Toro 20016 - Manual
Toro 20016 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Never; Service; Safe Handling of Gasoline
- Page 3 – Do not run the engine indoors or in an enclosed area.; General Service; Safety and Instructional Decals; Safety and instruction decals are located
- Page 4 – Setup; Unfolding the Handle; Filling the Engine with Oil
- Page 5 – Product Overview; Operation; Filling the Fuel Tank; To reduce starting problems next; Checking the Engine Oil Level; Add; Full
- Page 6 – Adjusting the Cutting Height; Stop the engine and wait for all moving parts to stop.; Adjusting the Handle Height
- Page 7 – When you release the blade control; Recycling the Clippings; Ensure that the rear discharge plug is in
- Page 8 – Bagging the Clippings; Installing the Grass Bag; Side-discharging the Clippings; Installing the Side Discharge Chute
- Page 9 – Removing the Side Discharge Chute; Lock the side discharge door after you; Operating Tips; General Mowing Tips
- Page 10 – Maintenance; Preparing for Maintenance; Before tipping the mower to change; Replacing the Air Filter
- Page 11 – Wear gloves when servicing the blade.
- Page 12 – Cleaning the Mower; Do not allow bystanders in the area.; Storage; Preparing the Mower for; Gasoline vapors can explode.; Folding the Handle
- Page 13 – Route the cables to the outside of the; Removing the Mower from
Form No. 3354-611 Rev A
22in Recycler® Lawn Mower
Model No. 20016—Serial No. 260000001 and Up
Operator's Manual
Introduction
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a dealer,
or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model and
serial numbers of your product ready. Figure 1 identifies the
location of the model and serial numbers on the product.
Figure 1
1. Model and serial number plate
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.
Figure 2
1. Safety alert symbol
This manual uses two words to highlight information.
Important
calls attention to special mechanical information
and
Note
emphasizes general information worthy of special
attention.
Warning
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
Important:
This engine is not equipped with a
spark arrester muffler. It is a violation of California
Public Resource Code Section 4442 to use or operate
the engine on any forest-covered, brush-covered, or
grass-covered land. Other states or federal areas may
have similar laws.
This spark ignition system complies with Canadian
ICES-002
The enclosed Engine Owner’s Manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
For models with stated engine horsepower, the gross
horsepower of the engine was laboratory rated by the engine
manufacturer in accordance with SAE J1940. As configured
to meet safety, emission, and operating requirements, the
actual engine horsepower on this class of lawn mower will
be significantly lower.
Safety
This lawn mower meets or exceeds the CPSC blade safety
requirements for walk-behind rotary lawn mowers and the
B71.1 specifications of the American National Standards
Institute in effect at the time of production.
Read and understand the contents of this manual
before you start the engine.
The safety alert symbol (Figure 2) is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Improperly using or maintaining this mower could result in
injury or death. To reduce this potential, comply with the
following safety instructions.
© 2005—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The following instructions have been adapted from theANSI/OPEI standard B71.1-2003. This cutting machine can amputate hands and feet andthrow objects. Failure to observe the following safetyinstructions could result in serious injury or death. General Operation • Read, understand, and follow all ins...
then refuel such equipment with a portable container,rather than from a gasoline dispenser nozzle. • Keep the nozzle in contact with the rim of the fueltank or container opening at all times until fueling iscomplete. Do not use a nozzle lock-open device. • If fuel is spilled on clothing, change clot...
Setup Important: Remove and discard the protective plastic sheet that covers the engine. 1. Unfolding the Handle Folding or unfolding the handle improperly candamage the cables, causing an unsafe operatingcondition. • Do not damage the cables when folding orunfolding the handle. • If a cable is dama...
