Thomson 42PB120S4 - Manual

Understanding your set EN 5 Front panel Power (standby) button On / standby Status light OffWhen the TV set is connected to the mains, and themain power switch on the rear panel is on the OFFposition, the light is off. OrangeWhen the TV set is connected to the mains and the mainpower switch is on th...

Remote control EN 6 Most of your television’s functions areavailable via the menus that appear on thescreen. The remote control supplied withyour set can be used to navigate throughthe menus and to configure all the generalsettings. IMPORTANT:If the batteries in your remote control are rundown, you ...

Remote control EN 7 Using the remote control for other equipment The remote control supplied with your television can be used to control other appliances using the programmablebuttons VCR , DVD , SAT , AMP and AUX . For each button you can control the following appliances: VCR : video recorder DVD :...

Remote control EN 8 Programming the remote control Automatic code search This method can be used to automatically find the mostappropriate code for your appliance. 1. Switch on the appliance you wish to use the remotecontrol with. 2. Press the relevant button for this appliance on theremote control,...

Switching on EN 9 Please respect the environment and the relevant regulations. Before youdispose of batteries or accumulators, ask your dealer whether they requirespecial recycling and if he is able to take them back. Follow the instructions on this page to switch on the TV set and theremote control...

Channel set-up EN 10 Initial set-up The initial set-up involves setting all the parameters required to be ableto search and store all the channels you can receive in your area. Makesure that the TV set is switched on and follow steps 1 to 4. When youfirst switch the TV set on, the language selection...

Channel set-up EN 12 Manual installation You may want to to carry out a manual installation in case somechannels have not been stored during the initial set-up. Setting upchannels manually requires every setting to be entered, one at a time. Tocarry out a manual installation, display the OVERVIEW me...

General operation EN 13 Switching the set on and off To switch the TV set on, put the main power switch located at the rearon the ON position, then press the power button located on the frontpanel. When the set is on, the light on the front is green. Standby mode: press the power button on the front...

Adjusting the picture EN 14 Display the OVERVIEW menu using the MENU button. Select Picture and press OK to confirm. The PICTURE menu appears. The contents of this menu depends on the signal. In TV mode: Adjust the Brightness , Contrast , Colour and Sharpness settings as required. The Tint option is...

Adjusting the sound Display the OVERVIEW menu using the MENU button. Select Sound and press OK to confirm. The SOUND menu appears, which offers the following settings: The Sound type option allows to select the relevant sound type. Use the buttons to make a selection. The available options depend on...

Other functions EN 17 Sleep timer This function allows you to set an automatic shut-off time, from 0 to 4hours, with 15-minute steps. Press the red button on the remote control to activate the sleep timerfunction. A symbol appears on screen in front of the sleep time. If no timer has been set, then ...

Using the teletext EN 18 The Teletext service is available in many countries under a variety of names(TOP Text, Fastext, FLOF test, Videotext). It is provided as a free service bysome television broadcasters. This service provides a real wealth ofinformation, available at any time, on weather, sport...

Using the teletext EN 19 Teletext offers some other useful functions: Newsflash When a newsflash is detected, PAT is replaced by N . Press the blue button to display the newsflash. In the case of an update, Teletext isautomatically enabled and displays the new information. To display the header and ...

Connecting other equipment EN 20 Connecting a DVD player Using SCART (AV) socket input 1. Connect the SCART socket on the DVD player to a SCART socket(AV1 or AV2) on the rear panel of the set. Using component video input 1. Connect the green (Y), red (PR/CR), and blue (PB/CB) cinch sockets on the DV...

Connecting other equipment EN 21 Connecting external amplified speakers Connect the red (R) and white (L) audio out sockets located to the rightof the connector panel of the set respectively to the right and leftamplified speakers. Connecting an amplifier Connect the red (R) and white (L) audio out ...

Signal frequency information EN 22 In PC mode, you can press the yellow INFO button to access the display mode of the TV set. M. xx appears on screen. Please refer to the table below to get detailedinformation about the various display modes. Mode Horizontal Vertical Format Refresh rate 1 31.469 59....

Troubleshooting EN 23 No picture is displayed. 1. The power cord is disconnected. 2. The main power switch on the rear panel is on the OFF position. 3. The selected input has no connection. 4. The TV set is in standby mode in RGB mode. 1. Plug in the power cord. 2. Put the main power switch on the O...

Specifications EN 24 Display panel Screen size 42 inches Aspect ratio 16:9 wide Resolution 852 x 480 Power source Input voltage 100 ~ 240 V ac , 50 / 60 Hz Power consumption 240 W (average) Standby & power save 4 W Dimensions (W x H x D) 1200 x 648 x 22 Net weight 33 kg 42pb120S4-en 2/07/04 11:3...

Wall mount installation (optional) EN 26 Installation Step 1. Attach the horizontal supports (C and D) to theleft and right modules (A and B) using theappropriate screws (E). Step 2. Install the wall mount bracket onto the wall. Note: This package includes two different sets of screws - onefor mount...