Thomson CP-2016-007 - Manuals

1. Aura SoHo™ Conference Phone 2. Wall Adapter3. Phone Cable4. Main Cable5. 6’ Power Cord6. Warranty/Registration Sheet Package Contents Aura SoHo™ Conference Phone Wall Mounted Adapter and Power Supply Phone Cable 6’ Power Cord Main Cable 2

Aura SoHo™Conference Phone Design BUTTONS LEDs 1. Power On/Off 2. Mic Mute - Red 3. Mute4. Flash 5. Redial6. Volume Up/Down 7. Conference8. Hold CONNECTORSA. Main CableB. External Microphone Connector (for optional extra mics) C. RCA jack port for recoding or monitoring 1 2 3 4 5 6 7 8 3 A C B B Mic...

4 Wall Adapter For Wall Plug Back of Wall Adapter Mounting Holes Phone Cable Connector Main Cable Connector

Safety Precautions The Aura SoHo™ Conference Phone is an electrical product. As with any electrical product, observe reasonable precautions to avoid risk of fire or electrical shock. • Do not use this product near water, such as near a sink or bath tub, or in a wet area, such as in a wet basement. C...

6 Setup Setting up the Aura SoHo™ Conference Phone 1. Plug the power cord into the Wall Adapter. 2. Insert the power supply plug into an available electrical outlet.3. Connect one end of the included phone cable into the Phone Connector port on on the Wall Adapter. 4. Connect the other end of the ph...

7 Setup Phone into a digital phone network or it may damage the unit. You will need a Digital Phone Adapter Module in order to use the Aura SoHo™ Conference Phone with a PBX, available for purchase on our website, www.spracht.com. 5. Connect one end of the included Main Cable into the Main Cable Con...

8 Setup for VoIP Analog Adapter boxes IMPORTANT NOTICE : The Aura SoHo™ Conference Phone has echo and noise cancellation which is optimized for ANALOG telephone lines (land lines). If you have a standard Analog phone line, the instructions on this sheet do not apply to you. Please proceed to page 10...

9 Setup 2. Confirm the Aura SoHo™ Conference Phone is connected properly by pressing the Power button � . The keypad back light will go on and you will hear a dial tone. Wait for 5 seconds, then press the Power button � again to turn OFF the unit. 3. Next, you will be changing the Aura SoHo™ Confere...

Using the Aura SoHo™ Conference Phone TO MAKE A CALL Press the Power Button � to turn on the Aura SoHo™ Conference Phone, then enter the phone number for your call. ADJUST SPEAKER VOLUME Press the Volume Up ^ or Volume Down v button to adjust the speaker volume. ANSWER A CALL Press the Power Button ...

12 Reprogram Conference Number The Aura SoHo™ Conference Phone comes preprogrammed with the number for Spracht’s conferencing service provider. If you decide to use this service, all you have to do is press the CONF button to make a conference call. The Conference Center’s number is the factory defa...

13 in reprogram mode, press and hold the CONF button for 10 seconds. After 5 seconds, the backlight will come on; when the backlight starts flashing, you may release the CONF button.Enter the new Conference Center Phone Number. The maximum number of digits you can enter is 16, the minimum is 3. This...

14 INSTRUCTIONS FOR REPROGRAMMING THE FLASH BUTTON FOR INTERNATIONAL USE Where the Aura SoHo™ Conference Phone is “based” outside of North America Changing the region code is not recommended for end users. This procedure is either completed in Manufacting prior to shipment, or best done by a Service...

15 In Region Code programming mode, only the circled keys are active. Keypad Function Description FLASH button - Start the reprogramming process HOLD button - End the reprogramming process Number keys 1-9 - Region codes 1-9 Reprogramming Procedure 1. With the Aura SoHo™ Conference Phone in the On Ho...

16 Aura SoHo™ Conference Phone Order Information: Part Number CP-2016 Features Certifications: FCC part 68, UL, CE, VCCI, A-TICK, RoHS compliant Telephone connection: Analog PBX or standard analog PSTN line Digital PBX Modules: Available, support 100s of PBXs Microphone: 3 Noise cancelling 360° cove...

17 All information is believed to be reliable, however specifications are subject to change without notice. Spracht warrants its products against defects or malfunctions in material and workmanship under normal use and service, with the exceptions stated below. This warranty lasts for one year from ...

Interference Statement This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesir...