Taylor 7344 - Manual

1.

Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a

mild soap. Never use detergents, excess water, treated cloths, harsh cleaning
agents, or sprays. Do not attempt to lubricate or open scale casing as this will
void your warranty.

2.

Although your scale is designed to be maintenance-free, it contains sensitive

electronic parts. Avoid rough treatment. Do not drop, kick, or jump on it. Treat
it with care to ensure the best performance.

3.

This scale is designed to read weights between 25 and 400 lbs / 12 and

180kgs / 2 and 28 st, 8 lbs. To prevent damage, do not place more than
400lbs / 180 kgs / 28 st, 8 lbs on it.

4.

Do not store scale where you store cleaning chemicals. The vapors from some

household products may affect the electronic components of your scale. Do
not store scale on its side.

5.

This scale is an extremely sensitive weighing device. In order to prevent run

down of the battery, do not store anything on the scale.

6.

“

Err

” display: Overload warning. The maximum weighing capacity has been

exceeded. Remove the weight immediately; otherwise, permanent damage to
the scale may occur.

7.

“

Lo

” display: Low battery warning. Replace the batteries. Always replace both

batteries at the same time; do not mix old and new batteries.

8.

Do not dispose of batteries in fire. Batteries may explode or leak. Remove the

batteries if the scale will not be used for a long period of time.

CP7344 5.09

There are no express warranties except as listed above. This warranty gives you
specific legal rights, and you may have other rights which vary from state to
state.
For additional product information, or warranty information in Canada or
elsewhere outside the USA, please contact us through www.taylorusa.com.

©2009 Taylor Precision Products and its affiliated companies, all rights reserved. Taylor®
and Leading the Way in Accuracy® are registered trademarks of Taylor Precision Products
and its affiliated companies. All rights reserved.

Made to our exact specifications in China.

Not legal for trade.

www.taylorusa.com

This scale is warranted against defects in materials of workmanship for five (5)
years for the original purchaser from date of retail purchase. It does not cover
damages or wear resulting from accident, misuse, abuse, commercial use, or
unauthorized adjustment and/or repair. Do not return to retailer. Should this
scale require service (or replacement at our option) while under warranty, please
pack the item in the original packaging and return it prepaid, along with store
receipt showing date of purchase and a note explaining reason for return to:

Taylor Precision Products

2220 Entrada Del Sol, Suite A

Las Cruces, New Mexico 88001 USA

Thank you for purchasing a Taylor® Electronic Scale. All of our precision
instruments for weight measurement are engineered and designed to meet the
highest quality standards …to assure you years of uncompromising accuracy and
consistently dependable, convenient performance. Please read this instruction
manual carefully before use. Keep these instructions handy for future reference.

1.

There are plastic strips under the Lithium battery cover to prevent battery

drain in shipping. Please remove the strips before continuing with these
instructions. Also, some models have a static cling label on the lens to prevent
scratching. Please remove before use.

2.

Your scale has been set at the factory to read weight in pounds. You may

select kilograms or stone units of measurement by moving the slide switch
within the battery compartment of the scale.

3.

Place scale on flat, hard surface. Carpeted or uneven floors may affect

accuracy.

4.

Step on the scale (disregarding the reading) and step off. This process insures

the scale is set and is now ready for use. Do this whenever the scale is moved.
At all other times step straight onto the scale.

5.

Your Taylor® Weight Management Scale will operate as a basic weight-

reading scale. No special programming steps are required. Simply step onto
the scale platform and remain still. The display will show “0.0”, then count up
to your weight. The display will flash three times when the weight is locked.
Your weight is now displayed.

6.

If you step off of the scale, the display will turn off automatically within 5

seconds. If you continue to stand on the scale, your weight will be displayed
for 10 seconds and then the scale will turn off automatically.

Your scale is equipped with Weight Tracking software that computes the
difference between your current weight reading and your previous weight
reading. Up to four individuals may track their weight changes by activating one
of the buttons numbered 1 through 4, located below the display.

Weight Management

Electronic Scale

General Operation and Weight Only Operation

Five (5) Year Limited Warranty

Precautions

Weight Tracking Operation

7344

Leading the Way in Accuracy

®