Toshiba MK2018GAP- User Manual
Toshiba MK2018GAP– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CONTENTS
- Page 3 – General Features
- Page 4 – Caution; Master/Slave Settings; Figure 1.HDD Jumper Locations; JUMPER
- Page 5 – Configure drive for system application.; oles
- Page 6 – Backing up Data Files
- Page 9 – Physical; typ
- Page 10 – Figure 1.MK2018GAP HDD Rear View - Connectors; Interface Connector; * cable is not included with drive
TOSHIBA AMERICA INFORMATION SYSTEMS
STORAGE DEVICE DIVISION
IRVINE, CALIFORNIA
MK2018GAP (HDD2164)
2.5-INCH HARD DISK DRIVE
USER MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CONTENTS Introduction.............................................................................. 1 Setup ........................................................................................ 2 Using the HDD ......................................................................... 4 Troubleshoo...
1 INTRODUCTION – MK2018GAP (HDD2164) General Features • 2.5" sized drive • 1 Platter • 20 Gigabytes • 9.5mm High • 13ms Average Seek Time • ATA-2,3,4,5 Interface • Supports high transfer rates of 100MB/sec • 2MB Buffer • Rotational speed of 4,200rpm • MTTF 300,000 Hours
2 SETUP – MK2018GAP (HDD2164) Caution : Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Electronstatic discharge can also damage the drive. You should ground yourself prior to handling the drive. Master/Slave Settings Your Toshiba Hard Disk Drive c...
