size” and “Ping Timeout” are used for Ping function. Option “Tracert Hops” are used for Tracert function. 4....
Page 84 - ) The Router will reboot after the upgrading has been finished.; Figure 4-81 Restore Factory Default
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 75 - 3) Do not turn off the Router or press the Reset button while the firmware is being upgraded, otherwise, the Router may be damaged. 4) The Router will reboot after the upgrading has been finished. 4.16.4 Factory Defaults Choo...
Page 85 - Figure 4-83 Reboot the Router
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 76 - 4.16.6 Reboot Choose menu “ System Tools → Reboot ”, you can click the Reboot button to reboot the Router via the next screen. Figure 4-83 Reboot the Router Some settings of the Router will take effect only after rebooting, w...
Page 86 - Choose menu “; Figure 4-85 System Log; Indicates whether auto mail feature is enabled or not.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 77 - 4.16.8 System Log Choose menu “ System Tools → System Log ”, you can view the logs of the Router. Figure 4-85 System Log Auto Mail Feature - Indicates whether auto mail feature is enabled or not. Mail Settings - Set the r...
Page 87 - Only when you select; Authentication; , do you have to enter the User Name and Password in; Figure 4-87 Statistics
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 78 - From - Your mail box address. The Router would connect it to send logs. To - Recipient’s address. The destination mailbox where the logs would be received. SMTP Server - Your smtp server. It corresponds with the mailbox...
Page 93 - Figure A-9 Virtual Servers; The wireless stations cannot connect to the Router.; of your wireless stations.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 84 - Figure A-9 Virtual Servers Figure A-10 Add or Modify a Virtual server Entry 5. The wireless stations cannot connect to the Router. 1) Make sure the " Enable Wireless Router Radio " is checked. 2) Make sure that the wi...
Page 94 - Appendix B: Configuring the PC; Start; button, and then click; Control Panel; the; Network and Internet Connections; icon, and then click on the; Network; tab in the appearing window.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 85 - Appendix B: Configuring the PC In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary. 1....
Page 97 - Now click; OK; to keep your settings.
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 88 - Now click OK to keep your settings.
Page 98 - Appendix C: Specifications; General
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 89 - Appendix C: Specifications General Standards IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g and IEEE 802.11n Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Ports One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M A...
Page 99 - Appendix D: Glossary
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 90 - Appendix D: Glossary 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via s...
Page 100 - ireless
TL-WR841N/TL-WR841ND/TL-WR847N 300Mbps Wireless N Router User Guide - 91 - Wi-Fi - A trade name for the 802.11b wireless networking standard, given by the Wireless Ethernet Compatibility Alliance (WECA, see http://www.wi-fi.net), an industry standards group promoting interoperability among 802.11b...