Thomson CS84 - Manual
Thomson CS84 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Information
- Page 3 – Table of Content
- Page 4 – Getting Started; Unpacking Your System; Connecting the Speakers; Using the Antenna
- Page 5 – General Controls
- Page 6 – Installing Batteries
- Page 7 – Settings; Display; Activating the Timer; Setting Sleep Time
- Page 8 – Sound Features; Preset Equalizer Curves; CD Player; Muting Audio; Loading a Disc; Playback
- Page 9 – Playing a Program List
- Page 10 – Radio; Selecting Tuner Band; Auto Preset Programming; Suppressing Stereo Signal
- Page 11 – Tape Player; Playing Cassette Tape
- Page 12 – Problem; Solution; Troubleshooting Tips
- Page 13 – Maintenance
- Page 14 – Don’t Infringe; Important Information
EN
Safety Information
For UK Only
CONNECT THE MAIN LEAD INTO A MAINS
POWER SOCKET
POWER SUPPLY
230V
. It must not be connected
to
D.C.
mains.
Note: The mains lead of the set is fitted with a
moulded plug. If the mains socket are not
compatible or if for any reason the plug is
removed please follow the directions below. The
moulded plug cannot be rewired and if removed
must be disposed of safely.
DO NOT under any circumstances plug the
severed plug into any mains socket as this could
result in electric shock.
Important:
If the plug is removed, rewire the
new plug as follow:
The wires in the mains plug are coloured in
accordance to the following code:
BLUE = NEUTRAL/BROWN = LIVE
If the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
BLUE
wire to the terminal coded N (Neutral) or
coloured black.
BROWN
wire to the terminal coded L (Live) or
coloured red.
DO NOT make any connection to
the terminal in the plug which is
marked
by the letter E or by the earth
symbol or coloured green or
green and yellow.
A fused plug must be
fitted with a 3A fuse
approved by ASTA or
BS1362 and fuse covers
must be always be
securely replaced. If
you set does not work,
the fuse may be
blown.
CS84 EN new
1/9/04, 2:13 PM
2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
EN Safety Information CAUTION! Invisible laser radiation when open. Avoidexposure to beam. Class 1 laser product. Thissystem must be opened only by qualifiedtechnicians to prevent accidents caused by thelaser beam.LASER λ = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit.This uni...
EN Table of Content Safety Information Getting Started .................................. 2 Unpacking Your System ................................... 2Installation ....................................................... 2 Connecting the Speakers ............................ 2Using the Antenna .........
EN Getting Started 2 Unpacking Your System You should have: • One main unit (with 2 speakers);• One remote control;• One user’s guide;• One Thomson Warranty Card Installation To ensure sufficient ventilation, keep the spacingshown as below: 10cm 10cm 10cm 10cm 5cm Connecting the Speakers When connec...
