Page 3 - List of Contents
Preliminary Pages Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page iii ST.TM.E10100.1 List of Contents Chapter 1: Introduction This chapter identifies the equipment versions covered by this manual; describes the purpose of the equipment in a typical system; provides ...
Page 4 - Index
Preliminary Pages Page iv Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Index Forms Service/Repair Order Form
Page 5 - About this Manual; Issues of this Manual; Acknowledgements; General
Preliminary Pages Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page v ST.TM.E10100.1 About this Manual This manual provides instructions and information for the installation and operation of the TT1260 1U digital integrated Receiver/Decoder (IRD). It should be kept in...
Page 6 - Warnings, Cautions and Notes; Heed Warnings; Retain Instructions; EMC Compliance
Preliminary Pages Page vi Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Warnings, Cautions and Notes Heed Warnings All warnings on the product and in the operating instructions should be adhered to. The manufacturer can not be held responsible for injuri...
Page 7 - Contact Information; TANDBERG Television Customer Services; Support Services; Where to Find Us
Preliminary Pages Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page vii ST.TM.E10100.1 Contact Information TANDBERG Television Customer Services Support Services Our primary objective is to provide first class customer care that is tailored to your specific business a...
Page 8 - Technical Training; Training Courses; Customer Services and Technical Training Postal Address
Preliminary Pages Page viii Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Technical Training Training Courses TANDBERG Television provides a wide range of training courses on the operation and maintenance of our products and on their supporting technolog...
Page 9 - Chapter 1; Introduction; Contents; List of Figures
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 1-1 ST.TM.E10100.1 Chapter 1 1. Introduction Contents 1.1 Scope of this Manual................................................. 1-3 1.1.1 Who Should Use this Manual ....................... 1-31.1.2 What this Manual Des...
Page 10 - List of Tables
Introduction Page 1-2 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 List of Tables Table 1.1: Hardware Marketing Codes ...........................................1-4Table 1.2: Software Key Marketing Codes .....................................1-4 Table 1....
Page 11 - Scope of this Manual; Who Should Use this Manual; What this Manual Describes; Identifying the Equipment
Introduction Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 1-3 ST.TM.E10100.1 1.1 Scope of this Manual 1.1.1 Who Should Use this Manual This manual is written for operators/users of the TT1260 Professional Receivers and Decoders. It describes the unit’s functions ...
Page 12 - Software Versions; versions
Introduction Page 1-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Marketing Codes Table 1.1 gives a description of each hardware Marketing Code and Table 1.2 gives a description of each software key Marketing Code. Table 1.1: Hardware Marketing Codes O...
Page 14 - Summary of Features; Main Features
Introduction Page 1-6 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 1.2 Summary of Features 1.2.1 Main Features The TT1260 is fully compliant with the appropriate sections of the MPEG-2 1 , DVB-S 2 and DSNG 3 specifications and offers the following featu...
Page 16 - ALARM
Introduction Page 1-8 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 · Control Methods: ² Front Panel User Interface ² Asynchronous serial remote control ² Over-air remote control (TANDBERG Director system) (optional) 1.2.2 Inputs ASI Inputs (Decoders) Tw...
Page 17 - Conditional Access and Scrambling
Introduction Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 1-9 ST.TM.E10100.1 There is a 25-way D-type connector on the optional Alarm Relay Card (TT1260/HDC/ALRM) with six relays for failure monitoring for NCP over-air. The operator can define (using the Alarm Me...
Page 18 - The Satellite Receiver; Typical Satellite System
Introduction Page 1-10 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 1.3 The Satellite Receiver 1.3.1 Typical Satellite System The TT1260 Satellite Receiver is a component of the MPEG-2/DVB compliant range of TANDBERG Television equipment. It is designed...
Page 19 - Input Connections; What the Satellite Receiver Does
Introduction Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 1-11 ST.TM.E10100.1 1.3.2 Input Connections The Satellite Receiver interfaces directly to Low-Noise Block (LNB) and accepts an intermediate frequency (IF) input in the band 950 - 2150 MHz (L-band) for oper...
Page 20 - Over-air Software Download
Introduction Page 1-12 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 1.3.4 Over-air Software Download (TANDBERG Director Systems) The TT1260 Satellite Receiver is shipped with the appropriate software installed, but it is designed to allow replacement of...
Page 21 - The Decoder; Typical Decoder System
Introduction Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 1-13 ST.TM.E10100.1 1.4 The Decoder 1.4.1 Typical Decoder System The Decoder is a component of TANDBERG Television’s range of equipment. It is designed for use by broadcasters and distributors of video and...
Page 22 - What the Decoder Does
Introduction Page 1-14 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 1.4.2 Input Connections The Decoder has the following inputs:Two ASI copper interfaces for operation up to 160 Mbit/s for 188 byte packets and 160 Mbit/s for 204 byte packets. 1.4.3 Wha...
Page 23 - Navigate; Serial Remote Control Mode; REMOTE; TANDBERG Director NCP Control Mode
Introduction Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 1-15 ST.TM.E10100.1 1.5.2 Front Panel (Local) Modes Operating the IRD from the Front Panel is via two main operating modes: Navigate and Edit . See Section 3.3, Front Panel Operating Modes . Figure 1.8: Fr...
Page 24 - Guided Tour; Construction; Front Panel LEDs
Introduction Page 1-16 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 1.6 Guided Tour 1.6.1 Construction The TT1260 is constructed using a screened self-ventilated modular system; all operational inputs and outputs are via rear-panel connectors. The unit ...
Page 25 - Conditional Access and Scrambling Options; VideoGuard Director; BISS Mode 0; Rear Panel
Introduction Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 1-17 ST.TM.E10100.1 1.6.5 Conditional Access and Scrambling Options VideoGuard Director There is a slot on the rear panel to allow the insertion of a Conditional Access (CA) card for the VideoGuard Directo...
Page 27 - Chapter 2; Installing the Equipment
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 2-1 ST.TM.E10100.1 Chapter 2 2. Installing the Equipment Contents 2.1 Read This First!......................................................... 2-3 2.1.1 Handling...........................................................
Page 29 - Handling; Preliminary Checks; Mechanical Inspection; Moving the Equipment Safely
Installing the Equipment Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 2-3 ST.TM.E10100.1 2.1 Read This First! 2.1.1 Handling The TT1260 must be handled and installed carefully and thoughtfully to prevent safety hazards and damage. 2.1.2 Installing the Equipment E...
Page 30 - Fixing; Openings in the Covers; Care in Positioning
Installing the Equipment Page 2-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 2.3 Installing the Equipment 2.3.1 Fixing The TT1260 is designed for fixed use only and has been shipped with fixing brackets suitable for a standard 19 inch rack. When insta...
Page 31 - Protection from Moisture; Installing Cables - Safety; EMC Compliance Statements; FCC; AC Supply Operating Voltage and Fusing -; AC Power Supply
Installing the Equipment Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 2-5 ST.TM.E10100.1 Protection from Moisture Do not install this equipment in areas of high humidity or where there is a danger of water ingress. 2.3.3 Installing Cables - Safety Power supply ca...
Page 32 - AC Power Supply Cord; Wire Colours
Installing the Equipment Page 2-6 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 WARNINGS… 1. THE TT1260 SHOULD ONLY BE OPERATED FROM THE TYPE OF POWER SOURCE INDICATED ON THE MARKING LABEL. IF YOU ARE NOT SURE OF THE TYPE TO YOUR BUSINESS, CONSULT YOUR A...
Page 33 - Connecting the Equipment to the AC Power Supply; Technical Earth Connection
Installing the Equipment Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 2-7 ST.TM.E10100.1 Table 2.2: Supply Cord Wiring Colours UK (BS 1363) EUROPE (CEE 7/7) USA (NEMA 5-15P) Earth: Green-and-yellow Green-and-yellow Green Neutral: Blue Blue White Live: Brown Brown...
Page 34 - Signal Connections
Installing the Equipment Page 2-8 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Figure 2.3: Location of the Technical Earth 2.7 Signal Connections 2.7.1 General CAUTION... It is strongly recommended that the terminal marked at the rear panel of the equip...
Page 36 - Rear Panel View; Audio Outputs
Installing the Equipment Page 2-10 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 2.7.2 TT1260 Base Unit (TT1260/DIRBAS) Rear Panel View Figure 2.6: Typical Decoder Rear Panel, with ASI Input and Alarm Option Fitted ASI Out Two BNC sockets output ASI tran...
Page 37 - Analogue Video Output
Installing the Equipment Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 2-11 ST.TM.E10100.1 Table 2.5: Audio Decoding Pin-outs Item Specification Connector type 9-way, Female, D-type Connector designations AUDIO 1AUDIO 2 Pin-outs Pin 1 ¾ Digital audio + Pin 2 ¾ Gro...
Page 38 - Frame Synchronisation; Ethernet
Installing the Equipment Page 2-12 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Frame Synchronisation A BNC socket is used by the Decoder to frame lock to an external video source. The frame information is input as a composite synchronise signal, with o...
Page 39 - Remote Control; Alarm Connector and Relay
Installing the Equipment Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 2-13 ST.TM.E10100.1 Remote Control Connect to a PC and use the System Menu #6.1.2 to switch between the RS-232 and RS-485 input standards. The specification for this connector is given in Secti...
Page 40 - RS-232 Low-speed Asynchronous Data Output
Installing the Equipment Page 2-14 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 RS-232 Low-speed Asynchronous Data Output A 9-way, D-type female connector provides an asynchronous serial communications interface for the reception of low-speed data. The ...
Page 41 - Connector Details
Installing the Equipment Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 2-15 ST.TM.E10100.1 Connector Details Alarm Option The specification for this connector is given in Annex B, Section B.5.5, Alarm Connectors. 25 1 ALARM OPTION Table 2.13: Relay Alarm Output Sp...
Page 42 - Option Card Connectors
Installing the Equipment Page 2-16 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 2.8 Option Card Connectors Option cards are described in Chapter 5, Options.
Page 43 - Chapter 3; Operating the Equipment Locally
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-1 ST.TM.E10100.1 Chapter 3 3. Operating the Equipment Locally Contents 3.1 Powering the Equipment ........................................... 3-3 3.1.1 Switching On................................................. 3-...
Page 45 - Powering the Equipment; Switching On
Operating the Equipment Locally Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-3 ST.TM.E10100.1 3.1 Powering the Equipment 3.1.1 Switching On CAUTION... This equipment should not be operated unless the cooling fan is working and there is free-air flow around the ...
Page 46 - Power-up Operating Modes
Operating the Equipment Locally Page 3-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 3.1.2 Power-up Operating Modes No TT1260 INITIALISING is displayedduring power-up. The Alarm LEDand Lock LED illuminate briefly Yes Secondary Flash code is loaded Is t...
Page 47 - Front Panel Controls and Pushbuttons; Front Panel Operating Modes
Operating the Equipment Locally Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-5 ST.TM.E10100.1 3.2 Front Panel Controls and Pushbuttons Front Panel items are described under Section 1.6, Guided Tour.When the Front Panel pushbuttons are not used for approximately...
Page 48 - Edit Mode; (abort edit with no save) or when Save is pressed (save modified; out and return to Navigate mode.
Operating the Equipment Locally Page 3-6 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 3.3.3 Edit Mode Edit mode edits the right display area and allows the user to alter control parameters that define the TT1260 behaviour. To enter Edit mode press the E...
Page 49 - Using the Local Controls; LCD Menu Descriptions; Entering a Menu Value
Operating the Equipment Locally Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-7 ST.TM.E10100.1 3.4 Using the Local Controls 3.4.1 LCD Menu Descriptions Detailed LCD menu descriptions are given in Annex C, Menus. This chapter concentrates on describing the use of...
Page 50 - Satellite Receiver; Decoder
Operating the Equipment Locally Page 3-8 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 3.5 Setting Up the Input (Menu #2) 3.5.1 Satellite Receiver Use Table 3.5 to step through the set up procedure of the Satellite Receiver using Menu #2. The transmissio...
Page 51 - Selecting a Service; Setting Up a Service; Setting Up the Power-up Service; Selecting the Video Component
Operating the Equipment Locally Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-9 ST.TM.E10100.1 3.6 Service Configuration (Menu #3) 3.6.1 Selecting a Service Setting Up a Service Each transport stream may contain many Services. Menu #3 allows a Service to be chos...
Page 52 - Selecting the Audio Component
Operating the Equipment Locally Page 3-10 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 5 Scroll down to Menu #3.1.7 and edit theparameter for framesync enable (ENABLEDor DISABLED). Press SAVE. Edits the parameter for framesync enable. 6 Scroll down to M...
Page 53 - Selecting the Audio Manually; Setting Up Async Data/Sync Data
Operating the Equipment Locally Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-11 ST.TM.E10100.1 Selecting the Audio Manually It is possible to manually select any audio component from the active service by using the front panel controls or via the remote control...
Page 54 - Setting Up Teletext; Setting Up VBI
Operating the Equipment Locally Page 3-12 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 3.6.5 Setting Up Teletext The teletext data is transmitted in teletext PES packets. It uses its own PID to extract the teletext PES packets from the transport stream....
Page 55 - Viewing the PCR PID Menu; Viewing the Network ID Menu; Setting Up the Conditional Access/Scrambling
Operating the Equipment Locally Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-13 ST.TM.E10100.1 3.6.7 Viewing the PCR PID Menu Table 3.14: Viewing the PCR PID Menu Step Action Result 1 Go to Menu #3.7.XXXX is the PCR PIDYYYYYYYYYY is (PRESENT or NOTPRESENT) Gain...
Page 56 - VideoGuard, RAS and BISS
Operating the Equipment Locally Page 3-14 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 · Periodic control word changes during transmission. VideoGuard, RAS and BISS The process for setting this up is as for the RAS CA. Changing the VideoGuard Customer I...
Page 57 - Setting up the Transport Stream Output (TSO); Packet Lengths
Operating the Equipment Locally Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-15 ST.TM.E10100.1 3.6.10 Setting up the Transport Stream Output (TSO) Set-up Procedure Use Table 3.5 to step through the set up procedure of the Satellite Receiver using Menu #2.Use Ta...
Page 59 - Restarting the Unit; Using Preset Services
Operating the Equipment Locally Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-17 ST.TM.E10100.1 Step Action Result 5 Scroll down to Menu #6.1.4 and edit theSubnet Mask. Press SAVE. Edits the Subnet Mask. 6 Scroll down to Menu #6.1.5 andactivate/deactivate the Re...
Page 60 - Setting up a Preset Service
Operating the Equipment Locally Page 3-18 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 3.10.2 Setting up a Preset Service Follow the steps in Table 3.22 to store the current Service as a preset. Table 3.22: Setting up a Preset Service Step Action Result...
Page 61 - Chapter 4; Alarms
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 4-1 ST.TM.E10100.1 Chapter 4 4. Alarms Contents 4.1 Introduction ............................................................... 4-3 4.2 Location of the Alarm and Indication LEDs ............... 4-3 4.3 ALARM LED ........
Page 63 - Location of the Alarm and Indication LEDs
Alarms Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 4-3 ST.TM.E10100.1 4.1 Introduction There are two Front Panel LEDs that indicate the status of the TT1260. These are used to indicate abnormal performance of the unit. 4.2 Location of the Alarm and Indication LE...
Page 64 - Relays
Alarms Page 4-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 4.4 Relays In addition to the one summary alarm, there is an Alarm Relay Card (TT1260/HDC/ALRM) with additional six relays. The alarm relays are programmable to reflect the state of one or mor...
Page 65 - Chapter 5; Options
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 5-1 ST.TM.E10100.1 Chapter 5 5. Options Contents 5.1 Option Card Locations .............................................. 5-3 5.2 ASI Input Card (TT1260/HWO/ASI) .......................... 5-3 5.2.1 General ..............
Page 67 - Option Card Locations
Options Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 5-3 ST.TM.E10100.1 5.1 Option Card Locations The functionality can be enhanced with the inclusion of option cards. Each card consists of a horizontally mounted PCB with rear panel connector(s). The cards are fi...
Page 71 - High Speed RS-422 Data Enabler Card
Options Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 5-7 ST.TM.E10100.1 5.4.3 Connector Details The active input is chosen using the Input Status Menu (#2). The specification for this connector is given in Annex B, Section B.4.2, 8PSK/16QAM Satellite Receivers. T...
Page 73 - Signal Protection Conditional Access
Options Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 5-9 ST.TM.E10100.1 5.6 QPSK/8PSK/16QAM (TT1260/SWO/16QAM) This option provides a software key license for TT1260/HWO/HM, enabling QPSK, 8PSK, and 16QAM.The key is downloaded via the Ethernet or entered via the ...
Page 74 - VideoGuard Director CA/TANDBERG Director
Options Page 5-10 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 5.10 VideoGuard Director CA/TANDBERG Director NCP (TT1260/SWO/DIR) This option provides a software key to enable VideoGuard Director CA/TANDBERG Director NCP.The key is downloaded via the Et...
Page 75 - Chapter 6; Preventive Maintenance and
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 6-1 ST.TM.E10100.1 Chapter 6 6. Preventive Maintenance and Fault-finding Contents 6.1 Routine Checks ......................................................... 6-3 6.1.1 Cooling Fan ........................................
Page 77 - Routine Checks; Cleaning; Servicing; Conditions Requiring Servicing
Preventive Maintenance and Fault-finding Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 6-3 ST.TM.E10100.1 6.1 Routine Checks 6.1.1 Cooling Fan There are no routine checks associated with this equipment other than to ensure that the unit is adequately cooled. This ...
Page 78 - Replacement Parts; Maintenance and Support Services - Warranty
Preventive Maintenance and Fault-finding Page 6-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 4. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions...
Page 79 - Changing the Equipment Fuse
Preventive Maintenance and Fault-finding Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 6-5 ST.TM.E10100.1 6.4 Fault-finding 6.4.1 General The information contained in this chapter is intended to isolate the unit as the faulty equipment if a system failure occurs. ...
Page 81 - Disposal; Moulded Plugs; Equipment
Preventive Maintenance and Fault-finding Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 6-7 ST.TM.E10100.1 6.6 Disposal 6.6.1 Moulded Plugs If the moulded plug fitted to the mains cable supplied with this equipment is not required, use another cable. If the supplie...
Page 83 - Annex A; Glossary
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page A-1 ST.TM.E10100.1 Annex A A. Glossary The following list covers most of the abbreviations, acronyms and terms used in TANDBERG Television Limited Manuals. All terms may not be included in this manual. m m Micrometre (...
Page 93 - Annex B; Technical Specification
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-1 ST.TM.E10100.1 Annex B B. Technical Specification Contents B.1 Output B-3 B.1.1 International Television Standards ............... B-3B.1.2 Video............................................................. B-4 Sup...
Page 95 - Output; International Television Standards
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-3 ST.TM.E10100.1 B.1 Output B.1.1 International Television Standards Two composite video outputs are provided at the rear panel. These carry identical video. The standard is selectable to PAL-...
Page 96 - Video; Supported Video Resolutions
Technical Specification Page B-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 B.1.2 Video Supported Video Resolutions The TT1260 supports MP@ML and 4:2:2P@ML with video resolutions described in Table B.3. Table B.3: Supported Video Resolutions 625-line,...
Page 97 - Vertical Blanking Signals; Audio Decoding and Output Stage
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-5 ST.TM.E10100.1 Vertical Blanking Signals The TT1260 range of Receivers and Decoders support the following VBI reinsertion and signalling: · VBI streams · VPS data and pass through · WSS data...
Page 98 - MPEG Audio; Audio Output Format
Technical Specification Page B-6 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 B.2.2 MPEG Audio The TT1260 supports decoding of MPEG audio as follows: · Compression layers: MPEG-1 layers I and II · Sampling rates (kHz): 32, 44.1, 48 · Maximum compressed ...
Page 99 - Analogue Audio; Digital Audio
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-7 ST.TM.E10100.1 B.3.2 Analogue Audio The TT1260 supports level control of the audio outputs. Independent control of each output of each stereo pair is provided via the User Interface and remo...
Page 100 - Dual Mono; Supported Audio Bit-rates
Technical Specification Page B-8 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 · Right to both (right signal to left and right outputs) B.3.6 Dual Mono Where a dual mono service is available (i.e. stream 1 and stream 2 sharing the same PID), it is possib...
Page 101 - Analogue Audio Performance; Digital Audio Outputs; Internal Decoder
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-9 ST.TM.E10100.1 B.3.10 Analogue Audio Performance Table B.8: Analogue Audio Performance Parameter Performance Voltage gain adjustment ± 1 dBm Maximum undistorted output (terminated with 600 W...
Page 102 - Input Specifications; QPSK Satellite Receivers
Technical Specification Page B-10 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 B.5 Input Specifications B.5.1 QPSK Satellite Receivers General Table B.10: QPSK Satellite Receiver Input Specification Parameter Specification L-band input Safety status SEL...
Page 103 - LNB Power and Control
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-11 ST.TM.E10100.1 Table B.11: QPSK L-band Satellite Input — Eb/N 0 Ratio Convolutional FEC Rate Receive Eb/N 0 Ratio (dB min) in IF Loop for Correct MPEG-2 System ½ 4.5 2 / 3 5.0 ¾ 5.5 5 / 6 6...
Page 104 - PSK/16QAM Satellite Receivers
Technical Specification Page B-12 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 B.5.2 8PSK/16QAM Satellite Receivers Table B.13: QPSK/8PSK/16QAM Satellite Receiver Input Specification Parameter Specification L-band input Safety status SELV Number of inpu...
Page 107 - Frame Sync Connector; Output Specifications; Video Outputs; Analogue Composite Video
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-15 ST.TM.E10100.1 B.5.4 Frame Sync Connector The Decoder can frame lock to an external video source. The frame information is input as a composite synchronous signal, with or without active vi...
Page 108 - Digital Video
Technical Specification Page B-16 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Digital Video These connectors are located on the motherboard of the TT1260 Base Unit (TT1260/DIRBAS). Table B.21: Digital Video Output Connectors Item Specification Safety s...
Page 109 - Data Outputs
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-17 ST.TM.E10100.1 B.6.3 Data Outputs RS-232 Asynchronous (Low-speed) Data This connector is located on the motherboard of the TT1260 Base Unit (TT1260/DIRBAS). Table B.23: RS-232 Asynchronous ...
Page 110 - Alarm Connectors
Technical Specification Page B-18 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 B.6.5 Alarm Connectors Table B.26: Relay Alarm Output Specification Item Specification Connector designation: ALARM Connector type: 9-way D-type female for the summary alarm ...
Page 111 - Environmental; Conditions; Power Supply
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-19 ST.TM.E10100.1 B.7 Environmental B.7.1 Conditions Table B.28: Environmental Conditions Operational Temperature 0 ° C to +45 ° C (+32 ° F to +113 ° F) ambient air temperature with free airfl...
Page 113 - Compliance; Safety
Technical Specification Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page B-21 ST.TM.E10100.1 B.9 Compliance 14 B.9.1 Safety This equipment has been designed and tested to meet the requirements of the following: EN 60950 European Safety of information technology equip...
Page 114 - CE Marking
Technical Specification Page B-22 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 B.9.3 CE Marking The CE mark is affixed to indicate compliance with the following directives:89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States re...
Page 115 - Annex C; Menus
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-1 ST.TM.E10100.1 Annex C C. Menus Contents C.1 LCD Menus ...............................................................C-3 C.1.1 Using the Menus...........................................C-3C.1.2 Menu Descriptions ....
Page 117 - LCD Menus; Using the Menus; Menu Descriptions; Menu Pages - Main Menu
Menus Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-3 ST.TM.E10100.1 C.1 LCD Menus C.1.1 Using the Menus Detailed description of the use of menus is given in Chapter 3, Operating the Equipment Locally. C.1.2 Menu Descriptions This annex describes the front panel...
Page 118 - The Menu Tree
Menus Page C-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 C.3 The Menu Tree Figure C.1: Menu Tree Presets Menu TT1260 Initialising SWITCH ON Boot Screen 5.1 Satellite BER alarm setup5.2 Transport Stream alarm setup5.3 Video alarm setup5.4 Audio 1 alar...
Page 119 - The Input Status menu is the primary menu group for the TT1260.; ASI Menu; The ASI submenu allows the user to edit the ASI input source.
Menus Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-5 ST.TM.E10100.1 C.4 Presets Menu Items (#1) The Presets menu contains up to 40 editable preset numbers in the range 01 – 40. Selecting a Service via the Presets menu automatically reconfigures the TT1260. Wher...
Page 120 - QPSK Satellite Menu; The QPSK Satellite submenu accesses the QPSK parameters.
Menus Page C-6 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 C.5.2 QPSK Satellite Menu The QPSK Satellite submenu accesses the QPSK parameters. Table C.5: QPSK Satellite Menu Display title: QPSK Satellite Description Quality PV BER -1 -3 -51.0 E-8 XXXXXX...
Page 122 - Video Menu
Menus Page C-8 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Display title: Service Description Section Teletext The Teletext submenu contains information about the audioformat and quality of the currently decoded audio stream on theprimary output. C.6.5...
Page 123 - Audio 1 Menu
Menus Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-9 ST.TM.E10100.1 Display title: Video Description MAGENTA STEP & FLAT (NTSC)FLAT FIELD RED (NTSC)LUMINANCE RAMP (NTSC)BOWTIE (NTSC)100% COLOUR BARS (NTSC)MULTI PATTERN (NTSC)BLACK (NTSC) Framesync XXXXXXXYY...
Page 124 - Audio 2 Menu; Async/Sync Data Menus; The Async/Sync Data submenu allows status monitoring and
Menus Page C-10 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 C.6.3 Audio 2 Menu The Audio 2 signal status submenu contains information about the audio format and quality of the currently decoded audio stream on the secondary audio output. Table C.10: Au...
Page 125 - Teletext Menu; VBI Menu; The VBI status submenu displays the current status of the VBI
Menus Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-11 ST.TM.E10100.1 Table C.12: Sync Data Menu (High Speed RS-422 Data Enabler Card Fitted) Display title: Sync Data Description WW Streams PID XXXXYYYYYYYYYYY WW is the number of High speed data streams presentX...
Page 126 - PCR PID Menu; The PCR PID submenu displays the Program Clock Reference packet; Network ID Menu; The Network ID submenu displays the network ID and the Original
Menus Page C-12 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Display title: VBI Description Video Index XXXXXXXXXXXYYYYYYY ZZZZ XXXXXXXXXXX indicates the presence of Video Index data (PRESENT, NOTPRESENT)YYYYYYY is the editable parameter for enabling Vi...
Page 127 - RAS Mode Menu; The RAS Mode submenu displays the status of the RAS mode and allows; Signal Protection Menu
Menus Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-13 ST.TM.E10100.1 C.7 Conditional Access Menu (#4) The Conditional Access submenu contains the current status of the smart card, and also lists the effect the smart card has for the currently selected component...
Page 128 - Director Menu
Menus Page C-14 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 C.7.3 Director Menu The Director submenu displays all Director status and version information and allows editing of the customer ID and local lock pins. Table C.20: Director Menu Display title...
Page 129 - BISS Mode 1 Menu; Broadcaster ID Menu; The Broadcaster ID submenu displays the status of the current; Transport Stream Output Menu
Menus Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-15 ST.TM.E10100.1 C.7.4 BISS Mode 1 Menu The BISS Mode submenu allows editing of the control word keys for the BISS user IDs. Table C.21: BISS Mode 1 Menu Display title: BISS Description Mode YYYYYYYYYYKey XXXX...
Page 130 - The Alarms menu provides a summary of the alarm status.; Satellite BER Alarm Setup Menu
Menus Page C-16 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 C.8 Alarms Menu (#5) The Alarms menu provides a summary of the alarm status. Table C.24: Alarms Menu Display title: Alarms Description Section Satellite BER Alarm Setup Satellite BER alarm and...
Page 131 - Transport Stream Alarm Setup Menu; Video Alarm Setup Menu
Menus Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-17 ST.TM.E10100.1 C.8.2 Transport Stream Alarm Setup Menu Table C.26: Transport Stream Alarm Setup Menu Display title: Alarms Description IF NO TRANSPORT STREAMYYYYYYYYYYYYYYY YYYYYYYYYYYYYY is editable:NO ALAR...
Page 132 - Audio 1 Alarm Setup Menu; Audio 2 Alarm Setup Menu
Menus Page C-18 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 C.8.4 Audio 1 Alarm Setup Menu Table C.28: Audio 1 Alarm Setup Menu Display title: Description IF AUDIO 01 NOT RUNNINGYYYYYYYYYYYYYY YYYYYYYYYYYYYY is editable:NO ALARMSET ALARM ONLYSET ALARM ...
Page 133 - Setup Menu; The Setup submenu allows the user to edit the operating mode, LCD
Menus Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-19 ST.TM.E10100.1 C.9 System Menu (#6) Table C.30: System Menu Display title: System Description Section Setup The Setup submenu allows the user to edit the operating mode,LCD contrast, serial remote protocol, ...
Page 134 - IRD Details Menu; System Restart Menu; The System Restart submenu allows the user to perform a software
Menus Page C-20 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 C.9.2 IRD Details Menu The IRD Details submenu diplays the software, firmware, hardware, PLD version and electronic serial number of the IRD. Table C.32: IRD Details Menu Display title: IRD De...
Page 135 - Annex D; Using the TT1260 with the TANDBERG
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page D-1 ST.TM.E10100.1 Annex D D. Using the TT1260 with the TANDBERG Director System Contents D.1 Configuring the TT1260 for Use With Director ..........D-3 D.1.1 Getting Started...............................................
Page 137 - Configuring the TT1260 for Use With Director; Getting Started; Using the TT1260 in the Over-air Mode
Using the TT1260 with the TANDBERG Director System Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page D-3 ST.TM.E10100.1 D.1 Configuring the TT1260 for Use With Director D.1.1 Getting Started You must have VideoGuard CA, a Director Smart Card and be tuned to a Director...
Page 138 - Response to Over-air Commands; Force Carrier Retune
Using the TT1260 with the TANDBERG Director System Page D-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 D.2 Response to Over-air Commands D.2.1 General This section describes the Receiver’s response to over-air commands. D.2.2 Display On-screen Display...
Page 139 - Force Service Selection; Set Emergency Channel; Abort NCP Command
Using the TT1260 with the TANDBERG Director System Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page D-5 ST.TM.E10100.1 D.2.6 Force Service Selection Forces the Receiver to decode a different service or stored channel (which may require a retune). The command is gener...
Page 141 - Annex E; Language Abbreviations
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page E-1 ST.TM.E10100.1 Annex E E. Language Abbreviations The TT1260 supports the following languages. These are shown in alphabetical order. NO LANGUAGE ABBREVIATION 5 ARABIC ARA BASA BAS 14 BENGALI BEN 135 CHINESE CHI 19 ...
Page 143 - Annex F; Factory Defaults
Page F-1 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 Annex F F. Factory Defaults Units are shipped with the following factory default parameters. These can be restored at any time using the System Menu. All other parameters are unaffected by restoring ...
Page 145 - Annex G; Quick Reference Guide
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page G-1 ST.TM.E10100.1 Annex G G. Quick Reference Guide Contents G.1 Setting Up the Input ................................................. G-3 G.1.1 Satellite Receiver ......................................... G-3G.1.2 De...
Page 147 - Setting Up the Input
Quick Reference Guide Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page G-3 ST.TM.E10100.1 G.1 Setting Up the Input G.1.1 Satellite Receiver Table G.1 steps through the setting up the Satellite Receiver using Menu #2 Input, and the QPSK 1 and 2 inputs. The transmissio...
Page 148 - Service Configuration; Setting Up the Service Hunt Mode
Quick Reference Guide Page G-4 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder ST.TM.E10100.1 G.2 Service Configuration G.2.1 Setting Up a Service Each transport stream may contain many Services. Menu #3 allows a Service to be chosen as current and the parameters of its ...
Page 149 - Loading a Preset Service
Quick Reference Guide Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page G-5 ST.TM.E10100.1 G.2.3 Setting up a Preset Service Follow the steps in Table G.5 to store the current Service as a preset. Table G.5: Setting up a Preset Service Step Action 1 Set up a service a...
Page 157 - PROFORMA INVOICE
PROFORMA INVOICE INVOICE NO:DATE:YOUR REF:OUR REF: SENDER : CONSIGNEE: TANDBERG TELEVISION ASA PHILIP PEDERSENS VEI 20 N-1366 LYSAKER NORWAY SHIPPED PER: TNT (Account 237067) DELIVERY ADDRESS: TANDBERG TELEVISION REPAIR C/O HADELANDPRODUKTER AS TERMS OF PAYMENT: N/C, RETURN FOR SERVICE/REPAIR MOHAGE...
Page 158 - Repair/service Order Form; TNT
Side 1 av 1 TANDBERG Television Systems AS , Phillip Pedersens vei 20, P.O.BOX 322, N-1326 LYSAKER, Norway Tel: +47 67116200,Fax: +47 67116201 Repair/service Order Form (Non Norwegian Customers) Delivery is to be done by TNT . TANDBERG Television's TNT account is 237067. The unit(s) must be shipped ...