TANDBERG MPS800 - Manual
TANDBERG MPS800 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
MPS 800 Gateway Kit Installation
1
Use the rear panel power switch to
switch off the MPS power.
2
Insert the new Gateway board
into the first available slot in the front panel.
3
Connect a LAN cable from the Ethernet socket
of the board just installed and to your network.
4
Turn the MPS power back on.
D13903.02
5
The system is ready for configuration once the
Power and the Active LED are green and the initial
configuration menu appears on the LCD.
Send the MPS serial No. to your TANDBERG
Representative. You will then receive the
option key needed to activate the new
boards.
Access the TANDBERG MPS by entering
the IP-address of the Gateway Board in
a standard web browser to complete the
configuration of the new Gateway Board and
upload the new Gateway option keys. See the
below Fig. and the MPS User Manual for more
information.
MPS
Serial
No.
Label
6
Click the
Restart
button.
7
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
