Thomson 610s - Manual

2 SpeedTouch TM 610 Remote Access Application Note Ed. 01 5 2 SpeedTouch TM 610 Remote Access Introduction The application note SpeedTouch TM 610 Operation and Maintenance described some of the standard access methods the SpeedTouch TM 610 provides to allow users to perform configurations and/or - i...

Application Note Ed. 01 2 SpeedTouch TM 610 Remote Access 8 2.2 Remote SpeedTouch TM 610 Web Interface Access Appropriate firewall rules To allow remote access to the SpeedTouch TM 610 web pages from the WAN, you must add following rules: • To the sink chain: The rule allows incoming traffic from th...

2 SpeedTouch TM 610 Remote Access Application Note Ed. 01 9 2.3 Remote SpeedTouch TM 610 Telnet Access Appropriate firewall rules To allow remote access to the SpeedTouch TM 610 Command Line Interface (CLI) via a Telnet session from the WAN to the SpeedTouch TM 610, you must add following rules: • T...

Application Note Ed. 01 2 SpeedTouch TM 610 Remote Access 10 2.4 Remote SpeedTouch TM 610 FTP Access Appropriate firewall rules To allow remote access to the SpeedTouch TM 610 File System via an FTP session from the WAN to the SpeedTouch TM 610, you must add two rules per chain: one rule for the FTP...

2 SpeedTouch TM 610 Remote Access Application Note Ed. 01 11 2.5 SpeedTouch TM 610 Controlled Access Introduction In sections “2.2 Remote SpeedTouchTM610 Web Interface Access” on page 8 , “2.3 Remote SpeedTouchTM610 Telnet Access” on page 9 and “2.4 Remote SpeedTouchTM610 FTP Access” on page 10 the ...

3 SpeedTouch TM 610 Syslog Application Note Ed. 01 13 3 SpeedTouch TM 610 Syslog Introduction Syslog is a basic, uncomplicated, yet powerful method to administer a network device as the SpeedTouch TM 610. By sending syslog messages, the SpeedTouch TM 610 is able to inform network managers about the ...

3 SpeedTouch TM 610 Syslog Application Note Ed. 01 17 3.2 Syslog via the Web Pages The SpeedTouch TM 610 Syslog web page The SpeedTouch TM 610 Syslog web page allows users to view all or a selection of syslog messages the SpeedTouch TM 610 generated. Simply browse to the SpeedTouch TM 610 web pages ...

Application Note Ed. 01 3 SpeedTouch TM 610 Syslog 18 3.3 Syslog via the CLI The Syslog CLI command group The SpeedTouch TM 610 CLI syslog command group basically provides the same possibil- ities as provided on the SpeedTouch TM 610 syslog web page: For more information on the syntax and use of the...

3 SpeedTouch TM 610 Syslog Application Note Ed. 01 19 3.4 Remote Syslog Notification Introduction As described before the SpeedTouch TM 610 can be configured to send all or a selection of generated syslog messages to a host on the local or a remote network IP address.This section describes how to co...

4 The SpeedTouch TM 610 SNMP Application Note Ed. 01 21 4 The SpeedTouch TM 610 SNMP Introduction Simple Network Management Protocol (SNMP) is a widely spread method for managing networks. Based on a client /server concept, the SNMP server (the SNMP manager) gets or sets the values of objects define...

Application Note Ed. 01 4 The SpeedTouch TM 610 SNMP 22 4.1 SpeedTouch TM 610 SNMP configuration SNMP Configuration There are a few settleable options covering the SNMP functionality. If no traps, sponta-neous messages sent from the SpeedTouch TM 610 to a manager, are required then all of the defaul...

Built for excellence 600 SERIES © 2002 THOMSON m ultimedia. All r ights r eserved. Appl ication N ote Ed. 01 www.speedtouch.com